bing tracking image
  1. Roof Rack
  2. Yakima
  3. Platform Rack
  4. Complete Roof Systems
  5. Black
  6. 60L x 54W Inch
Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 60" Long x 54" Wide
Special Savings on Select Yakima Products.
Yakima

Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 60" Long x 54" Wide

$718.97
Roof Rack
Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima accessories. Mounts to your existing roof rack crossbars. Great Prices for the best roof rack from Yakima. Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 60" Long x 54" Wide part number Y05045-39 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (69)
  • Q & A (0)
  • Photos

Yakima Roof Rack

  • Platform Rack
  • Yakima
  • Complete Roof Systems
  • Black
  • 60L x 54W Inch

Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima accessories. Mounts to your existing roof rack crossbars.


Features:

  • Universal platform mounts to your roof rack crossbars to let you carry cargo and accessories
  • Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets
    • Perfect for road trips, camping, and overlanding - a great fit for any outdoor lifestyle
  • Horizontal slats accommodate clamp-on accessories like bike racks, kayak carriers, or a roof top tent
  • Integrated channels accommodate various off-road accessories (sold separately)
    • Compatible with perimeter rails, off-road lights, jack holders, spare tire carriers, jerry can holders, and more
  • Built-in wind deflector reduces wind noise and drag
  • Rugged construction designed for off-road use and tested in the Australian Outback
    • Aluminum frame with black powder coat is durable and rustproof
  • Easy installation on roof rack crossbars with universal mounting hardware
  • Assembly required


Specs:

  • Application: round, square, aero, elliptical, and most factory crossbars
    • Also fits 2" round or square tubing
  • Quantity: 1 platform
  • Dimensions: 60" long x 54" wide x 4" tall
  • Required number of crossbars: 2
  • Weight: 57 lbs
  • Lifetime limited warranty


Yakima Off-Road Rating

This platform rack was tested to ensure that it is able to handle regular adventuring over rough terrain. Yakima extensively tested it with worst-case-scenario lab simulations and real world driving to make sure it exceeded ISO requirements. This rack is built to handle evasive maneuvers, swerving, speed bumps, emergency stops, and whatever else you encounter while off the beaten path.


Yakima LockNLoad Gear Mount Compatibility

Yakima LockNLoad Compatible Gear Mount Listing



Y05039 Crossbar Clamps for Yakima Lock N Load Roof Rack - Qty 4

Y05045 Yakima LockNLoad Heavy-Duty Roof Rack Platform - Size B - Aluminum - 60" Long x 54" Wide

Item # Y05045-39

Installation Details Y05045-39 Installation instructionsAlternate Instructions Y05045-39 Installation instructions


California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

48 reviews
Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima accessories. Mounts to your existing roof rack crossbars.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

SIMPLE & EASY!



by:

Great service! Jon was great. Thank you



by:

Quick quick service and delivery. Would definitely purchase from them again.



by:

Worked great


25
48
Show More Reviews

See what our Experts say about this Yakima Roof Rack

  • Quiet Roof Rack for 2024 Ford Bronco Sport Big Bend Edition
    Hey Chester! Have you tried the Yakima TimberLine Roof Rack with JetStream Crossbars # Y42GD yet? When it comes to noise reduction these are as good as it gets. There will always be some level of noise with the addition of a roof rack but these keep it to a minimum. If you want to add locks you will also need the Yakima Same Key System (SKS) Lock Cores # Y07204. The rack is pretty easy to install so if you still think it is too much you can always take it off when you don't need it. Another...
    view full answer...
  • Rhino-Rack Pioneer Roof Tray for 2019 Volkswagen Atlas
    The 84" Long x 56" Wide Rhino-Rack Pioneer Platform Roof Tray # RR75TB is a custom fit tray and while it won't fit your 2019 Volkswagen Atlas, there is another Pioneer Tray that will work. The 58" Long x 47" Wide Rhino-Rack Universal Pioneer Platform Rack # RR42115BF is designed for crossbars and comes with mounting hardware to fit the Thule roof rack on your Atlas. This is the largest Pioneer Tray that is compatible with your vehicle as there are no custom fit options. I have attached...
    view full answer...
  • Will Yakima TimberLine Towers And LockNLoad Platform Fit 2025 Honda Pilot Trailsport?
    Hello Kevin, thanks for reaching out. Yakima does confirm the Timberline towers to fit the factory raised rails on the 2025 Honda Pilot. Sadly, they do not offer a direct fit for the LockNLoad Platform so your best option would be to go with a roof rack with crossbars like the Yakima TimberLine Roof Rack for Raised Rails # Y42GD which comes with 60" black aero crossbars. Then use the clamp-on version of the LockNLoad, part # Y05045-39.
    view full answer...
  • Largest Platform Tray Fitment for a 2023 Toyota Sequoia with OEM Roof Rack
    The 76" Long x 54" Wide Rhino-Rack Pioneer Platform Roof Tray # RR65TB will be too long for the OEM roof rack on your 2023 Toyota Sequoia, but we have an alternative option through Yakima with their 60" Long x 54" Wide LockNLoad platform tray which includes the following kit: - Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 60" Long x 54" Wide # Y05045-39 This kit comes with the platform itself along with the clamp-style mounting hardware to secure the platform to your crossbars....
    view full answer...
  • Recommended Platform Rack and Crossbars for a 2022 Toyota Highlander
    To be able to mount the Yakima LockNLoad platform rack to your 2022 Toyota Highlander you're going to need to add a set of crossbars with the Yakima JetStream Crossbars # Y00425, and the SkyLine Towers for Yakima Crossbars # Y53TR, and the Landing Pad 28 for Yakima SkyLine And Control Towers # Y66VR. I know you mentioned you have OEM crossbars, but most of the time people get roof rails and crossbars mixed or they use them interchangeably when they are not the same. If you do actually...
    view full answer...
  • Correct Bolt and Nut for the Channels of a Yakima LockNLoad Platform Carrier
    I do have an option for you, but I contacted the manufacturer about whether the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers # Y8880184 will work with a Yakima LockNLoad platform like the # Y05045-39. They informed me that the LockNLoad's use M8 bolts and the Rack and Roll uses M10 bolts. Instead you can use the Replacement M8 T-Bolt # 853-0782 and either the Zinc Plated Hex Flange Nut - M8 # 185917 or the Replacement 3-Wing, High M8 Hand Knob # 753-0776 for a nut. Any...
    view full answer...
  • Recommended Bolts for the Channels of a Yakima LockNLoad Platform
    I checked with Yakima and the correct bolts for LockNLoad Platform Racks like item # Y05045-39 are M8 T-Bolts like item # 853-0782. The Replacement T-Bolt item # Y8880184 you were looking at are M10 bolts and wouldn't work. Any extra length of the Replacement M8 T-Bolt # 853-0782 can be cut off.
    view full answer...
  • Recommended Platform Rack for a Yakima RackNRoll Trailer
    You can use whatever platform rack will fit on the round crossbars on the Yakima Rack and Roll Trailer # Y08107, there isn't size maximum. I personally think the Yakima LockNLoad Platform Rack for Crossbars # Y05045-39 would be plenty big, measuring 60" x 54" x 4".
    view full answer...
  • Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4
    The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
    view full answer...
  • What Is The Dimensions Of The T-Track On The Yakima LockNLoad Platform Rack?
    I spoke with Yakima, and they informed me that the t-track on the Yakima LockNLoad Platform Rack for Crossbars # Y05045-39 measures 8mm (.31") high, and measures 11mm (.43") wide. Attached is a diagram of depicting these measurements for you to check out as well.
    view full answer...
    Image 1 for
  • Is The Factory Roof Rack On a 2021 Ford Bronco Sport Capable of Supporting a Rooftop Tent?
    Adding a Yakima LockNLoad Platform Rack for Crossbars # Y05045-39 to the factory crossbars on your 2021 Ford Bronco Sport is not going to increase the 150lb weight capacity. It will actually lower the amount of weight you can put on the roof by the weight of the rack(57lbs). Because of the very low weight rating for your roof I would recommend a Tent Trailer # Y08129-3727 since most these tents are going to weigh 100lbs or more. This will put the weight on a trailer and won't degrade...
    view full answer...
  • Platform Roof Rack For Yakima & Thule Accessories
    There is a platform you can use but the Inno is not compatible with the Yakima and Thule accessories you have. That's more of a platform to carry larger things that you tie down. What will work though is a platform from Yakima, the Yakima LockNLoad Platform Rack for Crossbars # Y05045-39. This will work so long as your items do have the ability to fit into the T-slots.
    view full answer...
  • Can I Attach The Inno Box 2020 Rooftop Cargo Box To A Yakima Lock N Load B Platform
    Yes, the Inno Box 2020 Rooftop Cargo Box - 14 cu ft - Matte Black, part # IN86FR, can attach to the Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 60" Long x 54" Wide, part # Y05045-39, with the addition of the Aero Crossbar T-Slot Mounting Hardware for Inno Cargo Boxes and Platforms - Qty 4, part # INBRP12. Unfortunately, none of the Yakima SkyBox models can attach to these platform. I have included product description links and video review links below.
    view full answer...
  • How Much Height Does Yakima LockNLoad Platform Rack for Crossbars # Y05045-39 Add
    The Yakima LockNLoad Platform Rack for Crossbars # Y05045-39 would add right at 4 inches to the height of your vehicle.
    view full answer...
  • What Size Yakima LockNLoad Platform Can I Put On My Trucks Camper Shell?
    You can use the Yakima LockNLoad Platform Rack On your A.R.E. HD MX Series Truck Cap. The mounting hardware wraps around your crossbars to secure it into place. If you have 2 crossbars on the roof, the largest platform you can put up there is 60" by 54" # Y05045-39. If you have 3 crossbars on top, you can use this larger platform # Y05048-39 which is 84" by 54". If you only have two, I think it would be best to get another crossbar and get the longer platform. Make your truck do more!
    view full answer...
  • Will Yakima 60x54 Lock/Load Platform Fit 60 inch Crossbar Spread
    According to Yakima the 60" Long x 54" Wide Yakima LockNLoad Platform Rack for Crossbars # Y05045-39 will be too short when it comes to mounting for crossbars that are 60" apart and you need to go with the larger 84" Long x 49" Wide version which is part # Y05047-39. The thing about this though is that the larger platform rack requires 3 crossbars to be safely used so you will need to add another crossbar to your A.R.E. HD CX Series Bed Cap. We have the Thule TracRac CapRac # TH29200XT...
    view full answer...
  • Can Yakima LockNLoad be Installed on 2021 Toyota 4Runner OEM Roof Rack
    Great question! The OEM roof rack on your 2021 Toyota 4Runner looks nice but it sits too low to your roof for the Yakima LockNLoad # Y05045-39 mounting hardware to fit. Instead of purchasing a roof rack AND the LockNLoad what I recommend doing is picking up the parts to mount the LockNLoad directly to the raised rails on your 4Runner: 60" Long x 54" Wide LockNLoad # Y05045 SL Adapter # Y05042-2 TimberLine Towers # Y33TR We don't have any brackets designed to fit with the ARB awnings...
    view full answer...
  • Can Roof Rack Accessories Designed for Crossbar Top Channels Fit Yakima LockNLoad
    The channels on top of the Yakima LockNLoad Platform Rack for Crossbars like the part # Y05045-39 are designed to accommodate roof rack accessories that were designed to attach to crossbar top channels. So basically any track nut designed for roof rack installed accessory top channels is goin to work like the # 853-2106 but you really will want to base it off what the accessory is and whether it was designed for top channel install.
    view full answer...
  • Does Yakima LockNLoad Platform Rack Need to be Put Together Right Out of the Box
    You will need to put the Yakima LockNLoad Platform Rack for Crossbars # Y05045-39 together out of the box. There are actually very few (if any) platform racks like this that come put together simply because it would increase the size of the shipping box. Attached is a review video for you to check out as well as a link to the installation instructions for you to reference so you can see what putting this together entails.
    view full answer...
  • Will Yakima MajorShady 270 Awning Fit with Rhino-Rack Sunseeker and Batwing Awning Mounting Bracket
    The Yakima MajorShady 270 Awning # Y82AV mounting channels are 4-1/2" apart while the Rhino-Rack Sunseeker and Batwing Awning Mounting Bracket # RR43259 has the furthest holes spaced out 4" apart so these aren't able to be used together. You can mount the MajorShady 270 on a roof rack via the T-Slots or to one of the Yakima LockNLoad platforms, like part # Y05045-39, though. Basically as long as the T-Slots fit standard accessories and are perpendicular to the direction of travel you'll...
    view full answer...
  • What Parts Are Needed To Make Low-Profile Bed Rack System For 2022 Ford F-150 w/ RetraxPro Cover
    Looks like you are pretty much there! The Landing pad 1 # Y00221, Skyline Towers # Y53TR, and 68" Yakima HD crossbars # Y01158 will all work perfectly with the RetraxPro XR rails on your 2022 Ford F-150. This would be perfect for carrying bike racks with a rack like # TH598004-FB, or a platform like the # Y05045-39 but it would be pretty hard to carry kayaks or canoes with this style of rack as you would have a ton of overhang past the bed which is less than ideal. For a kayak or canoe...
    view full answer...
  • Modifying Crossbar Clamps For Yakima LockNLoad Platform Rack To Fit 2" Crossbars
    Per the instructions for the Crossbar Clamps # Y05039 used on the Yakima LockNLoad Platform Rack # Y05045-39 you may need to remove the cushion on the U-Bolt section for to properly fit some 2" crossbars. I have linked these instructions below for you to see in step 2 on page 2. This should provide you with adequate threads for the included nyloc nuts to grab.
    view full answer...
  • Yakima LockNLoad Platform Compatibility With The Yakima OverHaul HD Adjustable Ladder Rack
    Yes, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 can have a Yakima LockNLoad Platform attached to it. This ladder rack has an on-road weight capacity of 500lbs so depending on the size of the Yakima LockNLoad Platform you choose you would just subtract its weight from the 500lbs to determine the remaining weight capacity available. Depending on the LockNLoad Platform kit you get it will have crossbar clamps # Y05039 included to attach the platform...
    view full answer...
  • Yakima LockNLoad Platform For Yakima OverHaul Ladder Rack With 60 Inch Crossbars
    There is a LockNLoad platform rack that I verified directly with Yakima does fit the 60 inch crossbars of the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack - 60" Crossbars # Y01151-57. The 62 inch width won't work though as it's just too wide and you can't leave off the crossbars; the platform does need to attach directly to them. So what you will need is the 60" x 54" LockNLoad, along with crossbar clamps, and you can get that all-in-one with the following part: - Yakima LockNLoad...
    view full answer...


< Previous
12




Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Aidan B
Video by:
Aidan B
Employee John S
Video by:
John S
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Colin H
Installed by:
Colin H
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Michael B
Updated by:
Michael B
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T
Employee Adam E
Test Fit:
Adam E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


<