Inno Aero Roof Rack for Naked Roofs - Aluminum - Black - Qty 2
This item does not fit your vehicle
2027 Tesla Model 3
These items fit your vehicle
2027 Tesla Model 3
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This setup gives you everything you need for a strong, stable base to carry your gear. It includes 2 aero crossbars, 4 through feet, and a custom fit kit that installs on a naked roof. The aluminum construction keeps it sturdy yet lightweight, and the 165-lb weight capacity lets you haul a serious load of kayaks, cargo boxes, or other adventure gear with confidence.
Driving with bars on your roof can create wind noise that wears on long drives. These crossbars use an aerodynamic shape and rubber strips in the top channels to help smooth airflow and reduce vibration. The strips also press down around your accessory hardware so there’s no need for trimming or fussing—just quiet, efficient performance mile after mile.
Whether you’re hauling a cargo box for a road trip or strapping down kayaks for the weekend, these bars make swapping setups simple. The top channels accept channel-mount hardware, while their shape also fits clamp-on accessories. That means you can use most universal carriers for cargo, water, snow, or bikes without needing separate crossbars for each type of gear.
When you park at the trailhead or stop overnight on a trip, it’s good to know your rack is secure. The lockable leg covers add theft deterrence so the system stays where it belongs—ready for the next outing.
The aluminum build resists rust and wear from weather exposure while keeping weight low for easier handling. Finished in black for a clean look, each bar measures 54" long x 3-1/8" wide x 1-3/16" tall, giving plenty of surface area for stable mounting that still looks sleek on top of your ride.
Alternate Instructions
Ratings & Reviews
Great racks. High quality parts. Fit perfectly. Went together easily.
Once I realized which bar was the front one and which was the back it was a fairly easy install. Since the measurements for the foot placement were wrong in the instructions I would suggest not tightening the feet all the way to the bars until you put it on the car. It would have been nice if both sets of rubber pads were the same, with the tunnel hook, and if they had adhesive backing to avoid losing them. I added 2 sided tape.
Has worked great for transporting my fishing Kayak as well as small loads of lumber. It has worked fine for about a dozen and a half boards at a time or a couple of sheets of plywood. Just make sure that you have a good way to strap them down as well as maybe a rubber mat to help hold everything in place. The noise from it on the high way can be a lot but certainly not as bad as some that I have heard. I figure that anything on the outside of a vehicle like that will produce some noise.
We love our Inno roof rack! It’s well built, was easy to install on top of my 2012 Ford Flex, and has stayed in place without shifting or loosening since we initially installed it. Well worth the investment!
These feet are easy to use and go well wit the Inno system. I was worried since my car did not come with any roof racks, but this is the solution to haul things on my roof. They work well and are very secure.
Great fit for my 2023 4Runner and looks amazing.
I was concerned that other brands that clamp to the existing roof rails could pop-off from upward forces due to bumps/wind (I have 2 17’ sea kayaks) - these INNO clamps have a strap that securely holds the bars in place.
Perfect height to be able to get straps/clamps under the bars, but low enough to keep them from hitting my garage door opening.
Great quality and super easy to install.
Started assembly last summer and finally completed installation this spring. Directions took a lot of attention to detail but were adequate. Rack went on car securely and looks great. Have attached kayak rack and a roof pod and both worked flawlessly. Would definitely recommend.
I have had countless bike racks over the years and this is by far the best system I have ever had. Fits like a glove on my F150. Easy to install, looks great and the bikes do not move when on the roof.
These are made perfectly for your vehicle. They are very secure when combined with the other Inno products. No worries of the rack system coming off. Using them to transport kayaks using kayak holders.
These crossbars are awesome!
Tule and Yakima did not have a rack for my Nissan murano. So it was a blessing to find the immo rack. It seems like it can fit any car model. It's strong and secure. I feel my equipment will be safe with this rack.
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
Easy install on 2021 4runner off road premium. Looks clean, matchs blacked out on white, eadges of chrome cap matches mirror accents and tail lights. Etrailer video was simple to follow. What it didn't show was the foam rubber strips that you put on under the t tracks slot. With cover off and top most flat part of clamp to edge of bar measures about 5.5inches. Make sure the clamp is flush with bar when you measure. Overall looks good
etrailer was the only vendor who had the custom fit roof rack feet I needed for my vehicle. I was trying to put a roof rack onto a Dodge Durango SRT...not a typical vehicle for this accessory! I looked everywhere for a suitable roof rack and thought I was settling by ordering the Inno kit from etrailer. I could not have been more wrong! I am so happy with the purchase!
One was extremely hard to get on compared to the others (not sure if it was rough machining or something), but once it was on, all was good.
Waste of money. Most annoying couple hours spent in a long time. Extremely disappointed. Does not fit well. Not exactly a cheap option, but a cheap option in terms of fit and engineering. The instructions online and in the kits do not agree. But there is no helping the design. Plus there are no universal set of instructions--they are all individual items for the fit kit, the bars, etc. But a reasonably inclined person can figure it out so no big deal, but the engineering design is garbage--requires precise measurement yet the design is such that exact measurement is impossible due to the design.
Additionally, the parts are low quality Either low density plastic or easily stripped bolts. Even when as precise as possible, I wouldn't trust it with my kayak. What a mistake. Do yourself a favor and get a Yakima trailer or similar. It isn't that much more money in the scheme of things and then it isn't tied to your car. Can add a hitch to most vehicles anyway.
Works as described. Perfect fit for my 9th gen (2013) Honda Accord Sport. Easy and straight forward install. I followed instructions online rather than the ones included
Installation was a little tricky but once the "feet" were attached to the roof and the bars properly spaced, everything wrapped up very well.
There is no noticeable wind noise with these installed.
I bought these as part of a kit with 60" Aero bars and the appropriate kit for my 14 Flex. I spent probably an hour and a half double checking my measurements and getting them torqued down properly. I spaced the bars on top of the car just a little wider than proscribed because I was planning on carrying 4x8 plywood, and it looked better to my eye. One thing to watch for: The instructions for the car-specific kit (in my case INK263) show the foot spacing measurements for a square bar, and the measuring point for these feet and Aero bars is different. That measurement point is indicated in the instructions for the feet, not the kit. Same numbers, just different reference point. Otherwise, they look good and are rock solid.
We recently purchased 2 kayaks & Thule roof racks from our local outdoor store.
After waiting 2 weeks for our roof racks and J bars to come in we found that the Thule racks did not fit our 2017 Lincoln MKX and they didn't make any racks that would. The vehicle does not have roof racks and has a moon roof.
After a couple of days searching the internet we discovered etrailer.com. We found the Inno roof racks, but still was not sure they would work. We spoke to a repesenative and he assured us that the racks we chose would fit and the Thule J bars we did return would also work. As you can see by the photos 2 days later we were happy Kayakers.
Installation went pretty smoothly. The trick is to fully understand each step before moving to the next. There are a lot of small parts which at first was a little intimidating, but soon I was able to "get with it". I love the finished product and think you helped me get a good deal. Thank you for that
Installation was a little tricky but once the "feet" were attached to the roof and the bars properly spaced, everything wrapped up very well.
There is no noticeable wind noise with these installed.
See my review of the Inno Roof Rack of which this product is a part.
The Inno roof rack is an excellent product and etrailer.com provides exceptional service with videos, email, chat and phone. I bought this roof rack for my 2008 Ford Edge because because there is enough clearance for the moon roof. I use it to mount a 600W solar system for rustic camping instead of a noisy generator. I wish I'd taken a photo... I won't be mounting it again until mid-August 2024.
Worked like a charm. My daughter and I completed a 10K mile, 35 day camping trip around the USA.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.