bing tracking image
  1. Vehicle Suspension
  2. Air Lift
  3. Air Springs
  4. Towing/Load Leveling
  5. Rear Axle Suspension Enhancement
  6. Standard Duty
THIS ITEM IS NOT A FIT FOR
2008 Chrysler 300C
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Air Lift

Air Lift Ride Control Air Helper Springs - Rear Axle

Part Number: AL59551
In Stock
$428.99
Retail:$590.99
You Save: $162.00
Vehicle Suspension
Not Confirmed to Fit

2008 Chrysler 300C

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
2,000-lb Capacity. Level your vehicle when you're hauling a heavy load with these Ride Control air springs. The adjustable springs improve overall stability and ride quality, eliminate rear sag, and reduce strain on your factory suspension. Great Prices for the best vehicle suspension from Air Lift. Air Lift Ride Control Air Helper Springs - Rear Axle part number AL59551 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (294)
  • Q & A (0)
  • Videos (1)
  • Photos

Air Lift Vehicle Suspension - AL59551

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • 2,000-lb Load Support: Levels your vehicle and stops rear sag when towing or hauling heavy loads.
  • Better Steering and Braking: Keeps your suspension balanced so handling stays safe and predictable.
  • Custom Air Pressure Control: Adjust 5–100 psi to match your load and keep ride quality comfortable.
  • Stays Level Side to Side: Inflate springs independently to even out off-center or uneven cargo.
  • Simple DIY Setup: Mounts between frame and leaf springs with included brackets, tubing, and valves.
Made in USA

Features to know about

Keep Your Ride Level and Confident: Up to 2,000 lbs of Load-Leveling Support

Heavy cargo or a loaded trailer can make the rear sag and throw off your steering and braking. The Air Lift Ride Control air springs add up to 2,000 lbs of load-leveling support between the frame and leaf springs, keeping your vehicle at normal ride height even with heavy weight on board. With the truck sitting level, you’ll maintain proper headlight aim, steady handling, and even tire wear every time you tow or haul.

Dial In the Perfect Ride: Adjustable Air Pressure from 5 psi to 100 psi

Every load is different, and these air springs let you fine-tune pressure for the right balance of comfort and control. Inflate both sides evenly to level front to rear, or adjust each spring independently to correct off-center loads. Manual Schrader valves make pressure changes easy so you can run high psi for towing or drop it down when driving unloaded. It’s a simple setup that adapts to whatever you’re carrying.

Smooth Out the Bumps: Less Sway and Shock Under Load

Heavy loads can make a vehicle bounce or sway on rough roads. These adjustable air springs absorb road shock and help reduce sway for a more stable ride. By taking strain off your factory suspension, they improve braking response and steering feel, keeping your rig steady through curves and over uneven pavement.

DIY Friendly Installation: Straightforward Setup with Included Alignment Tool

Installing suspension support shouldn’t be complicated. The Ride Control system bolts in between the frame and leaf springs using the included brackets, tubing, hardware, and alignment tool that centers each spring for proper clearance. The manual inflation valves mount on the bumper or wherever is convenient. If you want more control later, you can add a compressor system with in-cab gauges (sold separately) for automatic pressure adjustment.

Long-Term Confidence: Lifetime Warranty and 60-Day Satisfaction Guarantee

Once installed, these air springs are built to last with no mileage limits on their lifetime warranty. They’re designed to handle years of towing and hauling while keeping your suspension protected. And with Air Lift’s 60-day satisfaction guarantee, you can run them knowing you’ve got dependable support behind you mile after mile.

Specs

Weight and Capacity

  • Load-leveling capacity: up to 2,000 lbs

Adjustability

  • Adjustable air pressure: 5 psi - 100 psi

Warranty

  • Lifetime warranty
  • 60-Day satisfaction guarantee

59551 Airlift Ride Control Air Bag Suspension Support System - Back Axle

Installation Details AL59551 Installation instructions

This Product Fits The Following Vehicles




Video of Air Lift Ride Control Air Helper Springs - Rear Axle
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Air Lift Vehicle Suspension - Ride Control Air Helper Springs Rear Axle - AL59551

Hi, everybody, Andy here with etrailer. Let's take a quick look at these Air Lift Ride Control Air Helper Springs for your rear axle. Now this kit has been designed to fit your 2002 to 2008 Dodge Ram 1500s. And on custom fit parts such as this kit, I do recommend taking advantage of our vehicle fit guide here at etrailer. Simply input the year, make, and model of your vehicle and answer any other questions that that fit guide might have for you, and it will confirm if this kit will work for you or if we have something comparable that will work for you. Now this airbag suspension kit is going to install on the back axle of your Ram, and it's gonna help your Ram handle heavy loads when towing or hauling, and it's gonna help handle those loads in a more safer and comfortable way.

Now this kit is going to give you this pair of these small air springs that are going to sit between the frame and the rear leaf springs. And I do kind of have them just kind of put together here with the custom fit brackets to kind of give you an idea of how this is going to be put together on your truck. And so, when the back of your truck starts to sag under the weight, like when you're hauling tools, equipment, or pulling a trailer, these airbags are gonna give your rear suspension extra support. And the nice thing is that you can adjust them. If you're loaded down, you can just add air to these bags to stiffen them up.

And then if you're driving on empty, you're gonna be able to let some air out for a more normal, comfortable ride. Now this system can give you up to 2,000 pounds of load leveling support, which is gonna help keep your truck riding level. It's going to reduce bouncing and bottoming out, it's gonna improve steering and braking control as well. It is important to note, however, that this doesn't actually increase your truck's actual weight carrying capacity or tow rating. This just helps your suspension manage the load better for a safer, more controlled, more comfortable ride.

Now this kit does come with everything that you see here. You're gonna get airline, you're going to get fittings, you're gonna get hardware, and of course, not only the rubber airbags here, but the custom fit brackets along with instructions to guide you through the installation process. If you happen to have any other questions, whether it's about this kit or anything else that we have here at etrailer, don't hesitate to reach out. Ultimately, we wanna make sure that you're getting exactly what you need. Well, again, my name is Andy.

Thank you for joining me.

Ratings & Reviews

4.6

294 reviews
5 Stars
(236)
4 Stars
(36)
3 Stars
(8)
2 Stars
(5)
1 Star
(9)
Review Sort Icon
by:
Relatively easy to install. Tow a 32 foot rv with a standard hitch this made a big difference in towing and keeping the level right with improved ride quality while towing.
by:
2004 Dodge Ram Pickup
was easy to install, I was afraid that drilling into the frame of my truck would have been difficult, but it wasn't and the rest of the install went just as easy. My wife and I were able to make our trip towing our car hauler without any problems. etrailer was easy to deal with. couldn't be happier. Thanks to everyone at etrailer that made this happen
by:
2007 Dodge Ram Pickup
by:
I love this system. It is perfect for leveling up my truck when hauling and towing.
Lazer S. profile picture
Etrailer Expert

Lazer S.

6/24/2026

Glad you like it, Scott! What are you typically towing?

by:
toyota Tacoma
These have been awesome and totally changed my truck. I have a 1st Gen (2000) Tacoma. These have allowed me to load/tow right up to max recommended weight. Before these the truck was scary to drive when it was 1/2 loaded. It is much safer and easier to drive now. I love being able to add air when I need it. Since I already had a lift kit on the truck, the installation required me to fab a small bracket to make things fit, but it wasn't a big deal. Customer support was excellent answering questions.
by:
2024 GMC Canyon
This kit is exactly what I wanted. The weight of my trailer tongue varies between 150# and 300#, depending on the loading of the trailer. I need the ability to account for the trailer tongue weight. This air lift kit allows me to easily level the truck with air pressure to account for various loads whether in the truck or trailer. PS - ETrailer.com is the place to purchase. They are an excellent business with great support.
Pf profile picture

Pf

5/2/2026

Great! Ive used air lift kits on 5 different vehicles. I always purchase the kit specifically recommended for the respective vehicle. I highly recommend them.

by:
Great system installation was not too hard. I drive a Ford E150 van full of tools, and it was sagging in the rear now I'm ridding level again and going over speed bumps without bouncing all over the place. Nice system at a good price.
Nick S. profile picture
Etrailer Expert

Nick S.

10/13/2025

That is great to hear, and it looks nice on that E150! I am glad its got you back to level, and instead of speed mountains they are back to normal speed bumps without all the movement lol. Did you install yourself?

Stacey profile picture

Stacey

10/13/2025

@NickS Yes, I installed it myself. I do a lot of installations on boats wiring, gauges, motors etc. So not to hard .
Nick S. profile picture
Etrailer Expert

Nick S.

10/15/2025

@Stacey I wish I could say the same lol. Props to you!
by:
I was pulling a heavy trailer and wanted the airbags for stabilization and leveling. It worked even better than I expected. Was very easy to install too took less than two hours.
by:
1999 Toyota Tacoma
It was pretty straight forward it took me a bit longer to install but I was being overly cautious. Also a bit hesitant to drill holes in the frame but after installing it, i wasn't to worried about it. My friend ordered the same set up for his toyota and we'll be installing it the week. It helps the ride wether you are hauling or empty. I give it 5 stars on installation and final performance.
by:
2019 GMC Canyon
I bought these to take the bounce out of the truck when pulling my front end heavy enclosed trailer. Worked fantastic. Kit came with everything needed and only took about 30 minutes to install.
Brooke M. profile picture
Etrailer Expert

Brooke M.

6/11/2025

Way to go on the install! Glad these have worked well for you :) would you have any install advice for anyone combing the reviews for helpful tidbits?

by:
Product was as advertised, and the install went smoothly. Toyota Tacomas are infamous for sagging rear ends, and these air springs handle that well. For now I can only comment on installation, as I've yet to load the truck with a heavy trailer. All parts can be mounted comfortably by jacking up the rear axle and removing a wheel. I didn't have any alignment troubles, and the instructions were specific to these parts and my truck. Buyers should be aware that air springs require regular checks to make sure they are inflated to a minimum pressure. I can easily reach in and squeeze the spring to check inflation, and it's faster than pulling out a pressure gage.
Carl B. profile picture

Carl B.

4/22/2021

Ive now crossed the country several times with a 2,500 lb travel trailer. The air springs leveled the truck well, and no one flashes their high-beams at me anymore after dark. I will concur with the review below that the truck now bottoms out much sooner when empty and with reduced pressure in the springs. That may be normal, but its literally shocking and unexpected.

by:
chevrolet Colorado
2024 Chevy Colorado Trail Boss. These Airbags far exceeded my expectations. Installation was straightforward and took less than an hour to install.
I carry a lot of tools and equipment in my bed and these airbags keep my truck level. I put 30 PSI in each bag and haven’t lost any pressure in 2 months since they were installed.
I highly recommend this product. Also awesome Customer service when ordered
by:
great company to work with, they sent me a new air bag when mine had a leak and the shipping was fast. the install was a little difficult, had to drill holes in the frame. i have the silverado 1500 classic 07 so most aftermarket parts need some modifications anyways. i’m now able to haul comfortably without “trailer squat”
Caroline profile picture

Caroline

11/18/2023

5 stars! My truck not only hauls trailers better but also drives smoother. The bags have held up very well and are surprisingly durable I’m hard on my truck.

Mike L. profile picture
Etrailer Expert

Mike L.

11/20/2023

@Caroline We're glad your Air Lift helper springs are working well for you!
by:
The AirLift system we talked about a couple weeks ago was sent to my daughter, Kristi's house. I installed it yesterday. I'm on the road, which isn't the best place to do the installation. My father in law didn't have any socket wrenches so I started with a couple 9/16 open end wrenches. These don't work for everything. I went to the local hardware store and bought what I needed. The driver side went on much easier. The hardest bolt was the top one requiring the socket wrench to hold the nut inside the frame. I had to feel for the nut since it was hidden next to an existing frame bolt. I was able to simply jack the back of the truck up at the hitch to gain clearance. I didn't have to remove the wheels. The nylon lock nut was fun to tighten. AirLift should have supplied a simple wrench for this. I found a vice grip needle nose plier worked well enough.

Here are three photos. First is passenger side, second tries to show where top nut goes, third is drivers side. I have then filled to 28psi and will check them this morning.
by:
Ford F-150
2019 F150 FX4 W/suspension level kit. Straight forward install. Easily leveled the truck back out while towing a 24' bay boat with bed loaded down too. recommend for similar applications!
by:
1997 Nissan Leaf
I found needs to be extremely helpful. I have a 1997 Econoline 150 Ford van. It was a conversion van so lots of extra weight. The back leaf springs were obviously struggling as it rode low without a trailer or any significant load. After installing the air springs, and charging them 1/3 of capacity Or 35 PSI, the ride drastically improved. Shortly after installing them I pulled a 24 foot trailer with a medium load on it, and it drastically improved the ride compared to pulling a trailer previously. Highly recommended and cheaper than new high-quality leaf springs.
by:
Yeah really good. I haul heavy wet firewood often. 2000lbs is a guess in my Toyota pickup. That weight not possible without these airbags. They get used often. No leaks. Really happy with them. Love carrying a bike pump around and pumping up after weight is on. Instal wasn't too bad as I recall. Has to bring out the grinder for a second or two.
by:
2015 Chevrolet Colorado
Install these on my 2015 Chevy Colorado. I pull a fairly big travel trailer and although it's no problem pulling it I had noticed that over the last couple of years the rear of the truck was gradually sagging more. The AirLift fixed it right up.
The ride now inspires more confidence and I definitely have more control over the whole rig.
Installation was fairly easy. I'm pretty handy but quite green when it comes to vehicles so I would say it's accessible to anyone with a handy thumb. I even managed to install them without removing the wheels. It took a bit longer and required more up and down with the car jack but since I did it a couple of hours at a time over a couple of days it allowed me to still drive during the installation process.
I'm am a huge fan and would recommend it to anyone.
by:
2008 Hummer H3
I purchased and installed this kit on my 2008 Hummer H3 Alpha to assist the rear springs for towing my heavy jet ski trailer, and it preformed flawlessly. Straightforward install, great quality product, and the bags are holding up really well to the abuse I've put them through. I definitely recommend this kit to anyone considering purchasing it for their rig.
by:
2012 Ford F-150
Product arrived in just a couple of days and was very easy to install. Only took an hour. When I filled the system with air I found a leak on the bag itself. Called Rebecca at etrailer and she gave me the number to air lift and she would check with me in a couple of days. I called airlift and had a new bag in two days. Rebecca did email me and ask if everything was ok. Hooked the camper up and tried it out and man did it work great. This was a great buying experience and will soon purchase the on board air compressor from etrailer
by:
2022 Chevrolet Colorado
Great experience working with everyone at etrailer. Very helpful and attentive to what I needed. Thanks again to all of their team!
by:
Chevrolet Astro
The product is as described. My springs are starting to sag and I wanted to return the ride without replacing the springs. I was able to adjust the ride. This will definitely help when loaded or trailering.
The install was good with the instructions, but note that the hardened steel frame sleeve (2003 GMC Astro) was a bear to drill through and chewed up drill bits. Just a note for your install. Had it on for three days. I'll update review if things change.
by:
Install was simple. Took me 2 1/2 hours by myself, plus my buddy 1 hour to weld on a nice bracket for the air valves on the back bumper (see pics). Instructions were confusing and nomenclature did not match parts, but I eventually got it figured out. There are also two spots in the instructions that tell you not to tighten certain nuts down so that you can adjust the bags later, but it never tells you when or how to tighten them later.

I recommend you jack up the rear axle and remove the rear tires so you have plenty of room to move around and install this.

System looks really nice on the pickup, and you can hardly tell there's anything on there unless you are looking closely. Even while almost empty, the bags push the rear of the pickup up a little bit which looks cool. And it seems to ride smoother now too. I have not tried it with pulling cargo or a trailer yet, and will update this review if I don't notice anything good.
by:
Had this kit installed by pros. It seems to work as advertised on my E150 Ford van
by:
2023 Toyota Tacoma
Overall the install went well. I had to cold bend the upper brackets to fit properly. The upper bracket has an oval cut out to receive the top of the airbag. A nylon nut and serrated washer is used to connect the airbag to the upper bracket. I didn't like the fact that that connection could slide back and forth in the oval. So I cut a piece of plate to fit in the oval and welded it. Then I set both upper and lower brackets in place figured out the layout and drilled around hole to receive the upper nipple of the airbag. Rock solid set up that way. The truck is in the process of receiving an aluminum flatbed.
25
294
true
Show More Reviews

See what our Experts say about this Air Lift Vehicle Suspension

  • Rear Suspension Enhancement System for a 2006 Dodge Ram 1500 Carrying a Truck Bed Camper
    When looking into rear suspension enhancement systems, one factor that you will want to consider is the type of load that you want to support. If your load will be a consistent size and weight, such as a pickup camper or trailer, then the Timbren springs are an excellent option. If you frequently haul loads that vary in size and weight, then the air bag suspension systems would be more ideal because they can adjust to different load sizes. If you primarily need the suspension enhancement...
    view full answer...

Info for this part was:

Employee Tricia G
Updated by:
Tricia G
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Noah M
Updated by:
Noah M
Employee Andy C
Installed by:
Andy C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924