Looking For 12v Refrigerator To Replace Dometic DM2672

Question

Question:

Hello, We have a DM2672 refrigerator and want to replace it with a 12v electric only. Do you know what would be compatible to fit in our space? Thank you.

asked by: Susan R

0

Expert Reply:

Hello Susan, thanks for reaching out. Yes, we do have a good 12v option for replacing that. Based on the specs I found online, the Dometic DM2672 fridge is a 6 cubic foot unit that measures approximately 54-5/8" tall x 25" wide x 25" deep.

We do have a good replacement for this. I recommend the following:

- Furrion Arctic RV Refrigerator w/ Freezer - 8 cu ft - 12V - Stainless Steel - Left Opening Doors # FR46GD

This fridge measures 53-1/8" tall x 25-3/4" wide x 24-1/4" deep so it should fit nicely in your cutout as long as the extra 3/4" of width isn't a problem.

What prompted the switch to a 12v fridge? Do you go off grid a lot?

expert reply by: Jesse M

0

Furrion Arctic RV Refrigerator w/ Freezer - 8 cu ft - 12V - Stainless Steel - Left Opening Doors
(click to enlarge)

Furrion 2.

4/27/2026

Furrion 12volt Refrigerator works great in my 2007 Acrtic Fox truck camper. It was a good move for me to move to a 12volt Furrion Refrigerator. I Bought this from etrailer in 2025.

Jesse M.

4/28/2026

@Furrion2 Nice! Glad to hear the Furrion fridge is working out. Thanks for sharing!

Susan R.

5/2/2026

Hello John, Do you have that with right opening? We can't use the left opening option. We are on a seasonal site and don't travel and don't like the propane/electric fridge. Thank you

Jesse M.

5/4/2026

@SusanR Hey Susan! The doors on this unit are reversable, so you switch it over to right opening if you wish.

Susan

5/10/2026

@JesseM Thank you for that information. We'll have to figure out how to measure ours with the fridge in it so we know for sure if it will fit. Could you also direct me to the entry door locks for our 2021 Gulf Stream Cabin Cruiser 24rbs?

Jesse M.

5/11/2026

@Susan Yes, we should have a door lock replacement for you, but those aren't make and model specific so there's no way to look up your rig to know exactly what door latch it has now. You'll need to take a close look at the current lock and measure the overall dimensions and cutout size. A lot of campers like yours use a standard door lock like the Global Link RV Entry Door Locking Latch # 295-000019. This is 3-1/2" wide x 4-1/4" tall and it fits cutouts that are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. Please compare this to your current lock and see if it matches. If not just let me know.

Answer 1

Hey Robert & Carol, That part number comes back to a custom order piece. Is this the channel on the side of your RV that the fabric from your awning slots into, like part #LC715216? If you'd like to email me some pictures I'd be happy to…

view full answer...

Answer 2

Hey Randy, The arms on your slide-out awning have A&E labels so you'll actually have to reach out to Dometic because Solera and other brands use different size components, making them incompatible with each other. If you give Dometic a call…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Looking For 12v Refrigerator To Replace Dometic DM2672

Continue Researching