Replace your worn hydraulic trailer brake with this 10" x 2-1/4" Dexter uni-servo assembly. Built for 3,500-lb axles, it includes a parking brake lever for trailers that need extra holding power when parked.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer. Let's take a quick look at this Dexter hydraulic passenger side drum brake with parking brake. Now this Dexter hydraulic drum brake is going to be a complete replacement brake assembly for the passenger side of your trailer, with a 3,500 pound axle. This is designed to fit 10 inch in diameter by two and a quarter inch wide drums, and it's going to work with hydraulic surge brake systems. Now one of the main things that sets this assembly apart is going to be the parking brake lever that you see right here. And then this is going to provide the normal hydraulic braking while traveling forward.
It's also going to allow the trailer to have additional holding power when it's parked, because of that parking brake lever. That's going to make the parking brake feature an important consideration when determining whether this is the right replacement for your particular trailer. This is a uni servo or single servo brake assembly. And because it comes as a complete assembly, you're replacing the brake shoes and the springs, the wheel cylinder and the related brake hardware together, rather than replacing those worn components individually. Of course, fitment's going to be the biggest thing to verify before picking this up.
This particular brake again is specifically for the right-hand side or the passenger side assembly. And as you can see here, this has a sticker indicating that it is the right-hand side assembly. Most newer assemblies will have a sticker, but if you're maybe replacing your assemblies, and you have one and you're not too sure which is which because it doesn't have that sticker, the easy way to find out if you have a left or right-hand assembly, is for looking for the shortest brake pad. The shorter brake pad is what's considered to be the primary brake pad, the brake pad that's going to always point to the front, whereas the rear brake pad is going to be longer, as you can see here. So our shorter brake pad or our primary brake pad is here.
And so that's going to point to the front. So as you can see, that's going to go on the passenger or right-hand side of that trailer. So that's a very easy way to determine which side is which. So again, this is rated for 3,500 pounds, 10 inch by two and a quarter inch drum. And if you are also looking for the driver's side, we have that as well.
So on your screen, I've got the part number for the driver's side assembly. You can just take that part number, put it in the search field of our website. That will take you to the driver's side and you can add that to your order as well. One other thing I wanted to mention, if you want help with installation, on this product page underneath the photo section, we have a link that will take you to our installer locator. Click that link, answer the questions that it has for you. And that locator will find an installer in your area that etrailer has partnered with, to install this for you. Well, again, my name's Andy. Thank you for joining me.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.