Video Transcript for Review of Utopia RV Faucets - Bathroom Faucet - UT93FR

Hello, neighbors, Steven here with etrailer.com. Let's take a look together at our Utopia RV Bathroom Vessel Sink Faucet. It's got a single lever handle, and it's in a nice matte black finish. So folks, this faucet will let you upgrade your Bathroom Vessel Sink Faucet in your RV camper or trailer to this single-style lever handle. As you can see, you can spin it hot or cold, and it is a lever handle. Let me spin this whole apparatus sideways, and hopefully, you can get a little better view.

There we go, from a side angle. And it has a disc inside, it's a maintenance-free ceramic disc cartridge. It creates a watertight seal when the faucet is turned off, and that's gonna help prevent dripping, leaks, those kinda things. And it is a high-rise spout, you can see it here, super tall. Overall, I got 12 3/16 inches tall all the way up to the top of the handle to the base.

I got on a width from the back of the spout to the front edge, I got 6 1/4 inches. And then just from the front face here out to the edge of the spout was 4 1/2 inches. So that'd be basically where it would be hitting the sink. Now, it is a durable, rustproof stainless steel construction with their matte black finish over top. It's what we call a one-hole installation.

Now, it does have what's called WaterSense, cUPC, and NSF61-9 compliancy. And it's a simple installation, you do need to get some tile or tub caulk sold separately. And it has a flow rate of 2.2 gallons per minute. So like I said, a simple installation, folks. If you've never installed something like this, if you're not comfortable, that's fine.

Call a local plumber, hand it to him and whatnot. You pretty simply. I'm gonna uninstall, so I'm gonna go backwards. But there's a metal nut here, it's like a retainer nut, and then a couple washers that all come off, and they just come right out of here really simply. And then you just have a long threaded hole. So when you install this, that caulking is going underneath here, so when you tighten everything down, you wipe off the excess caulk. Now, you have a watertight seal underneath there. So now that I got it a little bit closer, you can get a better view of this guy. Square, I was getting 1 3/4 inches square. And the hoses are a nice heavy-duty braided metal hose. So they have blue on one for cold and red on the other for hot. And they're threaded in, so you should simply unscrew your hot and cold water connections once you've turned your water off on your faucet. Take the old one out, put this in, put the new water lines on. You have two washers here. The black rubber one goes up towards the very, very top. And you can follow the instructions that come with it as well to be sure you're installing it correctly. Normally, you wanna get one of them started, and then you can get the other one through here after that. Okay. And then those would go all the way up there under the sink. Now, this guy has a nice slit in it that makes it easier to get in place. And then you would simply screw this on all the way down to the backside on your side of the sink. Once you've got that tight, then you got two set screws here, and you would tighten them down to finish that connection and make it super tight, ensuring that it's not gonna fall off or anything. Well, folks, that is gonna wrap it up. Just a nice, elegant faucet today by Utopia. This is the Bathroom Vessel Sink Faucet, single lever in black. I'm Steven, thanks for watching.