Yakima SkyLine Roof Rack for Fixed Mounting Points - CoreBar Crossbars - Steel - Black - Qty 2
Item # Y99GB
Our Price: $618.80
Confirmed to Fit
2003 Ford Expedition
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (242)
- Q & A (0)
- Videos (56)
- Photos
Yakima Roof Rack - Y99GB
- Aero Bars
- Crossbars
- 50 Inch Bar Space
- Yakima
- Black
- 2 Bars
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Yakima CoreBars - 50" Long - Qty 2:- Aero-style, steel crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit
- Aerodynamic, teardrop shape helps to create a quiet roof rack system
- Controls air flow to significantly reduce wind noise and vibration
- Reduces drag to help maintain your fuel efficiency
- Full-length crossbars maximize space for clamp-on carriers and accessories
- Accommodate most universal-mount bike, water, snow, and cargo carriers
- Easy installation on Yakima towers with included brackets and hardware
- Works with BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Roll-formed, galvanized steel bars are extremely strong and durable
- Black vinyl coating protects the bars from corrosion
- Plastic endcaps help to keep water and debris out of bars
Yakima Landing Pad 1 Fit Kit:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with C-shaped factory rack tracks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000221 Landing Pad 1 for Yakima Control or Sky Line Towers
8000421 Yakima Core Bar Cross Bars - Steel - Aero Profile - 50" Long - Qty 2
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Yakima SkyLine Roof Rack for Fixed Mounting Points - CoreBar Crossbars - Steel - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Crossbars SkyLine Towers Review
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Customer Reviews
Yakima SkyLine Roof Rack for Fixed Mounting Points - CoreBar Crossbars - Steel - Black - Qty 2 - Y99GB
Average Customer Rating: 4.8 out of 5 stars (242 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Bryan03/27/2024
Very nice and heavy duty. They don’t look too fragile on a lifted truck with oversized tires.
by: Cody05/25/2023
2017 Toyota Camry
I've just recently installed this setup on my 2015 Toyota Camry.
etrailer - Shopping for this rack was fairly simple, and the shipping from etrailer was quick and reliable. I received the rack in 2 different shipments but they both arrived at the same time. etrailer made sure the all the contents were available. They also have several resourceful videos on their YouTube page, which was helpful while shopping for the rack and during a few trouble shooting items while I was installing.
Yakima Core Bar - Overall a quality product. Everything necessary was supplied, including a handy measuring tape and some very well written instructions. The fit is clean and very sturdy. The only qualm I have is that the hex hole in the large anchor bolts are a bit larger than the supplied hex driver. Toward the end of the installation, the tool was worn and ended up turning inside the bolt itself (not due to over torquing whatsoever). I ended up having to use a hex set I had in my toolbox to complete the installation because the provided tool was starting to strip out the anchor bolt. With that said, the kit is still a great kit that meets my expectations.
Wind noise is quieter than my OEM VW bars on my 2017 Volkswagen GTI. It's noticeable, but nothing extreme - I believe that's just the price you pay when adding crossbars to a vehicle.
Verdict - etrailer has definitely met my expectations, and the Yakima kit provided is a well designed kit that fits well!
by: Frank P.03/06/2016
Fit good with the OE track on roof. I like the new covers they supplied with the mounts.
by: Howard11/09/2023
2019 Hyundai Santa Fe
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
by: Nelson06/26/2023
Ford
It was what it was advertised and fit perfectly on my 2023 Ford Maverick
by: Rob04/19/2023
Honestly, I love etrailer. I love the expert help that you all provide. It's clear by the 1 year follow-ups that you care more about the relationships with your customers then just making a sale. Your service is friendly, informative and fast. I always come here first to look for my next purchase. Thanks again-Rob.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Laura 04/01/2024
As described! Quick delivery!
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Jerry 07/29/2023
I have ordered several times from Etrailer and have always received efficient, timely and reasonable shipped items. Did not use customer service with this order but it has always been good.
by: Pat G08/29/2013
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
by: Aaron 02/10/2024
Perfect match
by: Ric 07/22/2023
Honestly went back to etrailer after buying something i couldnt find on the big A before because their support was so good and delivery speed was soo fast.
by: Matt 01/02/2024
Great product great service
by: Axl01/02/2017
Very good product. The Yakama towers and cross bars feel very solid and appears to be high quality. Very easy install. Others have complained about the instructions, but guess I'm a visual person because the pictures all seemed very clear to me and the install was very easy. They do sit higher than I expected. After adding a Rhino Rack cargo basket, we only have about 4-5" clearance below the garage door.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: William 01/11/2024
Shipment received, as ordered! Thanks again to Bryce D., for assistance.
by: Lisa04/12/2019
Honda Ridgeline
These crossbars feel like they are well made and sturdy. It took less than 30 minutes to install with the Ridgeline Towers. I love the look of the bars! Can't wait to load the Kayaks up and get out on the water.
by: Brad G02/04/2023
I ordered a Yakima roof rack system here and it was easy to find what I needed for parts to install on my truck cap. Very solid product and this company ships quickly every time I've ordered from them
by: See11/03/2022
with so many variables having someone that could sort through all them was very helpful Thanks etrailer
by: Adam K05/14/2023
Should include extra end caps just in case they fall off.
by: Rafael07/03/2020
Roof rack fits and works as advertised. Over the phone customer support for sales and install directions were very helpful and thorough. Geoff is an excellent brand ambassador who goes above and beyond to fulfill customer expectations. I will definitely be shopping at etrailer for my future vehicle needs. Well done!
by: Phil04/27/2018
2015 Toyota 4Runner
Timely delivery of my order, as usual! Easy to install on my 2015 4Runner. After I had the mounts ready and put on both bars, I installed the front one and fine-tuned it, the second took even less time then. I now have the ability to carry up to 3 kayaks, perfect! etrailer is a great company!
25
519
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Can the Thule Hullavator Pro Kayak Carrier Be Used With Yakima CoreBar CrossbarsYes, you can mount the Thule Hullavator Pro Kayak Carrier # TH898 on Yakima CoreBars like the Yakima CoreBar Crossbars # Y00421. The Thule Hullavator Pro Kayak Carrier # TH898 can be mounted using the clamps or in crossbar channels. Just keep in mind that to use the Hullavator, your crossbars need to extend 4"-8" beyond your roof rack feet.
view full answer... - Recommended Roof Rack, Kayak Carrier, & Roof Bike Rack For 2017 Hyundai TucsonYes, I will be happy to help with bike and kayak carrier recommendations that will fit your Yakima CoreBar Crossbars # Y00421, RidgeLine Towers for Yakima Crossbars # Y00145, RidgeClip Fit Kit for Yakima RidgeLine Roof Rack Towers # Y06017 on your 2017 Hyundai Tucson. Yakima JayLow Kayak Carrier w/ Tie-Downs J-Style or Post Style # Y04073 will work with your Yakima roof rack with no adapter needed. The maximum crossbar dimensions are 3-1/2" x 1-11/16" and the minimum crossbar spread is...
view full answer... - Roof Rack Recommendation for a 2019 Chevy SparkThe Rhino-Rack Roof Rack fits your 2019 Chevrolet Spark with a naked roof. The roof rack includes: Rhino-Rack Vortex Aero Crossbars # RRVA106B-2, Rhino-Rack 2500 Series Legs # RRRLKVA and Custom DK Fit Kit # DK465. This roof rack has a weight capacity of 165 lbs. If you have raised side rails that run front to back you can use the Yakima Roof Rack with Yakima CoreBar Crossbars # Y00421 and TimberLine Towers for Yakima Crossbars # Y33TR. This system has a weight capacity of 220 lbs. Even...
view full answer... - Can Two Thule Hullavator Kayak Carriers Be Used On a 2019 Subaru Outback WagonIn order to use a Thule Hullavator Pro Kayak Carrier part # TH898 on a 2019 Subaru Outback Wagon you will need to install an aftermarket crossbar system as the factory crossbar system doesn't have the required overhang needed. That said, you'd only be able to install one Hullavator on the roof as two would require a very large crossbar and this is not recommended by Thule anyway. Therefore, you'd need a different carrier for the other kayak and for this I recommend the etrailer J-Style...
view full answer... - Difference Between Yakima CoreBar and JetStream Roof Rack CrossbarsThere are a couple of differences between the two. The JetStream bars like # Y00425 are made of extruded aluminum while the CoreBars such as the # Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has a higher capacity. The primary difference is that the JetStream bars feature the T-Slot channel at the top that allows quick and easy accessory installation, while accessories used with the CoreBars would need to clamp around the crossbar. The...
view full answer... - Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked RoofRola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
view full answer... - Parts Needed to Install Yakima Roof Rack on 2017 Subaru Outback WagonYes, the Landing Pad 15 # Y00241 is the correct Landing Pad for a 2017 Subaru Outback Wagon with flush mounted roof rails. For a round bar roof rack you would need these part numbers # Y00408, # Y53TR, # Y03536, and # Y00241. For an aero bar roof rack you would need the # Y00421, # Y53TR, and # Y00241. Aero bars provide better fuel mileage and less wind noise.
view full answer... - Yakima Roof Rack Fitment For A 2001 Toyota 4Runner Since the rack he has is for raised rails and the crossbars are only 38" in length you wouldn't be able to use any of the components and would need a completely new rack. A 2002 Toyota 4Runner has a minimum bar length of 48" so for a round bar setup on a naked roof you would need the following components: Yakima RoundBar Crossbars # Y00408 BaseLine Towers for Yakima Crossbars # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06171 If you'd...
view full answer... - Roof Rack to Fit a 2018 Toyota Tacoma with Fixed Mounting PointsIf you definitely want a Yakima roof rack then the clamp-style attachment is all that is available at this time. For their system I recommend CoreBar system using BaseLine towers # Y28TR, fit kits # Y06145 and # Y06128, and then either the 50 inch, part # Y00421, or 60 inch, part # Y00422, crossbars. Since your 2018 Toyota Tacoma has the fixed mounting points there are Rhino-Rack systems that fit. I recommend the Vortex Aero bars, part # RRVA126B-2, with # RRRLT600 legs, and # RRQMFK08-2...
view full answer... - Is The Yakima Crossbar Weight Limit Dynamic Or Static, What Roof Rack Do You Recommend For A Mazda 3The weight limit of the crossbar is a dynamic weight limit. It is also independent of the rack itself. For example, on your 2021 Mazda 3, the Yakima roof rack has a weight limit of 125 lbs. The maximum weight limit of your roof rack is based on the part of the system with the lowest weight rating. In this case, it is your 2021 Mazda 3's roof that lowers the weight capacity. My recommended roof rack for your Mazda 3 will consist of the following items: Yakima CoreBar Crossbars - Steel -...
view full answer... - Canoe Carrier Recommendation for a 2017 Jeep Grand CherokeeThanks for your kind words! For a great carrier for a 16' canoe on your 2017 Jeep Grand Cherokee Trailhawk, I recommend using the Yakima KeelOver Canoe Carrier # Y04069. The KeelOver comes with a simple, tool free installation onto your crossbars and already includes all the straps you need to secure your canoe. For your canoe length, you will be able to adjust your crossbars to the required spread of 30" apart. As far as crossbar compatibility, the KeelOver clamps around crossbars that...
view full answer... - Buying ONLY The Yakima Landing Pad 19 For A 2017 Cadillac XT5Yes, if you bought the part # Y00245 that will come with just the landing pad! If you have all the other Yakima components # Y00421 and # Y53TR you will be good to install! Check and see if you have I've included an install video for you!
view full answer... - Recommended Roof Rack for 2015 VW Golf SportWagen and Compatible Roof BoxFor your 2015 VW Golf SportWagen, I recommend the Yakima CoreBar Crossbars - 50" Long # Y00421 and the TimberLine Towers # Y33TR. You will also want the lock cores # Y07204 to secure your investment. This will give you a crossbar spread of 46 inches maximum and the rack has a load capacity of 165 lbs. This will allow any of the Yakima roof boxes to fit your vehicle, the largest of which is the Yakima SkyBox 21 Rooftop Cargo Box # Y07337. I've linked the page to all of your options listed...
view full answer... - Roof Rack Recommended for Carrying Kayak on 2018 Chevrolet VoltWe do indeed have a roof rack and a kayak carrying solution for your 2018 Chevy Volt. I'd recommend a Yakima CoreBar roof rack, which can be assembled from the following parts: • Yakima 50 Inch CoreBar Crossbars, part # Y00421 • Yakima BaseLine Towers, part # Y28TR • Roof Rack Fit Clips # Y06137 • Roof Rack Fit Clips # Y06126 Yakima makes a high-quality product that's very highly rated by our customers. The rack would provide you with many years of trouble-free service. For a kayak carrier,...
view full answer... - Can the RockyMounts LiftOp Biggie Ski and Snowboard Carrier Be Locked To Yakima Aero CrossbarsYes, the RockyMounts LiftOp Biggie Ski and Snowboard Carrier part # RKY1482 comes with locks for both the skis/boards and rack. Therefore, you can lock both the skis/snowboards inside the carrier and the carrier to the roof rack. The RockyMounts LiftOp will also work just fine with both aero crossbars, the Yakima JetStream Crossbars like part # Y00425 and Yakima CoreBar Crossbars like part # Y00421 for example.
view full answer... - Inno Fork Mount Bike Rack Compatibility with Yakima Roof Rack Crossbar T-Slot ChannelYes, the Inno Fork Lock Roof Bike Rack - Fork Mount - Channel Mounted - Aluminum # INXA391 has t-bolts that are compatible with Yakima aero bars like the JetStream # Y00426 that have the t-slot channel on top for a clean looking install. If you have the Yakima CoreBar crossbar like # Y00421 then they are not compatible because those aero bars don't have the top channel T-Slot.
view full answer... - How to Transport 4 Bikes on a 2012 Hyundai AccentThere are a lot of great options for bike carriers for use with your 2012 Hyundai Accent, but the only 4-bike carriers available for your vehicle are hitch-mounted carriers which require Class II or Class III hitches and the only hitches available to fit on your vehicle are Class I. Instead, I recommend using a hitch-mounted bike rack such as the Thule Camber 2 Bike Rack # TH9058 for two of your bikes and a roof-mounted bike rack such as the Rhino-Rack Road Warrior Rooftop Bike Carrier...
view full answer... - Fitting a Thule Ski/Snow Board Carrier to Yakima CoreBar CrossbarsWithout knowing what Thule Ski/board rack you have, it is a little more difficult to ensure you have the proper clamps. If you have the Thule SnowPack Ski and Snowboard Carrier # TH7326 you were looking at, they would already be compatible with the Yakima CoreBar Crossbars like # Y00421. The Yakima CoreBar Crossbars # Y00421 are an aero-style crossbar, which the Thule SnowPack Ski and Snowboard Carrier # TH7326 is already designed for use with aero bars. If you have a different ski/board...
view full answer... - Recommended Roof Rack For My 2015 Chevrolet CruzeI do have a roof rack that will fit your 2015 Chevrolet Cruze, but your Malone roof rack will not fit your vehicle. My roof rack recommendation will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2, part # Y00421 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06127 Yakima Same Key...
view full answer... - What Fixed Point Roof Rack Do You Recommend For My 2016 Kia SoulWe do offer fixed point roof rack options for your 2016 Kia Soul. If you choose the "without Panoramic Glass" option, you will see a flush mounted rail option. That is the fixed point option. I recommend the Yakima offering because the new Yakima tower have a pitch adjustment that keeps the front and rear crossbars level. It consists of the following: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2, part # Y00421, SkyLine Towers for Yakima Crossbars - Fixed Mounting Points,...
view full answer... - Roof Rack Kit for a 2008 GMC Yukon XL DenaliThere is a fit available for the 2008 GMC Yukon XL Denali, consisting of the following base kit: Yakima JetStream Towers, 50 Inches, part # Y00425 Yakima SkyLine Towers, part # Y53TR Yakima Landing Pad 20, part # Y00246 You also have the option switching the JetStream Towers for either the 50 inch CoreBar, part # Y00421 which removes the c-channel from the JetStream or 58 inch round bars, part # Y00409 with SL Adapter, part # Y03536.
view full answer... - Will 2 Kayaks on the Rhino-Rack J-Style Carriers Fit a 2008 Lincoln NavigatorI'm pretty sure you're going to be just fine fitting 2 kayaks on top of your 2008 Lincoln Navigator with 2 of the Rhino-Rack J-Style Kayak Carrier # S510. If you check out the various photos sent in by others who have used this carrier you can see that there are much smaller vehicles fitting 2 of them, like the Dodge Journey or the Ford Taurus. If you don't already have a roof rack on your 2008 Lincoln Navigator then I recommend the Yakima CoreBar System which uses the 50" Long Bars #...
view full answer... - Parts Needed To Carry a Canoe With Yakima CoreBar Roof RackThe design for the Yakima CoreBar Crossbars # Y00421 will not allow for a traditional Load Stops # 753-3761 that are designed to fit in a track type channel. If you wanted to carry a canoe with your CoreBar the Yakima SweetRoll # Y04074 uses saddles to support the canoe above the bars. If you feel switching your crossbars is the best option for being able to use load stops, please let me know what vehicle and roof rack you have so I can ensure you get the right crossbars to fit your towers...
view full answer... - Will the SportRack Semi-Custom Roof Rack Fit a 2018 Elantra GT Hatchback Bare Roof?I have a great solution for you. Unfortunately, the SportRack Semi-Custom Roof Rack for Naked Roofs # SR1002 will not fit your 2018 Hyundai Elantra GT. However, for a roof rack system that does fit for your Hyundai Elantra GT, I recommend the following parts: - Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 # Y00421 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06175 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06159 This setup...
view full answer... - What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
view full answer...
- Can I Use The Thule Hullavator On Factory Crossbars With No Overhang?The Thule Hullavator # TH898 will require crossbars that overhang the towers by 4' - 8". There is not any kind of adapter that is made for this purpose. Your best bet will be to replace the factory crossbars with aftermarket crossbars that have some overhang. Since your 2023 Subaru Outback already has the factory installed rails running front to back, you will be able to mount crossbars using these rails. I recommend the Yakima JetStream Roof Rack, which will consist of the following parts: Yakima...
view full answer... - Roof Rack for 2012 Ford Transit Connect with Longer CrossbarsThe longest crossbar roof rack we have for your 2012 Ford Transit Connect is the Yakima Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which comes with a similar square HD crossbar to the Rhino Rack you mentioned. This rack will give you 55 inch crossbars.
view full answer... - Load Assist Kayak Carrier for 2012 Hyundai Sante Fe With Factory Roof RackI have a couple solutions for you but the Thule Hullavator # TH898 will not work with your factory roof rack on your 2012 Hyundai Sante Fe. The carrier requires 4"-8" of crossbar overhang from the support tower. This is to provide enough clearance for the lift assist to clear the side of your 2012 Hyundai Sante Fe. You can swap out your factory roof rack for a roof rack system that has an overhang that will work with the carrier. The Yakima Jetstream Roof Rack could get you the overhang...
view full answer... - Can the Yakima HardTop SL Roof Rack Be Obtained With 60 TracksCorrect, the kits are only offered with tracks up to 54" long but you can still piece together your own kit with the longer 60" tracks which I have attached for you below. Yakima 60" Tracks for Roof Racks part # Y01135 Landing Pad 1 for Yakima Control Towers part # Y00221 (2) Yakima CoreBar Crossbars part # Y00422 SkyLine Towers for Yakima Crossbars part # Y53TR
view full answer... - Which Yakima Towers Are the Landing Pad 23 Compatible WithThe Landing Pad 23 for Yakima SkyLine and Control Towers - Qty 4 # Y98FR are only compatible with Yakima SkyLine Towers for Yakima Crossbars # Y53TR and the older Yakima Control Towers like the Replacement Yakima Control Tower for Factory-installed Tracks (QTY 1) # Y8890027. If you've got a different model tower than either one of those, you'll need to replace the towers in order to use the # Y98FR landing pads on your 2019 Toyota RAV4.
view full answer... - Recommended Roof Rack to Use Thule Hullavator # TH898 on a 2017 Jeep Grand CherokeeI'm so sorry to hear about your situation! From the looks of your previous crossbar order, you ordered the Thule AeroBlade Edge Roof Rack TH7602-TH7602. While we definitely have roof rack options for you to work with a Thule Hullavator # TH898, the AeroBlade Edge crossbars do not provide you the required 4-8 inches of crossbar overhang past the feet required for the Hullavator to function. This is because the AeroBlades do not extend past your rails. Judging that you purchased AeroBlades,...
view full answer... - Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
view full answer... - What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof RackFor your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
view full answer... - Can Two Thule Hullavator Kayak Carriers Be Used On a 2019 Subaru Outback WagonIn order to use a Thule Hullavator Pro Kayak Carrier part # TH898 on a 2019 Subaru Outback Wagon you will need to install an aftermarket crossbar system as the factory crossbar system doesn't have the required overhang needed. That said, you'd only be able to install one Hullavator on the roof as two would require a very large crossbar and this is not recommended by Thule anyway. Therefore, you'd need a different carrier for the other kayak and for this I recommend the etrailer J-Style...
view full answer... - Will Two Bikes and a Kayak Fit on a 2019 Subaru Forester Factory Roof RackIf you were to upgrade to an aftermarket roof rack then I believe you would be able to fit two bikes and a kayak on top of your 2019 Subaru Forester but not with the factory roof rack. In order to upgrade, I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y53TR, and part # Y00248 which actually replaces the factory roof rack. The Yakima JayLow Kayak Carrier part # Y04073 along with two of the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 would then allow...
view full answer... - Parts Needed to Install Yakima Roof Rack on 2017 Subaru Outback WagonYes, the Landing Pad 15 # Y00241 is the correct Landing Pad for a 2017 Subaru Outback Wagon with flush mounted roof rails. For a round bar roof rack you would need these part numbers # Y00408, # Y53TR, # Y03536, and # Y00241. For an aero bar roof rack you would need the # Y00421, # Y53TR, and # Y00241. Aero bars provide better fuel mileage and less wind noise.
view full answer... - Recommended Platform Rack and Crossbars for a 2022 Toyota HighlanderTo be able to mount the Yakima LockNLoad platform rack to your 2022 Toyota Highlander you're going to need to add a set of crossbars with the Yakima JetStream Crossbars # Y00425, and the SkyLine Towers for Yakima Crossbars # Y53TR, and the Landing Pad 28 for Yakima SkyLine And Control Towers # Y66VR. I know you mentioned you have OEM crossbars, but most of the time people get roof rails and crossbars mixed or they use them interchangeably when they are not the same. If you do actually...
view full answer... - Parts Needed to Add Yakima LockNLoad to Thule TracksYes, to add the Yakima LockNLoad Platform Roof Tray # Y05048 to Thule tracks you'll need to order three of the Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221, the SkyLine Towers # Y53TR, the SkyLine Towers # Y72TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-3.
view full answer... - Can I Fit Four Pair Of J-Style Carriers On Top Of My 2013 GMC Yukon?You could possibly fit four of the # S65148 on your roof but it will be a pain to load majority of your kayaks up there. There is a better solution I found that will be more user friendly. You are going to need a large roof rack bar to accommodate your 4 kayaks. I suggest the Yakima 60" HD Bars # Y01157 and If you have factory side rails you will need the Yakima SkyLine Towers # Y53TR along with the Side Rail Adapter # Y03541 and Landing Pad # Y00221. If you have factory raised rails...
view full answer... - Is The Yakima Crossbar Weight Limit Dynamic Or Static, What Roof Rack Do You Recommend For A Mazda 3The weight limit of the crossbar is a dynamic weight limit. It is also independent of the rack itself. For example, on your 2021 Mazda 3, the Yakima roof rack has a weight limit of 125 lbs. The maximum weight limit of your roof rack is based on the part of the system with the lowest weight rating. In this case, it is your 2021 Mazda 3's roof that lowers the weight capacity. My recommended roof rack for your Mazda 3 will consist of the following items: Yakima CoreBar Crossbars - Steel -...
view full answer... - Canoe Carrier Recommendation for a 2017 Jeep Grand CherokeeThanks for your kind words! For a great carrier for a 16' canoe on your 2017 Jeep Grand Cherokee Trailhawk, I recommend using the Yakima KeelOver Canoe Carrier # Y04069. The KeelOver comes with a simple, tool free installation onto your crossbars and already includes all the straps you need to secure your canoe. For your canoe length, you will be able to adjust your crossbars to the required spread of 30" apart. As far as crossbar compatibility, the KeelOver clamps around crossbars that...
view full answer... - Length of Crossbars Needed on ARE Cap for Thule Hullavator & Motion XT Cargo BoxYou can mount the Thule Motion XT Rooftop Cargo Box # TH629806 and Thule Hullavator Pro Kayak Carrier # TH898 on your Tacoma's ARE truck cap with Yakima tracks, but the 60 inch bars aren't wide enough. The Motion XT is 36" wide and the Hullavator takes up 28-1/2" of crossbar space so there isn't quite enough room for both to fit comfortably. What you will need instead are the 70" crossbars, the Yakima JetStream Crossbars 70" Long - # Y00427. Since you already have the tracks, the other...
view full answer... - Carrying A Yakima LockNLoad Platform On 2007 Chevy SuburbanThe Yakima LockNLoad Platform Roof Tray - Aluminum - 84" Long x 54" Wide, part # Y05048, needs a roof rack in order to attach to your 2007 Chevy Suburban. Your vehicle's roof either has raised rails or fixed points, so it has two separate roof rack fits. Each option has a maximum weight limit of 165lbs. Please keep this in mind because the weight of the rack and the accessories are part of the maximum weight limit and the LockNLoad Platform weighs 70lbs and the roof rack will weigh approximately...
view full answer... - Yakima HD Bar Roof Rack For A 2022 Lexus GX 460 With Factory Raised Rails And Fixed Mounting PointsYes, you certainly can use the fixed mounting points on the factory rails of your 2022 Lexus GX 460 to mount Yakima HD crossbars. To do so you will need the following parts; Crossbars - Yakima HD 55" # Y01156 Towers - Yakima Skyline # Y53TR HD Bar Adapter # Y03541 Landing Pad # Y25ZR The 55" HD bar will have minimal overhang on a 2022 Lexus GX 460. it will have a very nice clean, factory look once installed.
view full answer... - How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback WagonThe Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
view full answer... - Yakima Towers Needed to Mount to Landing Pad 1 on Track SystemIt looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
view full answer...
- Buying ONLY The Yakima Landing Pad 19 For A 2017 Cadillac XT5Yes, if you bought the part # Y00245 that will come with just the landing pad! If you have all the other Yakima components # Y00421 and # Y53TR you will be good to install! Check and see if you have I've included an install video for you!
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer...
- Replacement Anchor Plates For A Yakima Bar SystemWhen it comes to replacement Anchor Plates # Y8810074 it replaces the 8 threaded anchor plates for the Yakima LandingPad 1 # Y00221 which works with the Yakima SkyLine and Control Towers. Per Yakima It will not fit the Yakima HD bars.
view full answer... - Roof Rack Recommendation for 2022 Mercedes Benz Sprinter 2500 High RoofYes we have the Yakima HD roof rack that fits your 2022 Mercedes-Benz Sprinter 2500 with part numbers # Y01158, # Y00148, # Y03541, and # Y00221. What's great about this rack is that it has a much higher weight capacity, is still aerodynamic shaped, and also has a lifetime warranty.
view full answer... - Can the Yakima HardTop SL Roof Rack Be Obtained With 60 TracksCorrect, the kits are only offered with tracks up to 54" long but you can still piece together your own kit with the longer 60" tracks which I have attached for you below. Yakima 60" Tracks for Roof Racks part # Y01135 Landing Pad 1 for Yakima Control Towers part # Y00221 (2) Yakima CoreBar Crossbars part # Y00422 SkyLine Towers for Yakima Crossbars part # Y53TR
view full answer... - Will Yakima Roof Rack Fit Thule Roof Rack Top ChannelsThe landing pad you would need is part # Y00221 which will fit Thule roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409.
view full answer... - Parts Needed to Add Yakima LockNLoad to Thule TracksYes, to add the Yakima LockNLoad Platform Roof Tray # Y05048 to Thule tracks you'll need to order three of the Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221, the SkyLine Towers # Y53TR, the SkyLine Towers # Y72TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-3.
view full answer... - What Crossbar System Accommodates a Rooftop Tent on My 2017 Honda Accord? For your 2017 Honda Accord with a bare roof without fixed mounting points, the best option is a system that involves drilling. This is because all of the non-drilling options for your vehicle include door jamb clamps that are not recommended for supporting the extra weight associated with a roof top tent setup. Manufacturers strongly discourage this because door jamb clamps setups can buckle and become detached with the weight. With that being said, I recommend the following track system:...
view full answer... - Parts Needed to Install Yakima Round Bar Roof on 2001 Toyota 4Runner with Roof TracksThanks for the pictures of your rack. You have a Yakima Round Bar setup that has been updated so while you'd be able to reuse your roundbars on your 2001 Toyota 4Runner you'd need a new set of feet and fit kit. For that you'd need the SkyLine Towers for Yakima Crossbars # Y00148 Landing Pad 1 # Y00221 RoundBar adapter part # Y03536 You already have the roundbars but for that you'd normally use the part # Y00409
view full answer...
- Roof Rack that Can Fit Tracks of Pace Edwards UltraGroove for 2022 Ford F-250The Pace Edward UltraGroove Tonneau cover part # PE87QJ for your 2022 Ford F-250 long bed has tracks that are basically the same as the tracks on campers that were designed for roof racks. To add a set of crossbars to these tracks I recommend the Yakima 60 inch JetStream Bars # Y00426 along with the Landing Pad # Y00221 and Towers # Y00148 to attach them to the tracks. This will give you a set of aero shaped bars that are very high quality and quiet that also have channels on the top of...
view full answer... - Length of Crossbars Needed on ARE Cap for Thule Hullavator & Motion XT Cargo BoxYou can mount the Thule Motion XT Rooftop Cargo Box # TH629806 and Thule Hullavator Pro Kayak Carrier # TH898 on your Tacoma's ARE truck cap with Yakima tracks, but the 60 inch bars aren't wide enough. The Motion XT is 36" wide and the Hullavator takes up 28-1/2" of crossbar space so there isn't quite enough room for both to fit comfortably. What you will need instead are the 70" crossbars, the Yakima JetStream Crossbars 70" Long - # Y00427. Since you already have the tracks, the other...
view full answer... - Carrying A Yakima LockNLoad Platform On 2007 Chevy SuburbanThe Yakima LockNLoad Platform Roof Tray - Aluminum - 84" Long x 54" Wide, part # Y05048, needs a roof rack in order to attach to your 2007 Chevy Suburban. Your vehicle's roof either has raised rails or fixed points, so it has two separate roof rack fits. Each option has a maximum weight limit of 165lbs. Please keep this in mind because the weight of the rack and the accessories are part of the maximum weight limit and the LockNLoad Platform weighs 70lbs and the roof rack will weigh approximately...
view full answer... - Yakima Towers Needed to Mount to Landing Pad 1 on Track SystemIt looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
view full answer... - Could Yakima Round Bar Roof Rack Fit into Rola Roof Track 59855Yes, you can fit Yakima round bar roof racks into the Rola tracks you mentioned. The track dimensions of this are the same as what Yakima roof rack components require. To do that you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411.
view full answer... - How To Install Roof Platform Tray On a 2018 Nissan NV 2500 High RoofI do have an option to install a platform tray on top of a 2018 Nissan NV 2500 High Roof but there are no options through Rhino Rack currently. Instead, you'd need to first install a Yakima Roof Rack part # Y01158, part # Y03541, part # Y53TR, part # Y00221. Then you could use this to install a Yakima Platform Trap part # Y05046 and part # Y05039 (2). In regards to modifying the platform, I could not recommend this.
view full answer... - What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof? We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
view full answer...
- How to Install Yakima Skyline Tower Setup on CamperThe only way to install a Yakima Skyline tower setup on a camper like what you have will require installing a set of tracks on the roof first like with the part # Y01135. If you have the clearance for the 60 inch long tracks, then the Yakima tracks will mount to your camper. You will need to use the SkyLine Towers, # Y00148, to attach any of the Yakima crossbars to the track system. Also, the Yakima Landing Pad 1, # Y00221, is needed to attach the SkyLine towers to the track rack. The...
view full answer... - Recommended Track System for Cargo Platform on 2003 Toyota Tacoma with TopperThe Yakima 60" Tracks for Roof Racks # Y01135 will work well on a sheet metal roof. You will want to be as close to the frame weight supports as possible to maximize the weight capacity. It sounds like you want to do a customized fit but I don't recommend running the track between the cab and topper. I'd use two separate tracks that are lined up so there is the ability to remove the topper if ever desired and you won't have the chance of an unsupported tower sitting in the gap between...
view full answer... - Yakima Tracks and Parts to Use Round Crossbars on 2020 Jeep Wrangler UnlimitedI'll be happy to help you out with the parts to add tracks to your 2020 Jeep Wrangler Unlimited! In addition to your Yakima round crossbars you'll need the following: 60" Tracks - # Y01135 (comes with mounting hardware) Legs - Control Tower # Y8890027 (you need 4) Landing Pad 1 - # Y00221 Lock Core Kit - # Y07204 (optional)
view full answer... - What Rooftop Basket and Roof Rack do You Recommend for My 2004 Toyota Tacoma Regular Cab?We have what you need! If you are looking for a great basket for your standard/regular cab 2004 Toyota Tacoma, I recommend using the SportRack Vista Roof Mounted Cargo Basket - Steel - 44" Long x 39-1/8" Wide # SR9035. This basket is large enough to provide you with the space you need on your roof, but small enough not to impede visibility out of your front windshield while driving. It is important to note, though, that in order to use this basket on your roof, you need to have at least...
view full answer... - What Parts Are Needed to Use a Roof Top Tent on a CX Truck CapTo use a roof top tent like the Yakima SkyRise HD Tent # Y07437 on your CX Truck Cap that only has tracks, you would need to add crossbars. The A.R.E toppers use either Yakima or Thule tracks. Both of those would be compatible with the Replacement Yakima Control Tower # Y8890027 (you would need to get 4), the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 (you would need to get 2) and the Round 66" CrossBars for Yakima Roof Rack System # Y00410.
view full answer... - Parts Needed To Attach Yakima Crossbars To A Pace Edwards Ultra Groove Tonneau CoverTo connect some Yakima crossbars to the T-Tracks of your Pace Edwards UltraGroove Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black # 311-KRTA10A38 you purchased you'll need the follow items: First you'll need two of the Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221. These will fit the T-Tracks of the cover and will give an attachment point for the feet of the crossbars. For the feet you'll need the SkyLine Towers for Yakima Crossbars - Fixed Mounting...
view full answer... - Landing Pads, Control Towers, and Round Crossbars for Yakima Roof Rack Tracks on a Pop Up CamperYes, if you use the Landing Pad 1 # Y00221 you will need to use Control Towers, # Y00214 (discontinued). This is a set of 4 feet so you will need to get 2 sets of the Landing Pads. Pop up campers, while generally small, can still be wide. The widest Yakima bars are 86 inches, # Y00420. If you need a different length there are also 78 inch bars, # Y00411, 66 inch bars # Y00410, 58 inch bars # Y00409, and 48 inch bars # Y00408.
view full answer... - Which Yakima Landing Pad Mount Kit Fits in Rhino Rack Roof Rack Channel like # RTC16Yes, we have test fit the Yakima Landing pad # Y00221 in a Rhino Rack channel like the part # RTC16 that you referenced and we found they fit perfectly. Since the RTV and RTC channel dimensions are the same that would mean that the Landing Pad fits both.
view full answer... - Yakima Roof Rack Recommendation for Cab and Camper Shell on 2022 Toyota TacomaFor a Yakima roof rack system on the cab and camper shell of your 2022 Toyota Tacoma I recommend going with the JetStream crossbars. I'll break down what parts you need for each section so it's easier to know what is paired together. Truck Cab 50" JetStream Bars - # Y00425 BaseLine Towers - # Y28TR BaseClip - # Y06145 BaseClip - # Y06128 Camper Shell 50" JetStream Bars - # Y00425 60" Tracks - Y01135 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you'll need 2 of these) I also recommend...
view full answer...
- Replacement Parts for Yakima Roof Rack Installed on 2011 Chevrolet Suburban with Roof TracksThe Yakima Replacement Hardware Kit # Y8890028 that you referenced is the correct one for use with their Landing Pad 1 for roof racks. The Yakima Landing Pad 1, part # Y00221, is the correct one for your 2011 Chevrolet Suburban with factory installed roof tracks. Please see the linked page.
view full answer... - Replacement Anchor Plates For A Yakima Bar SystemWhen it comes to replacement Anchor Plates # Y8810074 it replaces the 8 threaded anchor plates for the Yakima LandingPad 1 # Y00221 which works with the Yakima SkyLine and Control Towers. Per Yakima It will not fit the Yakima HD bars.
view full answer... - Roof Rack Recommendation for 2022 Mercedes Benz Sprinter 2500 High RoofYes we have the Yakima HD roof rack that fits your 2022 Mercedes-Benz Sprinter 2500 with part numbers # Y01158, # Y00148, # Y03541, and # Y00221. What's great about this rack is that it has a much higher weight capacity, is still aerodynamic shaped, and also has a lifetime warranty.
view full answer... - Can the Yakima HardTop SL Roof Rack Be Obtained With 60 TracksCorrect, the kits are only offered with tracks up to 54" long but you can still piece together your own kit with the longer 60" tracks which I have attached for you below. Yakima 60" Tracks for Roof Racks part # Y01135 Landing Pad 1 for Yakima Control Towers part # Y00221 (2) Yakima CoreBar Crossbars part # Y00422 SkyLine Towers for Yakima Crossbars part # Y53TR
view full answer... - Will Yakima Roof Rack Fit Thule Roof Rack Top ChannelsThe landing pad you would need is part # Y00221 which will fit Thule roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409.
view full answer... - Parts Needed to Add Yakima LockNLoad to Thule TracksYes, to add the Yakima LockNLoad Platform Roof Tray # Y05048 to Thule tracks you'll need to order three of the Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221, the SkyLine Towers # Y53TR, the SkyLine Towers # Y72TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-3.
view full answer... - What Crossbar System Accommodates a Rooftop Tent on My 2017 Honda Accord? For your 2017 Honda Accord with a bare roof without fixed mounting points, the best option is a system that involves drilling. This is because all of the non-drilling options for your vehicle include door jamb clamps that are not recommended for supporting the extra weight associated with a roof top tent setup. Manufacturers strongly discourage this because door jamb clamps setups can buckle and become detached with the weight. With that being said, I recommend the following track system:...
view full answer... - Parts Needed to Install Yakima Round Bar Roof on 2001 Toyota 4Runner with Roof TracksThanks for the pictures of your rack. You have a Yakima Round Bar setup that has been updated so while you'd be able to reuse your roundbars on your 2001 Toyota 4Runner you'd need a new set of feet and fit kit. For that you'd need the SkyLine Towers for Yakima Crossbars # Y00148 Landing Pad 1 # Y00221 RoundBar adapter part # Y03536 You already have the roundbars but for that you'd normally use the part # Y00409
view full answer... - Roof Rack that Can Fit Tracks of Pace Edwards UltraGroove for 2022 Ford F-250The Pace Edward UltraGroove Tonneau cover part # PE87QJ for your 2022 Ford F-250 long bed has tracks that are basically the same as the tracks on campers that were designed for roof racks. To add a set of crossbars to these tracks I recommend the Yakima 60 inch JetStream Bars # Y00426 along with the Landing Pad # Y00221 and Towers # Y00148 to attach them to the tracks. This will give you a set of aero shaped bars that are very high quality and quiet that also have channels on the top of...
view full answer... - Length of Crossbars Needed on ARE Cap for Thule Hullavator & Motion XT Cargo BoxYou can mount the Thule Motion XT Rooftop Cargo Box # TH629806 and Thule Hullavator Pro Kayak Carrier # TH898 on your Tacoma's ARE truck cap with Yakima tracks, but the 60 inch bars aren't wide enough. The Motion XT is 36" wide and the Hullavator takes up 28-1/2" of crossbar space so there isn't quite enough room for both to fit comfortably. What you will need instead are the 70" crossbars, the Yakima JetStream Crossbars 70" Long - # Y00427. Since you already have the tracks, the other...
view full answer... - Carrying A Yakima LockNLoad Platform On 2007 Chevy SuburbanThe Yakima LockNLoad Platform Roof Tray - Aluminum - 84" Long x 54" Wide, part # Y05048, needs a roof rack in order to attach to your 2007 Chevy Suburban. Your vehicle's roof either has raised rails or fixed points, so it has two separate roof rack fits. Each option has a maximum weight limit of 165lbs. Please keep this in mind because the weight of the rack and the accessories are part of the maximum weight limit and the LockNLoad Platform weighs 70lbs and the roof rack will weigh approximately...
view full answer... - Yakima Towers Needed to Mount to Landing Pad 1 on Track SystemIt looks like you have the Yakima Landing Pad 1 for Yakima Control Towers # Y00221 on your A.R.E. Canopy, so I recommend using the Skyline Towers for Yakima Crossbars # Y53TR. These towers will allow you to choose between the Jetstream # Y00426 (60" long) / # Y00427 (70" long), the Yakima CoreBar # Y00422 (60" long)/ # Y00423 or use Round bars like the Yakima # Y00410 with the adapter # Y03536. These towers are not compatible with square bars that you had asked about in a previous question. If...
view full answer... - Could Yakima Round Bar Roof Rack Fit into Rola Roof Track 59855Yes, you can fit Yakima round bar roof racks into the Rola tracks you mentioned. The track dimensions of this are the same as what Yakima roof rack components require. To do that you will need 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411.
view full answer... - How To Install Roof Platform Tray On a 2018 Nissan NV 2500 High RoofI do have an option to install a platform tray on top of a 2018 Nissan NV 2500 High Roof but there are no options through Rhino Rack currently. Instead, you'd need to first install a Yakima Roof Rack part # Y01158, part # Y03541, part # Y53TR, part # Y00221. Then you could use this to install a Yakima Platform Trap part # Y05046 and part # Y05039 (2). In regards to modifying the platform, I could not recommend this.
view full answer... - What Tracks and Crossbars do You Recommend for My 2009 Volkswagen Routan with a Naked Roof? We do have an option that will allow you to mount long crossbars on your roof with tracks. This application requires drilling. For that setup, I recommend the following parts: - Yakima 42" Tracks for Roof Racks # Y01126 - x4 of the Yakima Control Towers # Y8890027 - x2 of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - Round 58" CrossBars for Yakima Roof Rack System # Y00409 The Yakima RoundBar setup is compatible with most Thule cargo boxes and other branded cargo...
view full answer... - How to Install Yakima Skyline Tower Setup on CamperThe only way to install a Yakima Skyline tower setup on a camper like what you have will require installing a set of tracks on the roof first like with the part # Y01135. If you have the clearance for the 60 inch long tracks, then the Yakima tracks will mount to your camper. You will need to use the SkyLine Towers, # Y00148, to attach any of the Yakima crossbars to the track system. Also, the Yakima Landing Pad 1, # Y00221, is needed to attach the SkyLine towers to the track rack. The...
view full answer... - Recommended Track System for Cargo Platform on 2003 Toyota Tacoma with TopperThe Yakima 60" Tracks for Roof Racks # Y01135 will work well on a sheet metal roof. You will want to be as close to the frame weight supports as possible to maximize the weight capacity. It sounds like you want to do a customized fit but I don't recommend running the track between the cab and topper. I'd use two separate tracks that are lined up so there is the ability to remove the topper if ever desired and you won't have the chance of an unsupported tower sitting in the gap between...
view full answer... - Yakima Tracks and Parts to Use Round Crossbars on 2020 Jeep Wrangler UnlimitedI'll be happy to help you out with the parts to add tracks to your 2020 Jeep Wrangler Unlimited! In addition to your Yakima round crossbars you'll need the following: 60" Tracks - # Y01135 (comes with mounting hardware) Legs - Control Tower # Y8890027 (you need 4) Landing Pad 1 - # Y00221 Lock Core Kit - # Y07204 (optional)
view full answer... - What Rooftop Basket and Roof Rack do You Recommend for My 2004 Toyota Tacoma Regular Cab?We have what you need! If you are looking for a great basket for your standard/regular cab 2004 Toyota Tacoma, I recommend using the SportRack Vista Roof Mounted Cargo Basket - Steel - 44" Long x 39-1/8" Wide # SR9035. This basket is large enough to provide you with the space you need on your roof, but small enough not to impede visibility out of your front windshield while driving. It is important to note, though, that in order to use this basket on your roof, you need to have at least...
view full answer... - What Parts Are Needed to Use a Roof Top Tent on a CX Truck CapTo use a roof top tent like the Yakima SkyRise HD Tent # Y07437 on your CX Truck Cap that only has tracks, you would need to add crossbars. The A.R.E toppers use either Yakima or Thule tracks. Both of those would be compatible with the Replacement Yakima Control Tower # Y8890027 (you would need to get 4), the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 (you would need to get 2) and the Round 66" CrossBars for Yakima Roof Rack System # Y00410.
view full answer... - Parts Needed To Attach Yakima Crossbars To A Pace Edwards Ultra Groove Tonneau CoverTo connect some Yakima crossbars to the T-Tracks of your Pace Edwards UltraGroove Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black # 311-KRTA10A38 you purchased you'll need the follow items: First you'll need two of the Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221. These will fit the T-Tracks of the cover and will give an attachment point for the feet of the crossbars. For the feet you'll need the SkyLine Towers for Yakima Crossbars - Fixed Mounting...
view full answer... - Landing Pads, Control Towers, and Round Crossbars for Yakima Roof Rack Tracks on a Pop Up CamperYes, if you use the Landing Pad 1 # Y00221 you will need to use Control Towers, # Y00214 (discontinued). This is a set of 4 feet so you will need to get 2 sets of the Landing Pads. Pop up campers, while generally small, can still be wide. The widest Yakima bars are 86 inches, # Y00420. If you need a different length there are also 78 inch bars, # Y00411, 66 inch bars # Y00410, 58 inch bars # Y00409, and 48 inch bars # Y00408.
view full answer... - Which Yakima Landing Pad Mount Kit Fits in Rhino Rack Roof Rack Channel like # RTC16Yes, we have test fit the Yakima Landing pad # Y00221 in a Rhino Rack channel like the part # RTC16 that you referenced and we found they fit perfectly. Since the RTV and RTC channel dimensions are the same that would mean that the Landing Pad fits both.
view full answer... - Yakima Roof Rack Recommendation for Cab and Camper Shell on 2022 Toyota TacomaFor a Yakima roof rack system on the cab and camper shell of your 2022 Toyota Tacoma I recommend going with the JetStream crossbars. I'll break down what parts you need for each section so it's easier to know what is paired together. Truck Cab 50" JetStream Bars - # Y00425 BaseLine Towers - # Y28TR BaseClip - # Y06145 BaseClip - # Y06128 Camper Shell 50" JetStream Bars - # Y00425 60" Tracks - Y01135 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you'll need 2 of these) I also recommend...
view full answer... - Replacement Parts for Yakima Roof Rack Installed on 2011 Chevrolet Suburban with Roof TracksThe Yakima Replacement Hardware Kit # Y8890028 that you referenced is the correct one for use with their Landing Pad 1 for roof racks. The Yakima Landing Pad 1, part # Y00221, is the correct one for your 2011 Chevrolet Suburban with factory installed roof tracks. Please see the linked page.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.