19-1/8" Diameter x 2" deep, durable, steel, replacement fan is guaranteed to offer maximum full-time airflow and fit most OEM clutches.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna take a look at the Derale 19 inch belt-driven standard rotation clutch fan. Now this fan will offer maximum full-time airflow. This will serve as a replacement for the factory fan, has an eight hole design hub that fits most OEM fan clutches. This is constructed on a durable steel, has a nice black powder-coat finish to it and it is made in the USA. A few specs on this: the overall diameter from edge to edge is 19-and-one-eighths inches, total depth gonna be right about two inches deep, the blade pitch on this is 27 degrees. Now it does have a flange adjustability. In other words, bolting onto the flange, anywhere from two-and-three-eighth inches to two-and-nineteen-thirty seconds and this is a standard rotation fan and, basically, that means if you stand in the front of your car and look towards the back, this will rotate clockwise but that should do it for the review on the Derale 19 inch belt-driven standard rotation clutch fan..
Thanks
Never been let down when I needed a few parts.
Fast
Easy. Get some...
great use.
Perfect fit, works great.
Great product that no one else seemed to have. Shipped fast.
bought as a set with clutch hub , and was able to get my truck back on the road .
I am very pleased with the parts I received .
I use these fans to upgrade my mopars to a clutch fan. I use the hayden 2706 clutch with it. Keeps them running nice and cool. Both in country cruising and the city driving. Verify what size you need. Going bigger may hit the tranny lines. Keep that in mind.
Cools very well! Took a half round file to fit the hub to the fan clutch. Not noticeable loud.
I had been searching for a 12 valve cummins replacement fan for a fee months and found this one noted on a forum. The stock fans are discontinued and junk yards around here want rediculous prices for them. With a little bit of die grinding (could have been done in a few minutes with a round file) it fit right over the dodge cummins clutch. Couldn't be happier. Fits perfect and saved me a large chunk of money. Thanks Derale for making a fan to fit.
This replacement clutch type radiator fan is of very good quality and was a good fit after a couple of minutes of using a round file to slightly bevel the edge where it fits onto the thermal clutch. Making that very simple adjustment was a 'no brainer' not even requiring
the fan to be secured in a vise. I give the product a strong five stars.
I bought a fan for my 84 bronco 2. It fit perfect and the service was great. I was reluctant to buy from e.trailer because I had never heard of them but I decided to go ahead and try them this time and I am glad I did. I recommend them highly.
Had concerns about the smaller diameter. But have not had any cooling issues. Fit and clearances were good. Took forever to get it.
I originally ordered this from two other big name brand stores who stated it would be a month before they could send it out. Both companies emailed me that they cancelled my order because they could not deliver what they listed they had and would ship the middle of this month. I found the 17” fan for a clutch fan on etrailer who shipped it the next day after I ordered it and got it within 4 days. Great place to do business with. I will be doing business with them on parts for my ‘55 Chevy. And the price was better than the two would emailed me of the cancellation.
Well constructed from heavy material. Much higher quality than the chinese crap i looked at in the auto parts store. As expected it is a little more noisy than the stock fan, but it provides a ton more air flow. So far om very happy with this product.
Overall great product, this application was to replace the factory 19.25" fan one a Ford F-350 with the 7.5 liter gas engine, it required shifting the fan shroud over 1/4" to allow for blade clearance, pulls more air than the factory 5 blade did and does with with less noise and engine strain. highly recommend this unit as a replacement for OEM fans.
This fan for my Dodge truck was very hard to find. I came across etrailer.com and the picture and decription of it was what I needed. I got it very quickly and it was a perfect fit for my old fan clutch. It showed the right way the fan was suppose to turn. Installed it and now my truck is back on the road. Great fan and great price. I was very satisfied about the whole experience starting from the very nice sales lady that took my infomation.I would highly recommend etrailer.com to anyone looking for great products at great prices. 5 stars
It’s perfect, just what we were looking for.
Price and shipping spot on!
This is a very good product, the quality of the metal, the accuracy of the riveting, and the OEM-like finish are impressive. The fan fit to the clutch with almost zero tolerance, and (as near as I sound measure on my workbench) perfect balance.
Thanks for the fast shipping, especially during the holidays.
Do you have a question about this Radiator Fan?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.