Video Transcript for Phoenix Faucets Hybrid RV Kitchen Faucet Spec Review

Speaker 1: Today we're taking a look at the Phoenix faucet, single-handle, RV kitchen faucet. This unit adds, or replaces, a kitchen faucet in your RV. It's made from a completely lead-free design. It has the single lever handle that gives the unit a really nice look and easy operation.You'll notice all the hardware that it comes with, that's laid out here on the table. It includes all necessary mounting hardware. Also, comes with two different styles of deck plates.

When installing a faucet, you basically have two different options. You have a single hole installation option, or you have a three hole installation option. Both options are available with this faucet and it comes with the necessary hardware for either option. That's why it comes with the two different style bases, or deck plates. So this would be for the three hole installation option.You have the hole in the center for the shank, holes on the side, for the studs, which would secure using the plastic nuts.

Then you have the deck plate for the single hole installation option, which on the underside, you would install the correct hardware for that option, as well. Now, I do want to point out that if you are using the three hole, or the one hole, the only difference is whether, or not, you use the studs and the plastic nuts. For either option you would still use this device, right here, which threads onto the center post, makes everything tight and secure.The unit does feature a hybrid shield and underbody. Hybrid design means that the unit is constructed of both plastic and metal components. Also, want to point out that if you're using the three hole installation option, these outer holes will need to be separated on center by about eight inches.The unit also features a ceramic disc valve, or cartridge, has a low flow aerator on it with a flow rate at 2.2 gallons per minute.

These are your hot and cold water lines. The unit features a nice rubbed bronze finish. The diameter of the shank, that's this portion right here, that's one and five-sixteenths of an inch. This base measures 10 and three-eighths of an inch long by two and three-quarters of an inch wide. This base has a diameter of two and three-quarter inches.

Once this is installed, from the center of where it mounts to the center of the water flow is about eight and a half inches.That's going to do it for today's look at the Phoenix faucet single-handle RV kitchen faucet.