Video Transcript for An In-Depth Look at the Phoenix Faucets Catalina RV Bathroom Faucet

Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a look at this Phoenix Faucets Catalina RV bathroom faucet. This Catalina Series faucet is going to let you upgrade your bathroom faucet in your RV or camper using the inlet shanks with the standard male NPSM connections. You're just gonna drop this new faucet in place through the mounting holes of your existing faucet. This is a two-hole installation and then you're just going to tighten down the included mounting hardware.

And then finally, connect the hot and cold water lines. The use of tub and tile caulk may be required, depending on your particular installation. If you do need that, the caulk does not come with this faucet. So, if you don't already have it, that would be a separate purchase for you. Now, this faucet features a dual handle design with lever style handles with one quarter turn cartridge stems that enable the faucet to fully turn on and off.

The washerless design reduces friction and daily wear for long-lasting durability. The low flow aerator is going to help conserve your water while you're soaping up your hands. The flow rate is 1.2 gallons per minute. And as you can see, this does feature this low arch spout with an oval base. Now, the distance from the countertop to the aerator is right at about 1 1/2 inches.

This is of a durable ABS plastic construction with this matte black finish and spin welded Celcon thermoplastic underbody. And I took some measurements earlier before our time together and I took those measurements just so you can be confident that this is going to work for you. Let's begin with the overall dimensions. The overall width, from the tip of the handle to the tip of the handle, we're sitting at about 9 1/2 inches wide. The overall height, we are sitting right at about 3 1/2 inches tall.

And then the overall depth, we are sitting right at about six inches deep. Now, looking at just the dimensions of the base itself, the width of this base is about 6 1/4 inches wide. And the depth of just the base, we're sitting at about 2 3/8 inches deep. And the spout length is right at about four inches long. Now, looking at our inlet shanks, the inner diameter is half an inch and the outer diameter is 13/16 of an inch. And the distance between our shanks, center to center is four inches and they're about two inches long. Instructions are included to walk you through the very simple installation process. And that's going to conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.