Custom Fit Roof Rack Kit With Y00233 | Y00426 | Y53TR
Item # Y27KB
Our Price: $688.80
Confirmed to Fit
2014 Mazda CX-5
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (158)
- Q & A (0)
- Videos (6)
- Photos
Yakima Roof Rack - Y27KB
- Aero Bars
- Crossbars
- 60 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 60" JetStream MD - Black:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Landing Pad 11 (Set of 2):
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with fixed factory install points
- Attach to factory fixed points with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000233 Landing Pad 11 for Yakima Control Towers
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Custom Fit Roof Rack Kit With Y00233 | Y00426 | Y53TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Roof Rack Review - 2013 Mazda CX-5
Today on our 2013 Mazda CX-5, we're going to be test fitting the Yakima CoreBar Roof Rack System consisting of part numbers y00421. These are the Yakima CoreBar cross bars, 50 inches long, part number y00148. These are the SkyLine Towers for the Yakima cross bars for fixed mounting points, part number y00233. These are the landing pads which the SkyLine Towers will sit on. Now we already have the front one installed. The bars themselves have a nice aerodynamic shape to them and that's going to cut down wind noise and drag while you're driving.
They're constructed of steel and they have a carrying capacity with the other bar of 220 pounds. That packs a little bit of extra weight that you can put on top of your car. Although you want to double check to make sure your car can withstand that weight. Let's go ahead and show you how the rear one goes on. We'll start with the landing pads first, which these 2 pieces here are the landing pad. You open up the cover here and we'll start our rubber pad on the bottom, which just snaps in to place.
Once that's together, we'll take our bolt, our washer, and plastic washer, put them through the top and install it onto our fixed mounting point on our Mazda. Okay. You'll see the fixed mounting point towards the rear here. We'll kind of line it up, and then we'll get our Allen tool and tighten it down. Once you take the roof rack and CoreBars off, you can take this piece here, pop it into place, and you can leave these on at all times. Next we'll go ahead and assemble our SkyLine Tower System for the bars.
Now, this plastic piece here, and this piece that will fit along the bar itself, that comes with the bar. We'll go ahead and pop that plastic piece onto the top of our tower. We'll make sure that our bracket here's facing the right direction, and we're going to install that to the screw at the top of the tower here. Then take our included tightening tool and tighten it down to the tower itself. Now the best thing about this tightening tool is, you're going to hear 3 or 4 clicks once it's tightened down, therefore you know you haven't over tightened it, or under tightened it.
Slide this on to our CoreBar. Now before we actually took some measurements, and this is kind of a trial and error part of it. You want to measure from the edge here to the end of the bar, and you want it to be equal on both sides when you place this onto your vehicle. We'll take our measurement real quick. All right. Then we'll make our adjustments as needed. Now that we have everything adjusted, we'll tighten this center screw here until your hear those pops. Do this on both sides. All right. Now we'll finally close up our clamps here and secure it down. You can take out these plastic pieces here and replace it with the Yakima Same Key System for additional security to lock your roof rack to your vehicle. Finally, we'll put on our end caps, and I think we'll be good to go. There you have it for the Yakima CoreBar Roof Rack System on our 2013 Mazda CX-5.
Customer Reviews
Custom Fit Roof Rack Kit With Y00233 | Y00426 | Y53TR - Y27KB
Average Customer Rating: 4.8 out of 5 stars (158 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: David 04/26/2024
Parts arrived as advertised for the model
Car so happy to find the right fit
But super pricy for some plastic.
by: Bob L11/30/2023
product was just what I needed The folks at etrailer were extremely helpufl!!
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Dan B.05/01/2016
At first, a little tricky to install, as the kit comes with hardware for a variety of applications (different length/size bolts, etc). But after a quick look at the directions and identifying which bolt to use for my car, install was a breeze. I love this Yakima setup because I can remove the bars/towers and leave the landing pads with a cap. Makes it great for taking the canoe out on weekend trips, but not taking the fuel-economy hit during the weekday commute to work.
by: DogDoc04/12/2024
Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: 10/06/2023
Love it! We've made several long trips with full luggage loads.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Frank02/10/2023
Ford Edge
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
by: Andrew04/04/2023
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
by: Joseph08/23/2021
Pontiac Trans Sport Van
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
by: Andrew08/01/2023
Great! Easy to install!
by: Joao07/18/2023
Great service and great staff. They will have all the technical information you need.
by: Daryl04/29/2020
Jeep Cherokee
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Diane 07/28/2023
SIMPLE & EASY1
by: Luke07/20/2012
I got my new landing pads the day they said it would arrive. The pads were in their original yakima packaging, properly packed and overboxed. I work for a logistics company so I know the importance of getting product to a customer on time and exceeding their expectations. Very well done etrailer.com! The landing pads is just part of what I needed, and with the discount code included for my next purchase, I will be back. Thanks again.
by: SJHughes12/23/2017
High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.
by: Ryan. K05/25/2020
Very sturdy hold with a matte look and fine textured feel. Very light making for easy install.
by: Greg N.11/18/2021
Ford Expedition
I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!
by: Tom03/30/2021
Received order promptly thanks to help from Korren! Love Yakima products, well made, components all fit well. Instruction were easy to follow and the products have been well thought out in terms of markings, measuring distances to my specific car model and ease of assembly.
by: SJHughes12/23/2017
Simple installation to vehicle with supplied hardware and tools. Once these bases are installed to the vehicle, it is simple for a single person to install and remove crossbars and towers in just a couple of minutes.
25
649
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Recommended Roof Rack for a 2020 Hyundai PalisadeThe roof rack I recommend for a 2020 Hyundai Palisade is will be dependant on the roof type. If you have flush side rails then I recommend the Thule WingBar Evo Crossbar System part # TH711420, part # TH460R, and part # THKIT4093. If you have a bare roof then I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06145, and part # Y06138. These are both top of the line systems with custom fits and aero shaped crossbars for the least wind resistance.
view full answer... - Options for Roof Rack on 2016 Toyota Highlander With Naked RoofSince you asked for the two top options for your 2016 Toyota Highlander with a naked roof, I'll go ahead and list out all the parts for the two best, which are from Yakima, and Rhino-Rack: Yakima Roof Rack - Yakima JetStream Crossbars - Black # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06130 Rhino-Rack Roof Rack - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - RCH Legs for Rhino-Rack Crossbars # RRRCH4 - Custom RCP Fit Kit # RRRCP37-BK Among these options...
view full answer... - Roof Rack Recommendation to Carry Thule Pulse Box on 2018 Toyota HighlanderIn order to carry the Thule Pulse Large Rooftop Cargo Box # TH615 on your 2018 Toyota Highlander you will need crossbars that are perpendicular to your vehicle body so that the box can be parallel with the vehicle body. I really like the Yakima JetStream roof rack system because the crossbars are higher quality with that aero-style design and the legs have adjustments so you get the best fit possible. I'm guessing you have a naked roof but in the event that you do have the flush mount rails...
view full answer... - Roof Rack for 2006 Honda Pilot with Raised Side Rails to Haul Four KayaksWhile we have an option for your 2006 Honda Pilot with raised side rails, the longer 54 inch bars of the Rhino Rack are not confirmed to fit because the way they mount is via channels under the bars, and the Rhino Rack bars have channels that do not go all the way under the bar. If you take a look at the photo you can see the difference between the Rhino-Rack bars and Yakima JetStream bars that are the better option for longer crossbars because their channel runs all the way underneath....
view full answer...
- Options to Transport Bikes on My 2022 Hyundai Ionic Plug-In HybridWhile we do have a bike rack option for you, we currently do not have any hitches that we well that can allow you to mount a rack for your plug-in Hybrid 2022 Hyundai Ioniq. This is because since your model is a new model, manufacturers have not engineered a model that fits the exact design of your vehicle quite yet. With that being said, I recommend using a trunk bike rack like the Yakima FullBack 2 # Y02634 or the FullBack 3 # Y02633. Not only does the FullBack include a 35-pound per...
view full answer... - Roof Rack Recommendation for a 2019 Chevrolet Traverse LSI have excellent roof rack options for your 2019 Chevrolet Traverse LS that will accept a variety of roof mounted accessories, both track mount and clamp on. For this, I really like the Yakima JetStream System because they are aerodynamic, lightweight, and have a sleek look. The aerodynamic shape is going to reduce wind drag and noise which is not something most think about when looking at a roof rack. The correct parts for you will vary if you have a bare roof or raised side rails. I have...
view full answer... - Compatibility of Thule SnowPack Ski Carrier with Yakima Jetstream CrossbarsThe Thule SnowPack Ski and Snowboard Carrier - Low Profile - Locking - 6 Skis or 4 Boards - Silver # TH7326 is compatible with the Yakima Jet Sream Crossbars like # Y00426. The Jetstream bars are 3-1/8" wide x 1" tall with T-slot dimensions of 1" wide x 1/2" tall. You will need to determine if you are using the SpeedLink Mounting Hardware or the T-slot hardware. Either options will work well for mounting your carrier to the crossbars. If you are using the SpeedLink, the straps do need...
view full answer... - Best Roof Rack For 2024 Kia EV9 With Raised Side RailsThe best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - TimberLine Towers for Yakima Crossbars # Y33TR I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise. It is also highly durable,...
view full answer... - Recommended Roof Rack to Use the Yakima ShowDown on a 2013 Toyota RAV4 with Raised RailsIf you are interested in the Malone square bar roof rack then I recommend going with the 58" bars # MPG202 over the 50" bars # MPG201 for your 2013 Toyota RAV4. Reason being that the Yakima ShowDown # Y04081 requires that the crossbars extend at least 3-1/2" beyond the towers and I don't think you will achieve this with the 50" bars. As far as best goes, the Malone roof racks are good but they are entry level roof racks so they aren't quite as nice as other name brand options. In my opinion...
view full answer...
- Does the SportRack Horizon Rooftop Cargo Box Fit on the 2019 Ford Edge without a MoonroofThe SportRack Horizon Rooftop Cargo Box, part # SR7011, is designed to fit a variety of crossbars (including factory bars), so it will not be a problem fitting on your 2019 Ford Edge. If you do not have a roof rack and have no rails, I recommend the Yakima JetStream Crossbars, part # Y00426. They are aero-style bars that reduce wind drag and noise. To mount them, you will need the BaseLine Towers, part # Y28TR. You will also need the two fit kits, # Y06102 and # Y06139. I've linked to...
view full answer... - Are Yakima Jetstream Roof Rack Instructions for 2023 Ford F-350 Same as 2024 ModelsThe Yakima JetStream roof rack part numbers # Y00426, # Y28TR, # Y06185 that fits the 2024 Ford F-350 crew cab is the same as the 2023 models so the instructions are the exact same. So Jack, what that means is that the instructions were printed when the 23' model was the newest but it's definitely the same as the 24' models.
view full answer... - Can Yakima CoreBar Crossbars Be Cut To Desired LengthThe Timberline is actually the towers # Y33TR, so you will either have the CoreBar crossbars # Y00421 or the JetStream # Y00426. You can trim these bars to a shorter length and I do recommend using a new hack saw blade to do so. The aluminum crossbar will cut easily so you will want to make sure you have a very straight cut and take it slow or you would easily mar your bars. Make sure you double check your fit before making any cuts.
view full answer... - Can I Use the Thule Hullavator # TH898 with the Yakima JetStream Crossbars and Lock Cores?I just went ahead and looked up your orders and confirmed that you recently ordered the Yakima Same Key System (SKS) Lock Cores (QTY 4) # Y07204, the Yakima TimberLine Towers # Y33TR, and the 50" JetStream Crossbars # Y00425. The lock cores that you purchased install into the TimberLine towers and not into the end caps of the JetStream crossbars themselves. With that being said, the Thule Hullavator # Y00425 is compatible with the JetStream crossbars. It is important to note, though,...
view full answer...
- Will the Thule Hullavator Fit on Yakima Jetstream Crossbars on a 2021 Toyota HighlanderThe Thule Hullavator # TH898 will fit on the Yakima Jetstream bars without any issues and I do recommend going with the 60" bars just to ensure that you've got the needed clearance to use the Hullavator's lift assist system. If you've got a naked roof you'll want the Yakima roof rack system that uses parts # Y00426, # Y28TR, # Y06153 and # Y06132. If you've got the flush mounted rails you'll want to use # Y00426 for the bars still but use the # Y53TR and # Y66VR for the towers and landing...
view full answer... - Yakima Jetstream Roof Rack for Use with Thule Hullavator TH898 on 2018 Toyota HighlanderThe Thule Hullavator load-assisted kayak carrier # TH898 will directly mount onto just about any roof rack bar shapes, including round, square, aero, elliptical, most factory crossbars, and most crossbars with top "T-slot" channels. Yakima Jetstream bars will work fine so long as they are long enough. The most important compatibility requirements for mounting the Hullavator are that the cross bars extend out past the rack legs and by no less than 4 -inches and that they be at least 24-inches...
view full answer...
- Best Roof Rack and SUP Carrier for 2020 Toyota 4Runner with Raised Side RailsThe best roof rack for your 2020 Toyota 4Runner with raised side rails that so you can carry your stand-up paddleboards comes from Yakima and is made up of the following parts - Yakima JetStream Crossbars # Y00426 - TimberLine Towers for Yakima Crossbars # Y33TR - Same Key System Lock Cores (Optional) # Y07204 The reason this roof rack is the best for your '20 4Runner to carry your SUPs is because it is the only rack for your vehicle which has long, 60 inch crossbars, which is important...
view full answer...
- Roof Rack and Thule Cargo Box Recommendation for 2021 Kia Telluride with Naked RoofFor your 2021 Kia Telluride with a naked roof the best roof rack option is the Yakima JetStream rack part numbers # Y00426, # Y28TR, # Y06125, and # Y06165. This is the highest capacity roof rack that fits your vehicle, is the easiest to install, and has the quietest bar design. You could then carry a cargo box like the Thule Motion XT part # TH629707 which is similar in color to your vehicle and is very easy to use and well made.
view full answer... - Roof Rack Fit for 2018 GMC Sierra 3500 Denali Crew CabThat's a pretty awesome truck you have there, and there is a great roof rack that I can confirm is a fit for your 2018 GMC Sierra 3500HD Denali, which is a rack from Yakima. I checked with the manufacturer for you to make sure of the fit, and the parts you need for your truck are the following: - Yakima JetStream Crossbars - # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06122 This rack will give you the ability to...
view full answer... - Best Replacement Roof Rack for a 2019 Subaru Outback To Use With Thule HullavatorIt you do not wish to attach a set of crossbars to the raised side rails which just so happen to also be the crossbars in the stowed position on your 2019 Subaru Outback Wagon then you can use the Yakima JetStream Crossbar System part # Y00426, part # Y53TR, and part # Y00241 which actually replaces the factory crossbars. This option will be inline with the owner's manual and it does not limit your crossbar spread like the option that you mentioned would. The above would then allow you...
view full answer... - Roof Rack and Surfboard Carrier for 2018 Honda Odyssey with Roof Side RailsFor your 2018 Honda Odyssey with roof side rails the roof rack system I recommend is Yakima's JetStream bar rack made of parts # Y00426 and # Y33TR. This rack is compatible with the Inno Board Locker Surfboard Carrier # INA744. On your Odyssey this rack will install with a usefully-wide 52-inch bar spread for excellent stability for longer items like surfboards and kayaks. It provides a 165-lbs weight capacity too, which is typically plenty for all common rooftop cargo applications. The...
view full answer... - How Many BaseClips Are Used For a Yakima Roof Rack On a 2018 Jeep Grand Cherokee Without E-GroupYes, you will need to order two sets of the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06121 as one set only comes with two and you will need a total of four. In order to finish the roof rack on your 2018 Jeep Grand Cherokee you will also need the Yakima JetStream Crossbars part # Y00426 and the BaseLine Towers for Yakima Crossbars part # Y28TR. The easiest option to get your kayak up onto the roof of your Grand Cherokee is with the Yakima ShowDown Kayak or SUP Carrier...
view full answer...
- Yakima BaseLine Roof Rack for 2018 F150 Supercrew 4x4In addition to the # Y00426 JetStream crossbars and the # Y28TR BaseLine towers, you'll also need the # Y06122 BaseLine fit kit. If you wanted to go with the HD crossbars, the 78 inch long bars are part # Y01159 and you'd also need the SL adapter so the bars work with the BaseLine towers. The adapter is part # Y03541. According to Yakima, the fact that you have a sunroof won't prevent the rack from being installed, but I recommend taking care before operating it as it can interfere with...
view full answer...
- Recommended Roof Rack And Lift-Assist Kayak Carrier For A 2024 Ford Bronco For a 2024 Ford Bronco with raised rails I recommend the Yakima JetStream Crossbars # Y00426 along with the TimberLine Towers for Yakima Crossbars # Y33TR. These feet have straps to easily mount on your Bronco's raised rails and will allow you to meet the spread of a lift assist kayak carrier like the Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs # TH898.
view full answer... - Roof Rack For 2015 Toyota Highlander For Naked RoofThe video you referenced is for a 2015 Toyota Highlander with flush mounted rails; I checked directly with Thule and they do not have a roof rack fit for a naked roof on a '15 Highlander, just one with those flush mounted rails. So if you want a rack, you'd need a new set up. For that I would go with Yakima, as it is the that is the most similar in quality to a Thule rack. The parts that make up a Yakima roof rack for your 2015 Toyota Highlander are the following: - Yakima JetStream...
view full answer... - Yakima Parts to Fit American Roll Cover Tonneau Cover on a 2020 Chevy Silverado 1500I'd be happy to help! The Yakima SkyLine Towers # Y53TR are compatible directly with the JetStream crossbars so no adapter kit is needed, but if you're installing this over a truck bed you need the Yakima HD bars which do require an adapter. Unfortunately, crossbars and leg systems aren't compatible from one manufacturer to the other so you'll need to stick with Yakima crossbars for your application. If you already have the fit kit (which I believe is 2 of the Landing Pad # Y00221) for...
view full answer... - Do Yakima SkyLine Towers Fit a 2023 Chevrolet Blazer S Using Landing Pad 19Yes, the Landing Pad 19 # Y00245 are compatible with the SkyLine Towers for Yakima Crossbars # Y53TR. This will allow you to mount Yakima crossbars like the Yakima JetStream Crossbars # Y00425 on your 2023 Chevrolet Blazer S.
view full answer... - Roof Rack that Can Fit 2023 Jeep Wrangler Rubicon with Sky One Touch RoofThe Yakima Jetstream roof rack part numbers # Y00428, # Y53TR, # Y00226 is a fit for your 2023 Jeep Wrangler Rubicon that has the sky one touch roof and would do a great job to carry a tent and other cargo.
view full answer... - Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side RailsIn order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
view full answer... - Roof Rack Recommendation to Carry Thule Pulse Box on 2018 Toyota HighlanderIn order to carry the Thule Pulse Large Rooftop Cargo Box # TH615 on your 2018 Toyota Highlander you will need crossbars that are perpendicular to your vehicle body so that the box can be parallel with the vehicle body. I really like the Yakima JetStream roof rack system because the crossbars are higher quality with that aero-style design and the legs have adjustments so you get the best fit possible. I'm guessing you have a naked roof but in the event that you do have the flush mount rails...
view full answer... - Best Roof Rack for 2020 Mazda CX-30 with Naked RoofThe best roof rack for your 2020 Mazda CX-30 with a naked roof is from Yakima and is made up of the following parts: - Yakima JetStream Crossbars # Y00425 (Black) - SkyLineTowers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima SkyLine and Control Towers # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack system is the best for your 2020 Mazda CX-30 because it gives you a rare combination of being very quiet, simple to use, and durable while also looking stellar...
view full answer... - High Capacity and Aerodynamic Roof Rack Recommendation for 2019 Honda PilotFor a quiet and higher capacity roof rack for your 2019 Honda Pilot for carrying a roof tent the Yakima HD roof rack part numbers # Y01156,# Y53TR, # Y03541, and # Y00245 is the way to go. The bars are aero shaped for quietness and also have the highest weight capacity as well.
view full answer... - Yakima Jetstream Roof Rack for 2021 Subaru OutbackThe Yakima JetStream roof rack part numbers # Y00425, # Y53TR, and # Y46VR is an extremely nice roof rack for your 2021 Subaru Outback Wagon. This is what I would go with because in terms of quality, ease of use/install, quietness, and durability it really is outstanding.
view full answer... - Recommended Roof Rack for 2024 Subaru OutbackFor a stylish roof rack that keeps the noise down on your 2024 Outback I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00425 -SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream bars have a sleak look with an asymmetrical JetFlow shape. This combined with the built-in WindRidges seriously reduces vibration...
view full answer... - Roof Rack Replacement for OEM Crossbars to Carry Rooftop Tent on 2022 Subaru Outback WagonI'd be more than happy to help! To utilize a rooftop tent, like the Yakima SkyRise HD # Y07437, you'll actually need to remove your factory rack and replace it with an aftermarket kit. I really like the Yakima JetStream roof racks because they are not only great quality, but the legs have adjustments in them to ensure that you get the best fit possible. For this setup you'll need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 27 - # Y46VR Lock...
view full answer...
- Recommended Roof Rack for a 2022 Mercedes-Benz Sprinter 2500I have the perfect solution for you with the Yakima JetStream roof rack: 70" JetStream Crossbars - # Y00427 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 Lock Core Kit - # Y07204 (optional) This is designed to fit flush rails with a track like what you have on your 2022 Mercedes-Benz Sprinter 2500 so that you can slide the crossbars front and back depending on what you'll be carrying. I really like this rack system because it has some fined-tuned steps that give you the best fit possible,...
view full answer... - What Yakima Roof Rack Do You Recommend For My 2022 Toyota Tacoma With A Camper ShellYou will be able to put Yakima tracks on your shell. The rack will consist of the following: Yakima 42" Tracks for Roof Racks, part # Y01126 Yakima CoreBar Crossbars, part # Y00421, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. The crossbars have a weight limit of 220 lbs, but check your shell owner's manual to find out its weight limit. Your racks maximum...
view full answer... - Is There A Way To Install a Hitch Bike Rack On a 2020 Kia Soul GT TurboThe best option to carry a bike(s) on a 2020 Kia Soul GT Turbo is with a roof rack and roof mounted bike rack. The reason for this is because there is not a trailer hitch available due to the design of the rear exhaust. I can't be certain but if I had to guess I would say there is not going to be a hitch for the GT Turbo model because there is just nowhere to put the receiver tube. For a roof rack, the best option is the Yakima JetStream Crossbar part # Y00425, part # Y53TR, and part...
view full answer... - Roof Rack Option For 2016 Toyota 4Runner With Factory RailsThe standard roof rack fits for your 2016 Toyota 4Runner are all designed for the factory raised rails, but since you said you were okay with drilling holes you could add a track system to your roof. You would use whichever length is right for your 4Runner, the Yakima 42" Tracks for Roof Racks # Y01126 or 54" Tracks # Y01127. Then you'd just need the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers # Y53TR - Landing Pad 1 # Y00221 You'd need a total of four of the...
view full answer... - Can Thule Crossbars Be Used on Yakima SkyLine Towers for 2021 Toyota Highlander with Flush RailsRoof rack manufacturers have parts that only fit with their product line so if you have Yakima SkyLine Towers for your 2021 Toyota Highlander (with flush rails) then you need the following parts to have a complete roof rack system: - 50" JetStream Crossbars # Y00425 - SkyLine Towers # Y53TR - Landing Pad 28 # Y66VR - Lock Core Kit # Y07204 (optional) While I do like the design of the Thule WingBar Evo Crossbars a little more than the Yakima alternative, the JetStream Crossbars are...
view full answer...
- Platform Tray/Roof Rack that Fits 2018 Jeep Grand Cherokee TrailhawkFor your 2018 Jeep Grand Cherokee we don't have a Rhino Rack Pioneer platform that fits your roof rails directly but we have the very similar Yakima LockNLoad Platform Tray setup part numbers # Y05044, # Y53TR, # Y05042-2, and # Y00244 which does fit your rail setup directly. This tray is 55 inch by 49 inch. We can't recommend opening your roof with this installed though as it might interfere but also it's going to cause quite a bit of wind noise.
view full answer... - Cargo Basket Mounted on an UltraGroove Tonneau Cover on a 2016 Ford F-150We do have Yakima and Thule crossbar systems that will install with your UltraGroove Tonneau Cover. For Yakima, you can go with the HD Bars, choosing whichever length works best for you. We have a 68" set, part # Y01158, and a 78" set, part # Y01159. To pair them with your tonneau tracks, combine the bars with the HD Bar SL Adapter, part # Y03541; the Skyline Towers, part # Y53TR; and the Landing Pad 19, part # Y00245. I've linked to a video review of the HD Bars. For the Thule crossbars,...
view full answer... - Can I Install A Rooftop Tent On My 2021 Honda CR-V With Flush Rails?To make sure that you can get the spread you need to have to mount your rooftop tent you'll need to take some measurements. On your flush rails there will be fixed mounting points on the top of the rails. When you have flush rails you won't be able to adjust the spread at all. That is your maximum mounting width. If the fixed mounting points match up to your rooftop tent, you can get a roof rack for your 2021 Honda CR-V. I Recommend getting a hefty system like the Yakima HD Bars # Y01156...
view full answer... - Extra Large Roof Cargo Basket Recommendation for 2003 Ford ExcursionThe Yakima MegaWarrior part # Y07080-82 would fit your vehicle if it came with factory crossbars and measures 74" long x 48" wide x 6-1/2" tall. If you needed a roof rack you would want the Yakima rack that consists of part numbers # Y00409, # Y53TR, # Y03536, # Y00221.
view full answer... - Will the Thule Hullavator Fit on Yakima Jetstream Crossbars on a 2021 Toyota HighlanderThe Thule Hullavator # TH898 will fit on the Yakima Jetstream bars without any issues and I do recommend going with the 60" bars just to ensure that you've got the needed clearance to use the Hullavator's lift assist system. If you've got a naked roof you'll want the Yakima roof rack system that uses parts # Y00426, # Y28TR, # Y06153 and # Y06132. If you've got the flush mounted rails you'll want to use # Y00426 for the bars still but use the # Y53TR and # Y66VR for the towers and landing...
view full answer... - Roof Rack For 2023 Cadillac XT4By cross rails I believe you are referring to a roof rack, and we do have a fit for a roof rack on your 2023 Cadillac XT4, from Yakima. The rack consists of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 19 # Y00245 This rack will not only fit your '23 XT4, it will provide it with a quietest, durable, easy-to-use roof rack that also looks great. The rack is quiet because it has "WindRidges"...
view full answer... - Best Yakima Roof Rack For 2020 Jeep Grand Cherokee With Black and Chrome TrackI recommend the Yakima JetStream Crossbars # Y00425 with the SkyLine Towers part # Y53TR and landing pads for the towers part # Y00244. The JetStream and CoreBar are very similar with a 165 lb capacity and aerodynamic design to cut down on wind noise. However, The JetStream bars offer the T-slot for accessories with a rubber weather strip that does not require trimming like it did in the past. I highly recommend using the JetStream bars with the T-Slot and getting the Yakima FatCat Ski...
view full answer... - What Do I Need To Attach A Yakima Rack To My RetraxPro Tonneau CoverYour RetraxPro tonneau cover comes with T-slots. The Yakima rack that is compatible with t-slots will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 70" Long - Qty 2, part # Y00423, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2. part # Y00221, X 2 Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204 This rack will have a weight limit of 220 lbs. The Yakima CoreBars are elliptical in shape...
view full answer... - Recommended Roof Rack and Fork Mount Bike Rack for 2021 Jeep Grand Cherokee LFor a roof rack for your 2021 Jeep Grand Cherokee L with flush mounted rails that run front to back I recommend the Yakima JetStream roof rack. This rack includes part numbers # Y00425, # Y53TR, and # Y00245. This roof rack has 50" crossbars and a 165 lb capacity to hold your bikes. This roof rack is also lockable with the Yakima Same Key System if you add the # Y07204 lock cores. For a bike carrier, I recommend the Yakima ForkLift Roof Mounted Bike Carrier # Y02098. You will need one...
view full answer... - Availability of a Roof Cargo Basket For 2011 Ford Transit Connect With Fixed Factory Roof MountsI would recommend to use the Yakima Roof Rack System with a Yakima cargo basket. For the roof rack, you will need 3 parts: Landing Pad 11, # Y00233 SkyLine Towers, # Y53TR RoundBar SL Adapter, # Y03536 Round 48 Inch CrossBars for Yakima Roof Rack System, # Y00408 I am including a link to a video review on the Yakima roof rack system. With the Yakima roof rack installed on your vehicle you can then install the Yakima LoadWarrior Roof Rack Cargo Basket, part # Y07070-74. I am including...
view full answer... - Recommendation for Carrying 2 Kayaks on a 2017 Subaru ImprezaWe do have a hitch that will fit your 2017 Subaru Impreza, which is the Draw-Tite # DT24959. If you choose to tow a Kayak trailer, this hitch will work well. However, when I looked up the owner's manual for your Impreza it said that your vehicle was not made or intended for towing trailers. I have another solution that will not void your vehicle's warranty. Yakima has a roof rack system that will allow you to carry both Kayaks, as long as you do not go over your Subaru's roof weight capacity....
view full answer... - Does Yakima Roof Rack For Fixed Mounting Points Fit 2015 Mazda CX-5The Yakima roof rack for fixed mounting points will fit your 2015 Mazda CX-5, yes. Your CX-5 (and all others) do have those fixed mounting points under the ditch molding trim you referred to, so it will work, with the correct part numbers being the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 11 # Y00233 - (Optional) Yakima Same Key System (SKS) Lock Cores # Y07204 As for the crossbars, they are made of anodized aluminum...
view full answer... - Roof Rack and Kayak Carrier Recommendations for 2003 Mazda Protégé 5You'll need to begin by adding a roof rack to your Mazda, which consists of the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 11 for Yakima Control Towers - Qty 4 # Y00233 Once the rack's in place, the # Y04074 SweetRoll Kayak carrier would be an excellent choice for you. Tie straps for the kayak to the crossbars and for the bow/stern are included.
view full answer... - Recommended Heavy Duty Roof Rack for a 2018 Ford FlexIt sounds like you might be looking for a roof rack for your 2018 Ford Flex that is both long and heavy duty. If that is the case then the best option for you is going to be dependent on your roof construction. If you have a bare roof then I recommend using the Yakima HD Crossbar System which is composed of part # Y01157, part # Y53TR, part # Y03541, and part # Y00233. If you have raised side rails then I also recommend the Yakima HD Crossbar System but this is composed of part # Y01157,...
view full answer... - Cargo Box Recommendation for a 2014 Subaru Forester with Fixed PointsFor a Yakima roof rack confirmed to fit the fixed points of your 2014 Subaru Forester you would need the SkyLine Towers and RoundBar SL Adapter parts # Y53TR and # Y03536, 2 sets of the LandingPad 11 # Y00233, and a set of 2 48 inch crossbars # Y00408. The Yakima MegaWarrior # Y07080 has been confirmed to fit this rack as well. I checked with Yakima and all of their cargo boxes we carry are confirmed to fit this rack. I attached a link to al of them to the right.
view full answer... - Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side RailsFor your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
view full answer... - Recommended Roof Rack And Watersport Carrier For 2007 BMW 325iI first recommend a roof rack for your 2007 BMW and then a carrier that can handle either the kayak or a paddleboard. The roof rack I recommend is the Yakima Jetstream. This roof rack has Black Aluminum aerodynamic crossbars that have built-in WindRidges to help control the air flow and reduce wind noise and vibration. The towers included with the roof rack are designed to fit the fixed mounting points on the vehicle roof. To order this roof rack you will need part # Y00425, part # Y53TR,...
view full answer... - Recommended Fixed Point Roof Rack For 2015 Mazda CX-9 Naked RoofThere are a couple options to fit the fixed mounting points of your 2015 Mazda CX-9. I recommend the Thule Rack consisting of: Thule WingBar Load Bars - Aluminum - Black - 53" - Qty 2 # TH711420 Thule Podium Foot Pack for Aero Bars # TH460R Thule Fit Kit for Podium Style Foot Pack, # THKIT3069 We also have the Yakima rack which also has a great reputation consisting of: Yakima JetStream Crossbars - Aluminum- 60" Long - Qty 2 # Y00426 SkyLine Towers for Yakima Crossbars - Fixed Mounting...
view full answer... - Roof Rack Recommendation for 2016 Subaru WRX STiWe do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
view full answer... - Parts Needed to Adapt Yakima Roof Rack for a Ford Taurus X to a 2012 Ford FlexTo install a roof rack system on your 2012 Ford Flex, you will need a set of SkyLine Towers, # Y53TR, a set of RoudBar Adapters, # Y03536, and the landing pads, # Y00233. Along with a set of Yakima CrossBars. Yakima recommends 58 inch CrossBars, # Y00409. If your previous Taurus X used 58 inch CrossBars, my research shows it most likely does, then you would not need to purchase new CrossBars.
view full answer... - Roof Rack Recommendation for 2017 Ram ProMaster City to Use Rhino Rack Batwing AwningLike you mentioned the Rhino Rack Batwing Awning part # RR33200 that you referenced does require a roof rack with top channels so for your 2017 Ram ProMaster City with a naked roof you would need a rack like the Yakima HD Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which does have a track on top of the crossbars.
view full answer... - Roof Rack for a 2018 Subaru WRX to use OEM Subaru AcessoriesI recommend the Yakima Jet Stream kit for your application, based on the shape of the previous bars you had. This kit provides you with aero shaped bars that are very similar to the 2011 Subaru Impreza's factory bars. This rack installs into the fixed points on your roof, however is not compatible if you have a glass roof on your Subaru. The kit consists of: JetStream Crossbars, 50 inches, part # Y00425 SkyLine Towers, part # Y53TR Landing Pad 11 for Yakima Towers, part # Y00233 This...
view full answer... - Will the Surco Safari Roof Baskets Work with Rola Roof Rack CrossbarsI do have an option that will allow you to mount a Surco Safari Basket to the roof of your 2017 Ram ProMaster City but the crossbars of the Rola Haul-Your-Might Truck Bed Ladder Rack 59742 will not work with the mounting feet used on the ProMaster City Roof Rack by Rola 59633 because the crossbars on the ladder rack are too long for your vehicle. Since the crossbars are different lengths the mounting holes on the feet will not line up with the mounting holes on the crossbar. Also, the...
view full answer... - 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier RecommendationFor a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
view full answer...
- Recommended Roof Rack For a 2013 Ford Transit ConnectI recommend the Yakima HD roof rack for your 2013 Ford Transit Connect. This will consist of the Crossbars # Y01156, Towers # Y53TR, Adapters # Y03541 and Fit Kit # Y00233. I prefer this option as the bars have a versatile design to accept either track or clamp on accessories plus the endcap has an integrated tie-down point to help secure your cargo.
view full answer... - Yakima Roof Rack Parts for 2018 Subaru WRXYes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
view full answer... - Roof Rack Recommendation for a 2009 Ford Flex with Vista RoofYou will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
view full answer... - Longest Roof Rack Bars That Fit a 2015 Subaru Impreza HatchbackSince you are wanting to use crossbars that may be longer than what is recommended from the manufacturer I would go with a Yakima system. Their JetStream Crossbars have a track system on the bottom that allow them to be more versatile than many other roof racks from competitors. If your 2015 Subaru Impreza Hatchback has a naked roof then you need the SkyLine Towers # Y53TR and Landing Pad 11 # Y00233. For raised rails you simply need the TimberLine Towers # Y00147. In addition to the...
view full answer... - Recommendation for Carrying 4 Bikes on BMW 535iThe 2015 BMW 5 Series will use a Class I trailer hitch like the Curt trailer hitch # C11381. Due to their limited tongue weight capacity Class 1 trailer hitches are limited to carrying 2 bikes so you won't be able to carry four bikes with the Swagman Titan Bike Rack # S63410. The limited tongue weight capacity (maximum amount of downward force that can be safely applied to the hitch) is one reason, but additional bikes after the first two move the load further rearward away from the receiver...
view full answer... - Roof Rack Recommendation for 2011 Ford Flex to Carry Yakima ShowDown Assisted Kayak CarrierFor your 2011 Ford Flex with a naked roof Yakima does offer a roof rack solution that fits your vehicle that will allow you to use the Yakima Showdown part # Y04081 that you referenced. For that you'd need the part numbers # Y00422, # Y53TR, and # Y00233 and you'd be set. This is a custom fit rack that gives you aero shaped bars that will work great with the Showdown.
view full answer... - Recommended Roof Rack for 2017 Subaru Impreza SportI do have a solution for you, however the Rola Sport APE Series Roof Rack referenced in your question is not a confirmed fit for your 2017 Impreza Sport with no existing rails or crossbars. For a similar aero style crossbar, I recommend the Yakima Roof Rack that consists of # Y00421 for the two 50 inch crossbars, # Y53TR for the SkyLine Towers and # Y00233 for the Landing Pads. This roof rack is confirmed to fit your vehicle and has a weight capacity of 165 pounds, although you will also...
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - Method to Reduce Wind Noise from Roof Rack on 2014 Mazda 3Roof rack crossbars do generate noise and some make more noise than others. Round and square bar roof racks tend to be the noisiest and elliptical and aerodynamic bars tend to make less noise. No roof rack will be particularly quiet when you have your sunroof open. That is just the nature of the beast. You can sometimes reduce the noise level of a roof rack by adding a fairing to the front bar, such as Inno's # INA262. These usually help the noisier round and square bar roof racks like...
view full answer... - Availability of a Roof Cargo Basket For 2011 Ford Transit Connect With Fixed Factory Roof MountsI would recommend to use the Yakima Roof Rack System with a Yakima cargo basket. For the roof rack, you will need 3 parts: Landing Pad 11, # Y00233 SkyLine Towers, # Y53TR RoundBar SL Adapter, # Y03536 Round 48 Inch CrossBars for Yakima Roof Rack System, # Y00408 I am including a link to a video review on the Yakima roof rack system. With the Yakima roof rack installed on your vehicle you can then install the Yakima LoadWarrior Roof Rack Cargo Basket, part # Y07070-74. I am including...
view full answer... - Recommendation for Carrying 2 Kayaks on a 2017 Subaru ImprezaWe do have a hitch that will fit your 2017 Subaru Impreza, which is the Draw-Tite # DT24959. If you choose to tow a Kayak trailer, this hitch will work well. However, when I looked up the owner's manual for your Impreza it said that your vehicle was not made or intended for towing trailers. I have another solution that will not void your vehicle's warranty. Yakima has a roof rack system that will allow you to carry both Kayaks, as long as you do not go over your Subaru's roof weight capacity....
view full answer... - Does Yakima Roof Rack For Fixed Mounting Points Fit 2015 Mazda CX-5The Yakima roof rack for fixed mounting points will fit your 2015 Mazda CX-5, yes. Your CX-5 (and all others) do have those fixed mounting points under the ditch molding trim you referred to, so it will work, with the correct part numbers being the following: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 11 # Y00233 - (Optional) Yakima Same Key System (SKS) Lock Cores # Y07204 As for the crossbars, they are made of anodized aluminum...
view full answer... - Roof Rack and Kayak Carrier Recommendations for 2003 Mazda Protégé 5You'll need to begin by adding a roof rack to your Mazda, which consists of the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 11 for Yakima Control Towers - Qty 4 # Y00233 Once the rack's in place, the # Y04074 SweetRoll Kayak carrier would be an excellent choice for you. Tie straps for the kayak to the crossbars and for the bow/stern are included.
view full answer... - Recommended Heavy Duty Roof Rack for a 2018 Ford FlexIt sounds like you might be looking for a roof rack for your 2018 Ford Flex that is both long and heavy duty. If that is the case then the best option for you is going to be dependent on your roof construction. If you have a bare roof then I recommend using the Yakima HD Crossbar System which is composed of part # Y01157, part # Y53TR, part # Y03541, and part # Y00233. If you have raised side rails then I also recommend the Yakima HD Crossbar System but this is composed of part # Y01157,...
view full answer... - Cargo Box Recommendation for a 2014 Subaru Forester with Fixed PointsFor a Yakima roof rack confirmed to fit the fixed points of your 2014 Subaru Forester you would need the SkyLine Towers and RoundBar SL Adapter parts # Y53TR and # Y03536, 2 sets of the LandingPad 11 # Y00233, and a set of 2 48 inch crossbars # Y00408. The Yakima MegaWarrior # Y07080 has been confirmed to fit this rack as well. I checked with Yakima and all of their cargo boxes we carry are confirmed to fit this rack. I attached a link to al of them to the right.
view full answer... - Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side RailsFor your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y33TR. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
view full answer... - Recommended Roof Rack And Watersport Carrier For 2007 BMW 325iI first recommend a roof rack for your 2007 BMW and then a carrier that can handle either the kayak or a paddleboard. The roof rack I recommend is the Yakima Jetstream. This roof rack has Black Aluminum aerodynamic crossbars that have built-in WindRidges to help control the air flow and reduce wind noise and vibration. The towers included with the roof rack are designed to fit the fixed mounting points on the vehicle roof. To order this roof rack you will need part # Y00425, part # Y53TR,...
view full answer... - Recommended Fixed Point Roof Rack For 2015 Mazda CX-9 Naked RoofThere are a couple options to fit the fixed mounting points of your 2015 Mazda CX-9. I recommend the Thule Rack consisting of: Thule WingBar Load Bars - Aluminum - Black - 53" - Qty 2 # TH711420 Thule Podium Foot Pack for Aero Bars # TH460R Thule Fit Kit for Podium Style Foot Pack, # THKIT3069 We also have the Yakima rack which also has a great reputation consisting of: Yakima JetStream Crossbars - Aluminum- 60" Long - Qty 2 # Y00426 SkyLine Towers for Yakima Crossbars - Fixed Mounting...
view full answer... - Roof Rack Recommendation for 2016 Subaru WRX STiWe do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
view full answer... - Parts Needed to Adapt Yakima Roof Rack for a Ford Taurus X to a 2012 Ford FlexTo install a roof rack system on your 2012 Ford Flex, you will need a set of SkyLine Towers, # Y53TR, a set of RoudBar Adapters, # Y03536, and the landing pads, # Y00233. Along with a set of Yakima CrossBars. Yakima recommends 58 inch CrossBars, # Y00409. If your previous Taurus X used 58 inch CrossBars, my research shows it most likely does, then you would not need to purchase new CrossBars.
view full answer... - Roof Rack Recommendation for 2017 Ram ProMaster City to Use Rhino Rack Batwing AwningLike you mentioned the Rhino Rack Batwing Awning part # RR33200 that you referenced does require a roof rack with top channels so for your 2017 Ram ProMaster City with a naked roof you would need a rack like the Yakima HD Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which does have a track on top of the crossbars.
view full answer... - Roof Rack for a 2018 Subaru WRX to use OEM Subaru AcessoriesI recommend the Yakima Jet Stream kit for your application, based on the shape of the previous bars you had. This kit provides you with aero shaped bars that are very similar to the 2011 Subaru Impreza's factory bars. This rack installs into the fixed points on your roof, however is not compatible if you have a glass roof on your Subaru. The kit consists of: JetStream Crossbars, 50 inches, part # Y00425 SkyLine Towers, part # Y53TR Landing Pad 11 for Yakima Towers, part # Y00233 This...
view full answer... - Will the Surco Safari Roof Baskets Work with Rola Roof Rack CrossbarsI do have an option that will allow you to mount a Surco Safari Basket to the roof of your 2017 Ram ProMaster City but the crossbars of the Rola Haul-Your-Might Truck Bed Ladder Rack 59742 will not work with the mounting feet used on the ProMaster City Roof Rack by Rola 59633 because the crossbars on the ladder rack are too long for your vehicle. Since the crossbars are different lengths the mounting holes on the feet will not line up with the mounting holes on the crossbar. Also, the...
view full answer... - 2010 Mitsubishi Outlander Roof Rack and Kayak Carrier RecommendationFor a Yakima roof rack to fit your 2010 Mitsubishi Outlander that has factory fixed points for a roof rack you are going to need two sets of the Landing Pad 11 part # Y00233, SkyLine Towers part # Y53TR, RoundBar SL Adapter part # Y03536 and 48 inch crossbars # Y00408. I attached a picture I got from Yakima that shows this rack installed on a similar Outlander as yours. The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit this rack well.
view full answer... - Recommended Roof Rack For a 2013 Ford Transit ConnectI recommend the Yakima HD roof rack for your 2013 Ford Transit Connect. This will consist of the Crossbars # Y01156, Towers # Y53TR, Adapters # Y03541 and Fit Kit # Y00233. I prefer this option as the bars have a versatile design to accept either track or clamp on accessories plus the endcap has an integrated tie-down point to help secure your cargo.
view full answer... - Yakima Roof Rack Parts for 2018 Subaru WRXYes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
view full answer... - Roof Rack Recommendation for a 2009 Ford Flex with Vista RoofYou will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
view full answer... - Longest Roof Rack Bars That Fit a 2015 Subaru Impreza HatchbackSince you are wanting to use crossbars that may be longer than what is recommended from the manufacturer I would go with a Yakima system. Their JetStream Crossbars have a track system on the bottom that allow them to be more versatile than many other roof racks from competitors. If your 2015 Subaru Impreza Hatchback has a naked roof then you need the SkyLine Towers # Y53TR and Landing Pad 11 # Y00233. For raised rails you simply need the TimberLine Towers # Y00147. In addition to the...
view full answer... - Recommendation for Carrying 4 Bikes on BMW 535iThe 2015 BMW 5 Series will use a Class I trailer hitch like the Curt trailer hitch # C11381. Due to their limited tongue weight capacity Class 1 trailer hitches are limited to carrying 2 bikes so you won't be able to carry four bikes with the Swagman Titan Bike Rack # S63410. The limited tongue weight capacity (maximum amount of downward force that can be safely applied to the hitch) is one reason, but additional bikes after the first two move the load further rearward away from the receiver...
view full answer... - Roof Rack Recommendation for 2011 Ford Flex to Carry Yakima ShowDown Assisted Kayak CarrierFor your 2011 Ford Flex with a naked roof Yakima does offer a roof rack solution that fits your vehicle that will allow you to use the Yakima Showdown part # Y04081 that you referenced. For that you'd need the part numbers # Y00422, # Y53TR, and # Y00233 and you'd be set. This is a custom fit rack that gives you aero shaped bars that will work great with the Showdown.
view full answer... - Recommended Roof Rack for 2017 Subaru Impreza SportI do have a solution for you, however the Rola Sport APE Series Roof Rack referenced in your question is not a confirmed fit for your 2017 Impreza Sport with no existing rails or crossbars. For a similar aero style crossbar, I recommend the Yakima Roof Rack that consists of # Y00421 for the two 50 inch crossbars, # Y53TR for the SkyLine Towers and # Y00233 for the Landing Pads. This roof rack is confirmed to fit your vehicle and has a weight capacity of 165 pounds, although you will also...
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - Method to Reduce Wind Noise from Roof Rack on 2014 Mazda 3Roof rack crossbars do generate noise and some make more noise than others. Round and square bar roof racks tend to be the noisiest and elliptical and aerodynamic bars tend to make less noise. No roof rack will be particularly quiet when you have your sunroof open. That is just the nature of the beast. You can sometimes reduce the noise level of a roof rack by adding a fairing to the front bar, such as Inno's # INA262. These usually help the noisier round and square bar roof racks like...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Video Edited:
Chris R
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.