Picking Out Fenders for Trailer that Stick Out 7 inches from Frame
Updated 06/03/2020 | Published 06/02/2020
Products Featured in This Question
Question:
Im having a challenge finding the correct-fitting fenders and brackets that would fit my trailer that I just purchased. It didnt come with fenders so I have no reference and the dimensions provided on-line dont provide enough information to clearly decide. Hopefully the pictures I am sending give you enough to assist. I was looking at your #CE19500-2 or J10821 and cannot tell if theyd work and if so, which brackets would be needed if any. Thanks in advance!
asked by: Scott G
Expert Reply:
For the width you have between your trailer frame and the outer edge of your tire the fender part # CE19500-2 you mentioned would work great. Then for fender brackets the part # CE26065PGA would be all you'd need and you'd be set.
Continue Researching
- Shop: Hellwig Adjustable Rear Anti-Sway Bar - 3/4" Diameter
- Video: Review of Hellwig Anti-Sway Bars - Adjustable Rear Anti-Sway Bar 3/4 Inch - HE99FR
- Shop: Hellwig Rear Anti-Sway Bar - 1-1/8" Diameter
- Search Results: wheel only
- Search Results: trailer tires and wheels
- Search Results: wheel
- Video: A Closer Look at the Mounting Brackets for Trailer Fender
- Video: Installation: Hellwig Adjustable Rear Anti-Sway Bar on a 2023 Toyota Tacoma
- Video: In-Depth Review of the CE Smith Single Axle Trailer Fenders
- Video: In-Depth Review of the Curt Trailer Hitch Receiver Lock
- Shop: Mounting Brackets for Trailer Fender - 8" to 12" Wheels - Pre-Galvanized Steel - Qty 2
- Shop: Curt Trailer Hitch Receiver Lock - 2" and 2-1/2" Hitches - Stainless Steel
- Shop: CE Smith Single Axle Trailer Fenders - Gray Plastic - 8" to 12" Wheels - Qty 2
- Search Results: fender mounts
- Q&A: Does Rear Bumper Panel of 2018 Dodge Durango Install After Draw Tite Hitch # DT38MR Installs
- Shop: CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1
- Video: This Old Trailer: Replacing Leaf Springs
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Video: Mount: Draw-Tite Max-Frame Trailer Hitch Receiver on a 2021 Jeep Grand Cherokee
- Q&A: How Long Of An Axle Do I Need For My Trailer
- Q&A: How to Determine Correct Hub for Boat Trailer With 3,500 lb Axle
- Q&A: Do Suspension Hangers Need to Welded on Or Can They be Bolted On
- Q&A: How to Identify Compatible Hubs for Vintage Utility Trailer
- Q&A: Should Trailer Axle have Bend In it that Faces Downward
- Shop: Brake Controller
- Shop: Trailer Wiring
- Shop: Trailer Hitch