bing tracking image
  1. Roof Rack
  2. Rhino Rack
  3. Aero Bars
  4. 33 Inch Bar Space
  5. Complete Roof Systems
  6. 2 Bars
Rhino-Rack Vortex StealthBar Roof Rack - Raised, Factory Side Rails - Aluminum - Black
Rhino Rack

Rhino-Rack Vortex StealthBar Roof Rack - Raised, Factory Side Rails - Aluminum - Black

Part Number: JA7970
In Stock
$442.90
Retail:$503.97
You Save: $61.07
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft. Great Prices for the best roof rack from Rhino Rack. Rhino-Rack Vortex StealthBar Roof Rack - Raised, Factory Side Rails - Aluminum - Black part number JA7970 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (48)
  • Q & A (0)
  • Photos

Rhino Rack Roof Rack - JA7970

  • Aero Bars
  • 33 Inch Bar Space
  • Complete Roof Systems
  • Rhino Rack
  • 2 Bars
  • Black
  • Flush

These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.


Features:

  • Quiet, low-profile roof rack lets you mount carriers and accessories on the roof of your vehicle with raised, factory side rails
  • Slim, elliptical crossbars create an extremely aerodynamic system
  • Flush design - bars sit between side rails to create an ultra-low-profile roof rack
    • Crossbars only raise roof rack profile 1-3/8" above factory side rails
  • Top channel lets you add channel-mounted carriers and accessories
    • Clamp-on accessories can also be mounted to bars
  • Rubberized Vortex strips in top channel dramatically reduces drag and wind noise
    • Keep dirt and grime out of crossbars
    • Provide cushioning and slip resistance for your cargo
  • Versatile bars have 3-15/16" of side to side adjustability
    • Lets you reposition bars to accommodate carriers and accessories that require different crossbar spreads
  • Arched design complements the curves and lines of your roof
  • Lightweight, structural-grade anodized aluminum bars are rustproof
    • Internal H-shaped extrusion provides exceptional bar strength
  • UV-treated, glass-reinforced nylon legs are weather resistant
  • Built-in locks secure crossbars to roof and secure channel-mounted carriers to crossbars
  • Simple, solid installation with rubber-coated stainless steel straps
    • Straps wrap completely around raised roof rails for maximum contact and security
  • Complete system includes 2 crossbars, 4 legs, and fit kit
  • Matte black finish


Specs:

  • Rack weight capacity: 176 lbs
    • Always observe your vehicle's maximum roof load capacity
  • Minimum crossbar spread: 27-9/16"
  • Crossbar dimensions:
    • Front: 33-1/4" long x 3-1/8" wide x 1-3/16" tall
    • Rear: 33-1/4" long x 3-1/8" wide x 1-3/16" tall
  • T-slot dimensions: 13/16" wide x 1/4" tall
  • T-slot top opening: 3/8"
  • Underbar slot: 11-3/4"
  • Limited lifetime warranty


rhino rack stealth bar

The low-profile, aerodynamic Rhino-Rack Vortex StealthBar roof rack lets you carry gear and accessories on your vehicle's roof quietly and with little wind drag. The crossbars mounts directly to your vehicle's raised, factory side rails. The Vortex StealthBars have built-in rubber strips that disrupt airflow for a quiet ride, and the bar is constructed of aluminum so it won't rust. These bars blend seamlessly with the support legs to provide a from-the-factory look, and they are custom cut to your specific vehicle. The legs also include built-in locks that protect your gear and the rack from theft.


Aerodynamic Design

aerodynamic

The rubberized Vortex strips in the crossbar's top channel disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex StealthBar cuts through the air with minimal drag - even at highway speeds.


The Vortex StealthBar roof rack has a flush-mount design so the crossbar terminates at the legs with no overhang. This provides the rack with a seamless, from-the-factory look, and it also helps to improve aerodynamics by reducing drag and wind noise.


Strong, Durable Construction

construction

The Vortex StealthBar is made of structural-grade anodized aluminum with an H-shaped internal extrusion. This extrusion strengthens the bar without adding significant amount of weight. And the aluminum bar wont rust so you can leave it on your roof year-round.


The rack's durable, glass-reinforced nylon legs are designed to stand up to cargo loads and weather extremes. They're also UV treated to withstand long-term exposure to sunlight.


Custom Fit for Easy Installation

stealth bar design

The roof rack arrives at your doorstep almost completely assembled. The crossbar is already mounted into the nylon legs, and the bar is pre-cut to match the width of your vehicle's roof. The few remaining assembly steps are straightforward and only require the strap and lock fit kit.


The fit kit includes co-molded, rubber-coated stainless steel straps designed to fit around your raised, factory side rails. To install, remove the leg covers and simply attach the straps to the bottom of each leg. Then wrap the straps around your vehicle's side rails. Lastly, secure the straps to the top of each leg and replace the cover.


Channel-Mounted and Clamp-On Accessories

c channel

Each crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersports carriers, and ski racks. The Vortex strips in the top channel come in 3 pieces, so theyre easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.


You can also attach most clamp-on accessories to the bars, and the Vortex strips provide a shock-absorbing, no-slip cushion for any accessories that rest on them.


Built-In Security

crossbar security

Locking covers on each support leg let you secure accessories mounted in the crossbar's top channel. These sturdy nylon covers give the rack a finished look and also secure the rack to your vehicle's roof. The cover locks are keyed a like, so a single key opens all locks.



RRRSB03B Rhino-Rack Vortex StealthBar Load Bar - Raised, Factory Side Rails - Aluminum - 33" Long - Black

RRRSK01 Short Strap Fit Kit with Locks for Rhino-Rack Vortex StealthBar - 8" Long - Qty 4

Installation Details JA7970 Installation instructionsAlternate Instructions JA7970 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Rhino-Rack Vortex StealthBar Roof Rack - Raised, Factory Side Rails - Aluminum - Black - JA7970

Average Customer Rating:  4.5 out of 5 stars   (48 Customer Reviews)

These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

by:
Subaru Outback Wagon

I bought this rack as a Christmas gift for my daughter's 2023 Subaru Outback Wilderness Wagon. It fit perfectly! It was relatively easy to install with the help of my son-in-law. It is very secure and holds her cargo box very well. After multiple highway trips between Maine, New Hampshire and Massachusetts it hasn't budged!



by:
2023 Subaru Outback Wagon

Great rack for my '23 Outback Wilderness. Lowest profile out there. When installing use fixture point 1 or 2 for the locking strap. If you use 2 it is tight and I had to remove the barrel, attach the strap, and then reattach the barrel. Point 1 is easier and still tightens all the way.



by:
Subaru Outback Wagon

It looks great. I have not heard any noise from these bars, so far while driving. The crossbars were installed on a 2022 Subaru Outback Wilderness. The Rhino-rack hardware kit RSK01 was shipped separately. It contains four CA1319 RSB Short Locking Straps. Hole #1 (i.e. the farthest hole) worked best for the installation.



by:

It’s missing parts, the locking mechanism, keys, and straps to install the bar on the rack….



by:
2022 Ram 3500



by:

Great low profile design. Better than what Chevrolet offers. Holds up great and handled the weight. Easy to install Make sure you have it spaced out to your desired liking otherwise is a little time consuming to move again but otherwise I would definitely buy again.



by:

When I ordered this product I was excited to see the reviews said how fast it shipped. I was not so lucky. The item was back ordered and the website did not indicate that. I received an email saying it would ship in a week so I thought it would arrive in a week. I was wrong. When I called about compatibility with attachments they told me it was back ordered and I wouldn't receive it until mid July. That whole ship in a week meant ship from the distributor to etrailer. Then it would ship to me.

Once it arrived we immediately opened it up and started assembling it. When we got to the part in the directions about attaching it to the car the directions said to go to Rhino-Racks website to find out what hole in the y-straps to use for my particular vehicle. Their website does not have an area with a fitment guide as the directions indicate so I had to call. I spoke with Jeff at Rhino-Rack and he said hole number 3. That was impossibly tight and the strap would not reach. I called back to see if hole 2 two would be acceptable and he said it should be hole 3. Well, we went with hole 2 because there was NO way hole 3 would reach the bolt since steel does not stretch.

Upon attaching the strap around the raised roof rails the strap slipped and I quickly found out the steel loop is as sharp as a kitchen knife as it sliced the tip of my finger. It was cut so deeply and cleanly it took over an hour to stop the bleeding. I called Jeff back to let him know about this problem. Aside from thanking me for letting him know, he did nothing to better the situation. I will say, now that my finger isn't gushing blood and the cross bars are securely attached to my 2015 Hyundai Tucson in hole number 2 on all four of the y-straps, I am pleased with the appearance and how quiet they are when driving.

Some cons, aside from the aforementioned:
-The rubber strip caved in when I strapped one kayak just to the cross bars. I will need to order a new one to prevent water from getting inside and to prevent noise. It is very disappointing when you have something for less than a week and you need to replace parts on it.
-The locks are super cheap and it wouldn't take much for someone to break them if they really wanted my cross bars.
-The options for attachments are very limited. In fact, I almost sent these back because I was having a hard time finding kayak attachments that I liked.

I wouldn't order these again knowing the hassle I've gone through with them.



by:

Appears to be a well made product. I wanted a low profile rail. I would have preferred a clamp style cross bar, like the Yakiima Whispbar, but they were to wide for my Thule Evolution (ski box), mounting brackets.
You need to be careful when attaching the straps when attaching to the bracket and mounting to the rail. The exposed metal portion is very sharp.
The only con is see to this product is the strap mounting system, its more of a hassle to adjust.



by:

Rack looks sturdy. For my 2017 vw Alltrack the rear bar could be replaced for a shorter. On my side picture that is as far back the bar will go (item ja7975). Which it worked out for this application if you want the bar further aft a shorter bar will be needed. The front fit well within it’s range. The car tapers towards the back so back bar is shorter. I also dont like how VW put a notch on the bottom rail. It looks like the straps will be easy to cut with a bolt cutter.



by:

Product fit well, easy to install. I received a new Ford Expedition at work with an aluminum roof. I have an emergency light with magnetic mounts that will not work on the aluminum roof. Purchased these bars and used them to mount the light without having to put holes in the roof.



by:

These racks did not noticeably increase the wind noise of my car. They look great, complimenting the appearance of my Jeep, and they were quick and easy to install.



by:

2021 Subaru Crosstrek,
Website video
for installation was easy to follow, installed to spec, might have to adjust span when I get my roof basket. Cross bar seems solid, and was what
I wanted, a little better than OEM. Look great



by:

Great product, and great service. It not only works well for our thule top box, but looks good on the flex too. I would recommend this to anyone looking for a dependable set of rails.



by:

I researched low profile bars for 3-4 hours before buying these Stealth Bars. A major reason I went with these is the metal strap inside the rubber band that attaches to your side rails. Other companies just used hard rubber that could easily be slashed with a box cutter.

Of course these lock, which is important. They were also easy to install. I installed one and my wife installed the other.

Thanks etrailer and Rhino Rack.



by:

First of all, this review is on the actual product not etrailer. They were awesome as always on this purchase (more on that later). Sorry for the long review, but I feel the need….

2014 Jetta Sportwagen

These are not silent. At ~45 mph and less there is a high pitched whistle. At lower highway speeds there is a low level hum, like a monk chant. After that just regular wind/turbulence noise.

On to the install… etrailer website confirmed fitment. In the instructions (step 8) there is a need to go to the manufactures website to find a vehicle specific info. My vehicle came back as not supported. So called etrailer and as always, awesome. Took her a bit – I offered to end call while she searched – but she did send me a supplemental sheet and even had taken the time to read them and suggests the proper fitment. Kudos to Cathryn B.

Step 1 and 2 are misleading in a way. Step 3 should be step 1. Step 2 shows just the bar with no ends, which is never needed during the install and you would have had to complete steps 4&5 to get to that point.

In step 1, inserting the rubber fully is not going to happen with just your hand. I used a chopstick to push the nipple fully into the hole. Could use the (provided) allen wrench but that could tear the rubber.

There are two different crossbar lengths provided and the install location is not specified until step 10. Kinda should be mentioned up front as the install location is specific due to this.….

Step 4/5 – even after loosening the bolt it still had a catch when adjusting length. I thought it was at the end of the road but when it was still too short while attempting to connect to my rails I looked over and saw that I had another inch or so, took a bit of muscle to get past that position.

Step 6 – the crossbars on one had apparently fallen out during shipping – took a few minutes to hunt down in the box/packing material.

***Step 11 – HEED THE WARNING. I’VE GOT OLD MAN LEATHER FINGERS AND STILL WAS BLEEDING LIKE A STUCK PIG. I WOULD RECOMMEND PUTTING BANDAIDS ON YOUR INDEX FINDER PRIOR TO THIS STEP. Also make sure you have the t-bolt just barely on the threads as it will give you maximum slack to complete te step, hopefully without causing injury.

Step 13 – please define ‘overtighten’. Lots of room for interpretation there.

Step 15 - I would truly like to see a video of someone successfully completing this step. If all other factors of the install are done correctly, I don’t feel this is needed anyway so I gave up after about five minutes.

Final, and biggest issue, is the sunroof. I don’t use it often so not sure if this will cause me to return the product, but a ‘guaranteed fitment’ means this should not be an issue.

First issue is that it rubs when the sunroof is open. Second is apparently my sunroof has a sensor that keeps it from closing if it sense too much pressure. Third is to compensate for this I had to move from my preferred rearward location to all the way forward. It rubs in both positions however at the forward location the sensor (so far) has not picked up on it despite having a longer time / area rubbing when opening and closing. I did push down on the crossbar as much as I could (and I’m semi fat) to simulate a load and still opens / closes. Now, because of the forward location I have a nice wide black bar blocking the center of my sunroof.



by:

The stealth bars are sturdy and low noise. But they are so close to the roof of my 2016 Escort that the knobs for attaching the J-hook kayak carrier rub the roof. I put a eighth inch hard rubber pad between the rails and the crossbars and removed some of the unthreaded portion of the knobs to make them fit to my satisfaction.



by:

I had one problem with my order: one of the cross bars was missing the rubber vortex strips. If you could have someone send these out it would be greatly appreciated.
Other than that, I'm very satisfied with the product.



by:

Very well-made and easy to install. As-advertised, these are compatible with a 2021 Subaru Crosstrek. They don't interfere with the operation of the sunroof - this had been a concern but there are no issues at all. They are low-profile and look good on the car. We'll use these to transport a paddleboard and kayak.



by:

Great job etrailer!!!! I received a phone call from etrailer about my credit card. Once all was cleared, I received my crossbars in 2 days. I was surprised how quickly I received them.. Installing the crossbars was pretty simple. The first one always takes a little longer; reading the instructions; going slow, making sure I am doing everything right. The second bar took half the time, if that much. The outside noise that other customers complain about, is none existant unless I am traveling over 70mph.Definitely recommend the product.



by:

All around excellent experience—5 stars out of 4! Excellent communication of order status and I am pleased with the quality of this product. I will continue purchasing for various needs with etrailer.com!!



by:

I got these for my '22 BMW X7. There are really tight on the factory rails to remove/install. Quality of the bars is solid. They do clear the sunroof.



by:

Looks like good quality product. The only problem was I didn't know what hole to use on locking strap, called Rhinorack.com headquarters. They quickly got info I needed for my vehicle. Wish there was an insert with that info.



by:

Thrilled I got quick delivery with standard shipping! The product arrived in good care and took maybe 40 minutes to install. Looks great and is sturdy



by:

Excellent service! Definitely will do it again
Thank you etrailer for great communication and fast delivery!



by:

Works well on a 2021 Mini Countryman JCW


25
47
Show More Reviews

See what our Experts say about this Rhino Rack Roof Rack

  • Lowest Profile Roof Rack that Fits 2023 Subaru Outback Wilderness
    The lowest profile roof rack that fits the raised rails of your 2023 Subaru Outback Wilderness would be the Rhino Rack Vortex Stealthbar Roof Rack part # JA7970 which is a flush bar design that does not have the bars extend through the feet of the rack. This option also comes with locks. This would carry the Yakima OffGrid Roof Cargo Basket part # Y07138 the lowest.
    view full answer...
  • Lowest Profile Roof Rack that Fits 2022 Outback Wilderness
    The lowest profile roof rack that fits your 2022 Subaru Outback Wagon is the Rhino Rack Stealthbar roof rack part # JA7970 which will only add right at 1-3/8 inches.
    view full answer...
  • Does the Rhino-Rack StealthBar # JA7970 Fit My 2022 Subaru Outback Wilderness?
    Yes! I confirmed with Rhino-Rack that the Rhino-Rack Vortex StealthBar # JA7970 fits your 2022 Wilderness model of 2022 Subaru Outback. If you are curious about the weight capacity, the bars have a maximum load rating of 209 pounds (on-road) and 139 pounds (off-road).
    view full answer...
  • Lowest Height Roof Rack Crossbars For a 2024 Subaru Outback Wagon With Raised Roof Rails
    The Rhino-Rack Vortex StealthBar Roof Rack # JA7970 is going to be the roof rack with the lowest height for your 2024 Subaru Outback. The unique design of the crossbars mean they place the crossbar only 1-3/8" above the factory raised rails on your Outback.
    view full answer...
  • Flush Style Roof Rack For 2022 Subaru Outback Wilderness
    There is indeed one option for a flush-design roof rack that fits your 2022 Subaru Outback Wilderness, which is from Rhino-Rack, and I went ahead and verified this fit for you with the manufacturer. The correct part number is the following: - Rhino-Rack Vortex StealthBar Roof Rack # JA7970 The StealthBar # JA7970 mounts directly to your Outback's raised side rails, and has the flush design you want along with being low profile (sitting just 1-3/8" above your side rails), giving it a really...
    view full answer...
  • 2022 Subaru Outback Wagon Low Profile Roof Rack Recommendation for Raised Rails
    The Rhino-Rack and Thule roof racks will add the following height to the raised rails on your 2022 Subaru Outback Wagon Wilderness: Rhino-Rack Vortex - 2-3/16" 59" Vortex Aero Crossbars - Black # RRVA150B-2 SX Series Legs - # RRSX100 Thule WingBars - 3-1/8" 50" WingBars - Black # TH711320 Evo Raised Rail Feet - # TH710401 For something that sits even lower I recommend the Rhino-Rack Vortex StealthBar # JA7970. The bottom of this crossbar is about the same height as your raised rails...
    view full answer...
  • Sleek Roof Rack For a 2023 Subaru Outback Wagon Wilderness With Raised Rails
    The best sleek roof rack option that we have for your 2023 Subaru Outback Wagon Wilderness is the Rhino-Rack Vortex StealthBar Roof Rack # JA7970. This rack has an ultra-low profile and aerodynamic design. It does not require a fit kit and legs, it will install using the rubber-coated stainless steel straps which provides for less parts needed. Using the Rhino-Rack Vortex StealthBar Roof Rack # JA7970 will allow you to use both channel and clamp mounted accessories on your Outback Wagon...
    view full answer...
  • Low Profile Roof Rack Fit For 2023 Subaru Outback Wilderness
    There is indeed a low-profile roof rack that I verified will fit your 2023 Subaru Outback Wilderness, from Rhino-Rack. The correct fit for your Subaru is the following: - Rhino-Rack Vortex StealthBar Roof Rack # JA7970 The # JA7970 is the lowest-profile rack that fits your Outback Wilderness, as they are flush-mount, so they only go the width of the side rails on top of your Subaru. This Rhino-Rack roof rack fits, but it's also my personal favorite roof rack. The reason for that is...
    view full answer...
  • Comparing Rhino-Rack, Thule and Yakima Low Profile Cross Bars For a 2023 Subaru Outback Wilderness
    The Rhino-Rack Vortex StealthBar Roof Rack # JA7970 actually has rubber coated stainless steel straps which secure it to the raised rails on your 2023 Subaru Outback Wilderness. So you won't have issues with the straps failing. If you are only using your rack for a roof basket the Rhino-Rack is a great option. I do prefer using the Thule Rack # TH96FE, # TH69SC if you are constantly changing your roof mounted accessories. With the Thule having the 2-piece channel seal you will not have...
    view full answer...
  • Roof Rack and Surfboard Carrier Recommendation for 2020 Toyota 4Runner
    I really like Rhino Rack's roof rack products. They might not have the name recognition that Thule or Yakima have but they make a high quality product at a decent price. Why spend more if you don't have to? I'd recommend the finished look of the Rhino Rack Vortex StealthBar roof rack, part # JA7970 for black or # JA7951 for silver.These bars have a clean, OEM look. For a surf/paddleboard carrier, I'd recommend the # INXA445 from Inno. This system will allow you to carry 2 long surfboards...
    view full answer...
  • How to Find Distance from 2022 Toyota 4Runner Roof to Underside of Rhino-Rack StealthBar
    From what I'm finding it looks like your 2022 Toyota 4Runner comes with the factory raised rails so you need to go with the Rhino-Rack Vortex StealthBar Roof Rack # JA7970 since the ROC25 Roof Rack is for a naked roof. The bottom of the crossbar on the StealthBar system will sit about the same height as the top of your raised rails. I'm not sure what those clearance measurements are but you can use a yard stick or something similar to take measurements anywhere along your roof. If you...
    view full answer...
  • Recommended Crossbars for a 2024 Subaru Outback Wilderness
    Yes, you can! The Rhino-Rack Vortex StealthBar Roof Rack item # JA7970 attaches directly to the raised rails on the roof of your 2024 Subaru Outback Wilderness. The crossbars attach with rubber-coated stainless steel straps. This roof rack set up has a 176 lbs capacity.
    view full answer...
  • 2022 Mercedes-Benz GLB Sunroof Fitment with Aftermarket Roof Rack
    The bottom of the Rhino-Rack Vortex StealthBar Roof Rack # JA7970 is going to be at least at the same height as the bottom of the OEM raised rails on your 2022 Mercedes-Benz GLB so if your sunroof is lower than that you'll be good to go. Most roof rack manufacturers don't recommend opening up the sunroof with a roof rack installed though because it creates a different wind pattern which can lead to some wind noise that you otherwise wouldn't have. You'll also need to make sure that any...
    view full answer...
  • Will The Thule Compass Fit On 2023 Toyota 4Runner OEM Crossbars
    The Thule Compass Kayak Roof Rack w/ Tie-Downs # TH890000 will fit crossbars up to 3-1/4" wide and 1-2" tall so your factory crossbars will likely be well within these requirements. They would also work on the Rhino-Rack Vortex StealthBar Roof Rack # JA7970 as well.
    view full answer...
  • Does the Malone FoldAway-5 Kayak Carrier MAL38FR Fit the 2016 Toyota 4Runner's Factory Crossbars?
    It should. I don't have the specs on your 2016 Toyota 4Runner's factory crossbars but the Malone FoldAway-5 item # MAL38FR is designed to fit factory bars. You will just need to take a quick measurement of your roof rack to confirm. So long as the crossbars are no larger then 3-1/2" x 1-1/2" tall and can be spread out a minimum of 24" then the Malone item # MAL38FR will work. If your roof rack ends up not being compatible you can install the Rhino-Rack Vortex StealthBar Roof Rack item...
    view full answer...
  • Do Thule Edge Feet Fit AeroBlade Edge Crossbars on 2022 Toyota 4Runner
    Hey there Christian, so unfortunately the answer is no, the AeroBlade Edge crossbars do not fit the Edge Raised Rail Feet for Thule Edge Crossbars # TH69SC. Thule did not make the older AeroBlade cross-compatible with their latest WingBar feet (and vice-versa), which I know is disappointing - I certainly wouldn't want to have to get an all-new set up if I could just use my old parts. And as for your other question the # TH69SC is not the same as the older foot for the AeroBlade Edge. So...
    view full answer...

Do you have a question about this Roof Rack?


Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Carrie F
Updated by:
Carrie F
Employee Chris R
Video Edited:
Chris R
Employee Daron K
Written by:
Daron K
Employee Zach D
Video by:
Zach D
Employee John S
Video by:
John S
Employee Matthew G
Video by:
Matthew G
Employee Ed W
Test Fit:
Ed W
Employee Aidan B
Test Fit:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.