Do Thule Edge Feet Fit AeroBlade Edge Crossbars on 2022 Toyota 4Runner

Question

Question:

Hi there, I have a 7503 aeroblade edge fixed/flush system size large. Will this new raised mount foot TH69SC work with my old crossbars from the 7503 aeroblade flush large system? I understand the absolute bar length may be different per Thule. I am looking to use my old large 7503 crossbars with this foot TH69SC on my 2022 Toyota 4Runner. And second question, is this newer raised mount foot TH69SC the same part as the older foot that came with the integrated Thule AeroBlade Edge 7503 raised rail? Thanks!

asked by: Christian

0

Expert Reply:

Hey there Christian, so unfortunately the answer is no, the AeroBlade Edge crossbars do not fit the Edge Raised Rail Feet for Thule Edge Crossbars # TH69SC.

Thule did not make the older AeroBlade cross-compatible with their latest WingBar feet (and vice-versa), which I know is disappointing - I certainly wouldn't want to have to get an all-new set up if I could just use my old parts. And as for your other question the # TH69SC is not the same as the older foot for the AeroBlade Edge. So if you did want a new Thule flush rack for your 2022 Toyota 4Runner you would need the following:

- Thule WingBar Edge Crossbar - Silver # TH93RE or Black # TH96FE

- Edge Raised Rail Feet for Thule Edge Crossbars # TH69SC

Alternatively, I did want to mention there is another, less expensive option for a flush roof rack that fits your '22 4Runner to consider, the Rhino-Rack Vortex StealthBar Roof Rack # JA7970.

expert reply by: Kyle S

0

Answer 1

Hey Vicki! I'm not sure why roof racks are missing in the fitguide for the 2024, but they are the same as what you see for the 2025 Land Cruiser. Sticking with Thule, there are only the two crossbar options. They have the WingBar Evo and then the…

view full answer...

Answer 2

The style of roof rack you are looking for is referred to as a "flush bar" rack which means the bars of the rack do not extend out past the feet of it. The flush bar style of rack that fits your 2019 Subaru Outback Touring with flush rails…

view full answer...

Answer 3

The part number you mentioned is the Subaru/Thule Aeroblade crossbar so for a replacement rubber strip you would need the part #TH69JH.

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Adam, the correct Kuat DEK Platform rack with light bar for your 2026 Toyota Tacoma would be the part #KU73SR. The correct Kuat Ibex Overland Truck Cap then too would be the part #KU99SR that you referenced. Now the top of this would be lower…

view full answer...

Do Thule Edge Feet Fit AeroBlade Edge Crossbars on 2022 Toyota 4Runner

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching