See what our Experts say about this Firestone Accessories and Parts

• Can 2006 Chevy Silverado 2500 with Lift Install Firestone Air Bag Kit
  Hey Fili, so we do have solutions for air bag kits on trucks that are lifted like yours but it comes down to knowing by how much the vehicle was lifted to pick out the correct spacer. So what is your best solution is to go with a Firestone air bag kit like the part # F2250 and then measure the distance between the Firestone brackets once they are installed. Bracket Spacing (in.) 6.5 to 7.5-inches use spacer # F2536 7.5 to 8.5-inches use spacer # F2366 8.5 to 9.5-inches use spacer #...
  view full answer...
• Best Airbags for a 2005 Chevrolet Silverado 2500HD with 6 Inch Lift
  For your 2005 Chevrolet Silverado 2500HD, I recommend the Firestone Ride-Rite Air Helper Springs part # F2250. These airbags will do an excellent job of helping to distribute the weight of the trailer across the vehicle in addition to helping with stability and off center loads. Now in order to compensate for the 6" lift on your vehicle, you will need to add a spacer. The correct spacer for you will depend on the distance you have between the upper and lower brackets once installed....
  view full answer...
• Will Firestone F2582 Ride-Rite Air Helper Springs Change Ride Height of 2019 Ford F-150
  At the 5psi minimum recommended by Firestone, installing their # F2582 Ride-Rite kit will not change your existing ride height, as long as your suspension isn't worn and is in good working order. If the suspension is worn, it could slightly raise the ride height. Also, you might need a lift spacer depending on how much lift has been added. If the lift is less than 1-1/2 inches, you won't need a lift spacer, according to Firestone. If the lift is greater than 1-1/2 inches, you will need...
  view full answer...
  
• How To Tell What Size Firestone Lift Spacers Are Needed On A Truck With A 6 Inch Lift Kit
  To determine what size lift spacer to use on your vehicle with Firestone Ride-Rite Air Springs, measure the distance between the upper and lower brackets of your air helper spring kit, and whether the kit mounts on the leaf spring or the axle. The spacer needs to be the same length as the amount of lift applied to the axle on which the air helper spring is installed. The axle mount kit would have the lower bracket mounted to the axle. The leaf mount kit would have the lower bracket mounted...
  view full answer...
• Firestone Air Bag Kit and Compressor Recommendation for 2017 Ford F-250 with 6 inch Lift
  Firestone has 6 inch spacer kit for use with their kits as part # F2374. But you have to determine first if your lift is all suspension or if it's a body lift and suspension lift combination which is most common on lifts of your size. Basically the spacer you'll need is the amount the suspension height changed. So let's say your lift was a 4 inch suspension lift with a 2 inch body lift. Then you'd need the 4 inch spacer part # F2370. I also attached a link to a page that has all of the...
  view full answer...
• Spacer Kit to Use with Firestone Ride Rite Kit for 2016 GMC Sierra Denali with 4 inch Lift
  Hey Jim, yes since you have a 4 inch lift you would need spacers to install the Firestone Ride Rite 7500 kit part # F2709. The correct 4 inch spacer kit would be the part # F2370 and you'd be set.
  view full answer...
• Best Air Bag Kit And Compressor System For 2023 Ram 3500 With 4" Lift
  Hello Troy, you came to the right place. We do have an air bag kit and compressor system that will work on your 2023 Ram 2500. You can use a spacer to compensate for the 4" lift. Here is what I recommend: - Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2615 - Firestone Air Command Heavy Duty Air Compressor - Remote and Smartphone App - Single Path # F56VV - Lift Spacers for Firestone Ride-Rite Air Helper Springs - 4" Spacers - Qty 2 # F2370 The Ride-Rite...
  view full answer...
• Are Any Additional Parts Needed To Install Air Springs On A Lifted 2018 Ford F-350
  Hey Michael, A 6" lift doesn't always equate to a 6" spacer so you'll need to measure the distance between the mounting brackets to determine the correct lift spacer: Between 6-1/2" and 7-1/2" # F2536 Between 7-1/2" and 8-1/2" # F2366 Between 8-1/2" and 9-1/2" # F2367 Between 9-1/2" and 10-1/2" # F2370 Between 11-1/2" and 12-1/2" # F2374 The Firestone Airide Red Label Extreme Duty Air Helper Springs # F95FV would be the correct kit for your 2018 Ford F-350 and would be compatible with...
  view full answer...
• Determining The Correct Spacers For Firestone Ride-Rite Springs On A 2018 Ford F-250 With 4" Lift
  Adding in lift spacers is totally normal when a vehicle has a suspension lift so you'll just need to determine which spacer is going to be the best to fill in the gap left by the lift. A 4" lift doesn't always mean that you'll have a 4" gap so you'll need to first install the upper and lower brackets and then measure the distance between them. You can then look at the chart (pictured below) and pick the correct spacer kit for the gap. 1-1/4" # F2536 2" # F2366 3" # F2367 4" # F2370...
  view full answer...
  
• How to Measure To Determine Correct Firestone Lift Spacers for Ride-Rite Kit on 2018 Nissan Frontier
  To determine if lift spacers are needed to install the Firestone Ride-Rite Air Helper Springs # F2558 on your 2018 Nissan Frontier SV 4x4, you'll need to measure the distance between the top and bottom mounting brackets (see photo). Make sure your truck has all four wheels on ground or is up on jack stands and there is no load on the bed. You will then select the right spacer using the following measurements: 6.5" - 7.5" distance between brackets - use 1.25" lift spacer # F2536 7.5" -...
  view full answer...
  
• What Size are the Air Bags for Firestone Ride-Rite Red Label for a 2019 Ram 2500
  For your 2019 Ram 2500 the correct Firestone Ride-Rite Red Label air bag kit is part # F2706. The air bags in the kit have a maximum diameter of 7.52 inches at the widest point, compressed height of 3 inches, and extended height of 8.91 inches. However if your truck is lifted a spacer may be required to make up for the additional height. I have attached a photo of where to measure, and once you find that distance you can choose from the following if a spacer is needed. 6-1/2" - 7-1/2"...
  view full answer...
  
• Correct Lift Spacer for Ride Rite Kit F2299 with 6 Inch BDS Lift
  The correct size lift spacer you will need for your Firestone Ride Rite airbags depends on how much the BDS Lift Kit will lift the rear of the vehicle. If the kit lifts the rear of your truck by 3 inches, then you would want a 3 inch spacer, # F2367. I'm not sure if I found the same kit you are purchasing or not, but in my research I found some BDS 6 inch kits that use a 4 inch lift for the rear. If the kit lifts the rear of the truck by 4 inches, then you would want a 4 inch spacer, # F2370.
  view full answer...
  
• Are Air Lift Ride Control Air Helper Springs Compatible with Air Lift Spring Cradles
  Thanks for checking in with us, Bryan! The Air Lift Ride Control Air Helper Springs # AL59530 will need to be installed on a stock-height vehicle because the Air Lift Air Helper Spring Cradle # AL59DQ along with their spacer kits are only compatible with their standard air bag kit solutions. If you needed to install an air bag kit that utilizes spacers for a lift kit then you'll want to go with the Firestone Ride-Rite Air Helper Springs # F2245 instead. Then to choose the correct spacer...
  view full answer...
• Can Firestone Air Bags be Installed on a 2001 Ford Excursion that Does Not have Jounce Bumpers
  To install Firestone Ride-Rite air bags # F2251 on a 2001 Ford Excursion 4x4 the jounce bumpers would have to be removed and are not reinstalled. So not having the jounce bumpers actually saves you a step for the installation. I also recommend using a compressor kit, # F2158, so you can add or remove air from the air bags from inside the vehicle. The kit is not required but makes load leveling a lot easier. If the 5 inch block you mentioned means that the frame is 5 inches further away...
  view full answer...
• Correct Firestone Ride Rite Kit for 2014 Toyota Tundra with 4 inch Lift
  The correct Firestone Ride Rite kit for your 2014 Toyota Tundra is the part # F2445 and then since you have a 4 inch lift you would need the spacer kit part # F2370 as well and you'd be set.
  view full answer...
• Suspension Enhancement Recommendations For A 2016 GMC Sierra 2500 With A 3.5 inch Suspension LIft
  When it comes to installing Suspension Enhancement on your 2016 GMC Sierra 2500, The Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2613 will fit your vehicle. It has a 5,000 pound capacity , and enhance your factory suspension for safety and stability when you are hauling heavy loads. It prevents permanent sagging and excessive friction in your leaf springs Since your 2016 GMC Sierra 2500 has a 3.5 inch lift you would need The Lift Spacers for Firestone Ride-Rite...
  view full answer...
  
• How to Choose Lift Spacer for Firestone Air Bag Kit on a 2019 Ford F-250 Super Duty with 2" Lift
  The Firestone air bag kits that fit the 2017 Ford F-250 4x4 will also fit the 2019 model year: Standard - # F35FV Red-Label - # F95FV Since you have a lift on your truck it sounds like you need a lift spacer to make the system fit. Firestone has put together a formula that you can use to help you determine what kind of spacer you need. To figure out the needed spacer simply measure the distance between where the brackets would be and choose from the following: 6-1/2" - 7-1/2" - Lift...
  view full answer...
• Recommended Firestone Air bag Kit For a Lifted 2002 Ford F-350
  The Firestone Ride-Rite Air Helper Springs # F2590 will definitely fit your 2002 Ford F-350 Dually, but the lift will need a few extra parts to get it installed. First and foremost, the stock jounce bumper spacers must still be on the vehicle for installation. From there, you will need to select the correct spacer to coincide with the amount of lift you have on the vehicle like the Firestone # F2366. This does not mean a 2 inch lift uses a 2 inch spacer, however. You will need to go off...
  view full answer...
• Air Bag Kit Recommendation for 2016 Ford F-250 4x4 with 4 inch Lift
  For your 2016 Ford F-250 4x4 the correct Firestone Ride Rite kit is the part # F2703 that you referenced as this is a confirmed fit for your truck and is also compatible with an in-bed hitch like your 5th wheel setup. Since you have a 4 inch lift you'd also want the 4 inch spacer block kit part # F2370 which takes up the extra space between the frame and the axle that the lift kit created. You'd want to verify for sure that your lift does give you an additional 4 inches of lift as sometimes...
  view full answer...
• Recommended Air Springs For A 2020 GMC Sierra 2500 Denali With 6" Cognito Lift And Fox Suspension
  Firestone air bags, like the Firestone Ride-Rite Air Helper Springs # F2613 are a great choice for helping support the suspension of your 2020 GMC Sierra 2500 Denali. These springs have a 5,000lb capacity and bolt on design, with no drilling required. They're also compatible with in-bed hitches so you can still tow a 5th wheel or gooseneck trailer. As for the need for a spacer, lift kits don't always create the same amount of gap so honestly the best way to determine the correct spacer...
  view full answer...
  
• Spacers for Firestone Ride-Rite Air Bags on a 2003 Ford Excursion with 4 Inch Lift
  The 2 Firestone spacer kits that you mentioned, # F2371 and # F2370, each fit different types of Firestone Ride-Rite kits. First, style # F2371 fits on Ride-Rite models that mount to the vehicle axle. The other one, # F2370, fits on models that mount to the leaf spring stack. The kit that you have, # F2251, is an axle mounted kit so you would need spacers # F2371. The spacer kit used needs to be same as the amount of lift on the vehicle. So if the ride height increased by 4 inches you...
  view full answer...
• Picking Out Spacer Kit for Firestone Air Bag Kit that Fits 2013 GMC Sierra 1500
  Since not all 6 inch lift kits are the same what you'll need to do first is install the Firestone kit part # F2430 and then measure the distance between the upper and lower brackets of the kit. Distance between top and bottom bracket: 6-1/2" - 7-1/2" - Lift Spacer # F2536 7-1/2" - 8-1/2" - Lift Spacer # F2366 8-1/2" - 9-1/2" - Lift Spacer # F2367 9-1/2" - 10-1/2" - Lift Spacer # F2370 11-1/2" - 12-1/2" - Lift Spacer # F2374 Typically 6 inch lifts require the # F2370 so I'd almost guarantee...
  view full answer...
• Spacer Kits for Firestone Air Bag Kit on Truck with Lift Kit
  We have lift spacers designed to be used on lifted trucks with our Firestone kits like the part # F95FV which take up the extra space created by the lift kit so that the air bags engage like needed. We have 2 inch spacers # F2366, 4 inch spacers # F2370, and 6 inch spacers # F2374.
  view full answer...
• Will Firestone Air Bag Helper Springs Fit a 2008 Ford F-350 with 4 Inch Lift
  Since your 2008 Ford F-350 has a 4 inch lift you will need spacers # F2370 to install Firestone air bags # F2550. This is assuming you have a suspension lift that moves the truck frame further away from the axle. If you have a body lift then you will not need the spacers.
  view full answer...

Do you have a question about this Accessories and Part?