Hey Troy! The reason you aren't seeing a direct replacement is because they're no longer around. Everyone switched to the new R32 refrigerant in 2025 because of the EPA regulations so R410A units are no longer being produced. All of the old…
Hey Michael! Since you were looking at the SoftStartRV Soft Start #SSR54FR are you wanting that built in as well? The Active Controls ActiveStart Plug-In Soft Start for RVs #AS94FR is a soft start and surge protector all in one. If you aren't…
Hi Chris, that’s a great question and I’m glad you’re checking before loading that bike up. With the Roadmaster adapter part #RO24FR being rated at 400 lbs tongue weight, you’d be right at its limit with your bike and carrier, and once you factor in…
Hi Debbie, thanks for reaching out. You are on the right track looking for a 12" drop adapter. For the amount of drop you need, the best heavy-duty option we have is the Gen-Y Adjustable 2-Ball Mount with 12" drop, part #325-GH-625. It uses…
Ethan, if you’re not constrained by the original cutout, the decision really comes down to shore power rating and battery needs. -Choose the #PM47VR if you’re on 30-amp service with light duty 12V loads (12v led lights, fan etc.) -Step up to the…
Hey Jess, welcome back, and good question. Short answer, no, it’s not stated as a .02 absolute rating, and that’s the key distinction. Blu Tech lists the AR3 as a 0.2 micron filter, but they also clearly note that those micron claims are “based on…
Hey Chad! Since you have a Curt Helux on there right now we know you have the Rhino bolt pattern. If the GVWR of your 2026 Alliance Paradigm is under 16,360 lbs you need the #GY33GR. If you have one of the models with a higher GVWR you need the…
Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…
Hi Jim, thanks for the questions. Cutting the DeeZee Custom-Fit Truck Bed Mat #DZ28GJ for the puck system is very manageable since the material is thick but still easy to work with. The best method is to set the mat in the bed, mark the puck…
Hello Thomas, thanks for reaching out. Sounds like you are looking for the replacement surge protection module for the Power Watchdog Surge Protector #HU82VR. If so, we have just the thing! You will need the following: - Replacement Surge Protection…
Hey Jon, happy to help. Yes, I was able to find the replacement parts to #BM44YR. The 90 degree angle #BM99RR and the check valve #BM98GR have 1/2" MPT fitting that connect directly to your B&B RV Water Center. So no worries about…
Hey Peter, what hanger dimensions do you need? What height from the mounting surface does the bolt hole need to be? With that I can see if we have a thicker gauge steel hanger option.
Hey Troy! The reason you aren't seeing a direct replacement is because they're no longer around. Everyone switched to the new R32 refrigerant in 2025 because of the EPA regulations so R410A units are no longer being produced. All of the old…
Hey Michael! Since you were looking at the SoftStartRV Soft Start #SSR54FR are you wanting that built in as well? The Active Controls ActiveStart Plug-In Soft Start for RVs #AS94FR is a soft start and surge protector all in one. If you aren't…
Hi Chris, that’s a great question and I’m glad you’re checking before loading that bike up. With the Roadmaster adapter part #RO24FR being rated at 400 lbs tongue weight, you’d be right at its limit with your bike and carrier, and once you factor in…
Hi Debbie, thanks for reaching out. You are on the right track looking for a 12" drop adapter. For the amount of drop you need, the best heavy-duty option we have is the Gen-Y Adjustable 2-Ball Mount with 12" drop, part #325-GH-625. It uses…
Ethan, if you’re not constrained by the original cutout, the decision really comes down to shore power rating and battery needs. -Choose the #PM47VR if you’re on 30-amp service with light duty 12V loads (12v led lights, fan etc.) -Step up to the…
Hey Jess, welcome back, and good question. Short answer, no, it’s not stated as a .02 absolute rating, and that’s the key distinction. Blu Tech lists the AR3 as a 0.2 micron filter, but they also clearly note that those micron claims are “based on…
Hey Chad! Since you have a Curt Helux on there right now we know you have the Rhino bolt pattern. If the GVWR of your 2026 Alliance Paradigm is under 16,360 lbs you need the #GY33GR. If you have one of the models with a higher GVWR you need the…
Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…
Hi Jim, thanks for the questions. Cutting the DeeZee Custom-Fit Truck Bed Mat #DZ28GJ for the puck system is very manageable since the material is thick but still easy to work with. The best method is to set the mat in the bed, mark the puck…
Hello Thomas, thanks for reaching out. Sounds like you are looking for the replacement surge protection module for the Power Watchdog Surge Protector #HU82VR. If so, we have just the thing! You will need the following: - Replacement Surge Protection…
Hey Jon, happy to help. Yes, I was able to find the replacement parts to #BM44YR. The 90 degree angle #BM99RR and the check valve #BM98GR have 1/2" MPT fitting that connect directly to your B&B RV Water Center. So no worries about…
Hey Peter, what hanger dimensions do you need? What height from the mounting surface does the bolt hole need to be? With that I can see if we have a thicker gauge steel hanger option.
RV power cords are essential for connecting your RV to shore power, ensuring all your appliances and systems run smoothly. When choosing a power cord, consider the length, amp rating, and flexibility. A good power cord should be durable, easy to handle, and provide a secure connection to prevent any power issues during your travels.
Look for a cord with the right amp rating for your RV, typically 30 or 50 amps. Consider the length you need to reach power sources comfortably. Flexibility is key for easy handling and storage. A 90-degree plug can reduce strain on connections, and a durable, weather-resistant design ensures longevity.
A high-quality power cord will have solid, secure plugs and a flexible, durable cable. It should maintain a good electrical connection without overheating, even under continuous use. Look for cords with positive reviews about their performance in various weather conditions and ease of use.
Yes, RV power cords can be used as extensions to your built-in RV power cord. Ensure the extension cord matches the amp rating of your RV's system. This setup is ideal for reaching distant power sources and maintaining a reliable connection for appliances like refrigerators.
A 90-degree plug reduces strain on the connection point, which can prevent wear and tear over time. This design is especially useful when space is tight or when the cord needs to run close to the ground, providing a more secure and less obtrusive connection.
A lighter 50 amp to 30 amp power cord is easier to handle and store, making it ideal for setups where a full 50 amp capacity isn't necessary. It's perfect for running smaller appliances or when using a generator, as it reduces the load and simplifies your power management.
Filters
