Rhino-Rack Heavy Duty Roof Rack for Raised Rails - Aluminum - Silver - Qty 2

See what our Experts say about this Rhino Rack Roof Rack

• Higher Weight Capacity Ladder Rack that Fits 2019 Ford F-250
  Since your plan is to install the Retrax PowerTrax Pro XR # RTT-80384 if you have a long bed or # RTT-80383 for if you have a short bed all you'd need to install a Yakima OverHaul HD part # Y01151-58 ladder rack which has a 500 lb capacity would be the adapter # Y01155 and that would be covered. Now if you do need more weight capacity the TracRac sliding ladder racks like the # TH43003XT-785 for short bed or # TH43003XT-000 for a long bed and these do have a weight capacity of 1,250 lbs....
  view full answer...
• Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
  You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
  view full answer...
  
• Comparison of Rhino-Rack Heavy-Duty and Rhino-Rack Vortex Aero Roof Racks
  The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets # RRRCB-RSHB-RJHB as an example. That's the purpose of the name, and the advantage of the rack. This rack is made up of the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars: # RB1375 Qty 2 Rhino-Rack Quick Mount Legs: # RRRLT600 Qty 4 Roof Rack Leg Spacer Blocks: # RRQMHD05-2 Qty...
  view full answer...
• Roof Rack Recommendation for 2019 Hyundai Elantra and iKamper
  For a 2019 Hyundai Elantra with a naked roof, I suggest the Thule SquareBar Evo Crossbars, 53" Long, # TH712400. These will mount to a GT model with or without a glass roof using using the Evo clamp feet, # TH710501 and the fit kit, # TH145112. Or, if you have a sedan, use the Evo clamp feet, # TH710501 and the fit kit, # TH145069. These crossbars have a weight capacity of 220 lbs. The weight a roof rack can support is also limited by the roof capacity for the vehicle, this is outlined...
  view full answer...
• Carrying Plywood Sheets on a 2011 Subaru Forester
  I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
  The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Would Two Sets of Rhino Rack Heavy Duty Bars Double Roof Rack Capacity
  You would be doubling the weight capacity of the roof rack components of the setup but most likely you'd be limited by the roof capacity as the HD Rhino Rack roof rack components do have a capacity of 220 lbs. You'd need a set of tracks like the part # RTC16, four sets of the feet part # RLT500, and two sets of the 65 inch Rhino Rack bars part # RB1650B-2.
  view full answer...
• Roof Rack / Crossbar Options For 2020 Ford Escape With Or Without Existing Rails
  I have a solution for you, however, my contact at Rhino-Rack confirmed that the Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1375 is not compatible with your 2020 Ford Escape. It looks like you have a naked/bare roof, in which case you will want to use Rhino-Rack # RR86TB. This kit comes with everything necessary for installation and is going to be your best option for your vehicle with the naked roof and no factory rails of any kind. This setup has a weight capacity of 165lbs and comes...
  view full answer...
• Roof Rack Recommendation For 2005 Scion xB
  I understand how it can be a bit confusing so I will do what I can to help out. We do offer several different roof racks that are designed to fit your 2005 Scion xB. The main differences you will find are due to the design of the crossbars. Square crossbars can be quite a lot noisier than some of the more aerodynamic crossbars we offer. For a nice roof rack for your vehicle, I recommend the Rhino-Rack RS 2500 Roof Rack for Naked Roofs, part # RRRS434B. This system has aerodynamic aluminum...
  view full answer...
• 2017 Hyundai Santa Fe Sport with Panoramic Sunroof and Flush Rails
  Rhino Rack does offer roof racks that fit the low profile flush rails you have on the roof of your 2017 Hyundai Santa Fe Sport with the part numbers # RRVA137B-2 and # RRSX032 but the HD bar kit you mentioned would only fit the versions of your vehicle without the flush rails. This is an aero bar style rack too which means you'd have minimal wind noise as well as better fuel mileage. The sunroof you have won't be an issue for sure when it's closed, but Rhino Rack recommends checking for...
  view full answer...
• Roof Rack, Canoe Carrier and Bike Carrier for 2007 Ford Edge w/ Panoramic Roof
  The Rhino Rack Heavy Duty Crossbar Roof Rack, which consists of the # RB1375 crossbars, the # RRRLKHD roof rack legs and the # DK228 clamp kit would be a fit for a 2007 Ford Edge. You'll want to be careful about opening the sunroof with the roof rack in place. The rack or accessories mounted on it might interfere with the operation of the sunroof. Although the crossbars themselves have a 140 lb weight capacity, you might be limited by the roof capacity of the vehicle if it's capacity...
  view full answer...
• Roof Rack Recommendation for a 2007 Chevy Avalanche for Transporting Ladder
  For your 2004 Chevy Avalanche the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 has been confirmed as a fit and would work well. Your sunroof wouldn't be an issue either. I would recommend keeping it closed since it will be very loud transporting a ladder up there from the wind noise. However, I have a better solution for you in terms of a roof rack for securing a ladder. Instead I would recommend the Rhino Rack HD bar roof rack part numbers # RB1375, # RRRLKHD,...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2011 GMC Sierra 3500 Crew Cab with Naked Roof
  For your 2011 GMC Sierra 3500 Crew Cab with a naked roof, the Rhino-Rack Heavy-Duty Roof Rack referenced in your question is indeed confirmed to fit the roof of your truck. This system consists of # RB1375 for the two 54 inch Heavy-Duty Crossbars, # RRRLKHD for the 2500 Series Legs, and # DK227 for the Custom DK Fit Kit. This system will provide you with extremely durable aluminum crossbars with built-in C-channels for mounting Rhino-Rack, contractor-grade accessories. The bars themselves...
  view full answer...
• Can Low Rider Towers Fit on Truck Cap Tracks for 2007 Chevrolet Silverado
  Yakima's discontinued Low Rider towers hooked onto raised side rails and then clamped onto crossbars. If you already have these towers, they do not fit the Yakima 60" Tracks for Roof Racks # Y01135 as these are horizontal track systems and not raised side rails. If you're looking for tracks for your truck, I can recommend the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long # RTC18 along with Track Mount RLTP Legs # RLTP and Rhino-Rack Heavy-Duty Roof Rack Crossbars -...
  view full answer...
• What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
  According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
  view full answer...
• Rhino Rack Roof Rack Fit for 2013 Ford Escape
  To install the Rhino Rack Heavy Duty Crossbars on your 2013 Ford Escape you will want to use crossbars # RB1375, leg kit # RRRLKHD, and custom clamps and pads # DK375. If you are interested in the Rhino Rack Aero Crossbars, use # RRVA137B-2, # RRRLKVA, and # DK375. I have attached an installation video of the Rhino Rack aero crossbars on a 2013 Ford Escape for you.
  view full answer...
• Recommended Roof Rack For A 2012 GMC Sierra W/ Extended Cab On A Naked Roof
  I do have a roof rack option that will fit your 2012 GMC Sierra Extended Cab. Unfortunately, it will not be a Thule Rack because the fit kit has been discontinued. I do have a Rhino-Rack alternative that has a maximum weight capacity of 130 lbs with their heavy duty crossbar. This rack will consist of the following items: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 54" Long - Qty 2, part # RB1375 Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting...
  view full answer...
• Roof Rack Mounted Fork Mount Bike Rack Recommendations for a 2016 Toyota Highlander
  A popular roof rack mounted bike rack, fork mount, that is very stable is the Rhino-Rack MountainTrail # RBC035. This carrier is also compatible with disc brakes, accommodates bike wheels up to 3" in diameter, and uses a 9mm skewer. I have linked a video review of this carrier for you. If your bike has a through-axle then I recommend the Yakima HighSpeed, # Y02115. It is designed to hold a bike with a 12-mm, 15-mm, or 20-mm thru-axle fork without an adapter. I have linked a video review...
  view full answer...
• Does the Rhino-Rack HD Crossbars # RB1375 Fit a 2021 Nissan Sentra?
  I have a great alternative for you. Unfortunately, the Rhino-Rack Heavy Duty Crossbars # RB1375 will not fit your 2021 Nissan Sentra. For heavy-duty bars that are confirmed to fit your 2021 Nissan Sentra with a bare roof, I recommend the following parts: - Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03541 -...
  view full answer...
• Will Rhino Rack HD Roof Rack Fit 2012 Honda CR-V with Moon Roof
  The Rhino Rack HD Roof Rack part numbers # RB1375, # RRRLKHD, and # DK284 is a confirmed fit for your 2012 Honda CR-V. It will fit your vehicle with the moonroof, but if your moonroof angles up when opening it could potentially interfere with the bars. You should note that crossbars typically add quite a bit of wind noise. You won't end up wanting to have the moonroof open with the bars installed as it will be quite noisy.
  view full answer...
• Roof Rack Recommendation for a 2015 Hyundai Santa Fe Sport with Naked Roof
  The factory side rails on vehicles usually can't be installed on models that did not originally come with them but that would be a question best handled by a Hyundai dealer who will then probably steer you towards an aftermarket roof rack. So we can cut out the middle man and go right to an aftermarket roof rack. The addition of the clamps on a roof rack does not add any extra wind noise compare to models that don't have a clamp style roof rack. In fact, it is entirely possible, even likely,...
  view full answer...
• Recommended Roof Rack For 2012 Silverado LTZ 4-Door To Carry Small Aluminum Boat
  We do have roof racks that will work great on your 2012 Silverado. I recommend the Rhino-Rack heavy-duty roof rack. This roof rack has a 130-lb weight capacity. To order this roof rack you need part # RB1375, part # RRRLKHD, and part # DK227. I recommend securing the boat to the crossbars and to the vehicle for added security. For bow and stern tie-downs you may want to check out part # SR0704.
  view full answer...
• Foot Kit for Rhino Rack HD Bar to Fit Raised Rails of 2025 Subaru Crosstrek
  Hey Jeff, the correct leg kit for raised roof rails for Rhino Rack HD crossbars is the part # CXB. This would be the correct kit to use for your 2025 Subaru Crosstrek. How long of crossbars do you have?
  view full answer...
• Dimensions of Rhino-Rack Heavy-Duty Roof Rack Crossbars
  The Rhino-Rack Heavy-Duty 50-Inch Roof Rack Crossbar # RB1250S has cross-section dimensions of 1-7/8-inches tall and 1-5/8-inches wide, as shown in the photo I prepared for you. We also offer two bars as a set # RB1250. The vehicle known as the Mitsubishi Pajero in other countries is called the Montero in the North American market. If you happen to have a 2006 model year with factory installed roof rails that run front-to-back this crossbar can be installed using leg kit part # CXB.
  view full answer...
  
• Roof Weight Capacity of 2005 Toyota Highlander Fitted with Rhino-Rack Heavy Duty Roof Rack
  The Rhino-Rack Heavy Duty Roof Rack for your 2005 Toyota Highlander, which consists of parts # RB1250B-2 and # CXB, does carry a 200-lb weight rating. Your vehicle itself will also have a roof weight capacity that could be more, the same or less. Your manual's indicated weight limit of 100-lbs could be for an OEM roof rack, or it could be for the overall roof structure itself. If Toyota says the roof itself can handle 100-lbs and no more, then you will have to abide by that lower rating....
  view full answer...
• Can I Use The Batwing Awning # RR33200 With My Factory Crossbars?
  The Rhino Rack Batwing Awning # RR33200 is a bolt on installation so it won't be able to work with your factory crossbars. You'll need to add another roof rack system with tracks to be able to use the batwing awning. You can use something like these legs # CXB and these bars # RB1250. These have a channel which will work with the hardware on the Batwing. You will need this mounting kit # RR31102. I personally have not used the XTM 270 Batwing Awning before. So I think that the batwing...
  view full answer...
• How to Determine if Rhino-Rack CXB Leg Kit Fits a 2022 Subaru Forester for HD Bars & Roof Top Tent
  The Rhino-Rack CXB Leg Kit for Raised, Factory Roof Rack Side Rails # CXB will fit the factory rails on your 2022 Subaru Forester as long as those rails are not more than 1-1/2" tall and not more than 2-1/4" wide. This would allow you to use Rhino Rack HD cross bars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250. It is also important to note that since these use the Rhino Rack HD bars, you may have a difficult time finding a rooftop tent that fits. That is because the HD bars...
  view full answer...
• Replacement Security Key/Wrench for Rhino-Rack CXB Legs
  It sounds like you are looking for either the standard length replacement Rhino-Rack security key, # SECKEY-S, or the long version, # SECKEY-L. Either one will work despite the difference in handle color.
  view full answer...
• 2013 Pathfinder Naked Roof Roof Rack Recommendation
  For your 2013 Nissan Pathfinder the Sportrack Semi-Custom roof rack part # SR1002 has not been confirmed to fit your vehicle, BUT I do have a similar roof rack that would work for you. Instead you would want the Rhino Rack roof rack that consists of part numbers # RB1375B-2 and # CXB if you are looking for the most economical roof rack option around.
  view full answer...
• Rhino Rack Roof Rack Recommendation for a 1996 Nissan Pathfinder with Raised Rails
  There are two different styles of Rhino Racks that are offered for your 1996 Nissan Pathfinder with raised siderails. Either the aero style bars or the HD style bars. The pros to the aero style is that they will offer less wind noise and better fuel mileage, the pros to the HD is the higher capacity that they offer. About 25 lbs increased capacity. For the aero style bars you would want part numbers # RRVA126B-2 and # RRSX006. For the HD style you would want the # RB1120B-2, and # CXB....
  view full answer...
• Roof Rack Fit For 2011 Volkswagen Golf Wagon With Raised Side Rails
  We do have a roof rack solution for you, though I checked with Rhino-Rack about the compatibility of Leg Kit # CXB on your 2011 VW Golf Wagon with raised side rails, and this leg kit is not going to fit your vehicle. There is not a kit that is going to allow you to use the HD bars on your '11 VW Golf wagon, but you can get a brand new rack system for what it would cost to mount your current bars. Instead, I recommend checking out the Malone AirFlow2 Roof Rack # MPG215. The Malone is...
  view full answer...

Do you have a question about this Roof Rack?