Pull-down spout on this kitchen faucet rinses that tough food residue off your plates and self-retracts with the adjustable hose weight. Low-flow aerator conserves your water supply by reducing the flow of water without compromising water pressure.
Features:
Specs:
Pull the spout down so you can easily tackle that food caked onto your plates or rinse the sides of the sink from any angle. Toggle between the stream and spray options depending on how much pressure you need or how long that food has been sitting there. When you're done using it, the spout self-retracts with a hose weight that can be adjusted anywhere along the spray hose.
To install, use the inlet shanks and drop the new faucet and a deck plate in place of your existing faucet. Thread the mounting nuts onto the shanks so that the washers are in between the nuts and the underside of the counter. Then thread the pull-down head's hose onto the faucet's center inlet, and connect the braided hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with the etrailer.com. And today we're gonna take a look at this Phoenix Faucets Catalina RV kitchen faucet with pull down spout. This gooseneck spout faucet is going to let you upgrade the kitchen faucet in your RV or camper. And this is a three hole installation with the included deck plate and mounting hardware. So using the standard NPSM inlet shanks you're just going to drop this new faucet and deck plate in place of your existing faucet and then thread the mounting nuts onto the shanks against the underside of your counter. And then you're going to connect the pull down head hose to the hose on the faucet body.
And then finally install the hose weight that you see right here and connect the hot and cold water lines. The use of tub and tile caulk may be required depending on your installation and that is not included with this faucet. So the star of the show is this pull down head that's going to make it easy to get food off of your dishes. And we have some toggle button switches here that's going to let you choose between stream and spray options. And these rubber spray tips are going to be easy to clean.
And as I mentioned that hose weight can be adjusted anywhere along the spray hose and it enables this spout to self retract. So if you have that weight on your hose initially and it's not retracting like you wanted to or as quickly or as completely this can be easily adjusted along that hose. The low flow aerator is going to help conserve your water while you're soaping up your dishes. This has a flow rate of 1.8 gallons per minute, and as I've been showing you throughout our time together here this gooseneck spout does rotate on this oval base. So this is a dual handle design with lever style handles and quarter turn cartridge stems are going to enable the faucet to fully turn on and turn off.
And the washer-less design is going to reduce friction and daily wear for long lasting durability. This features a non-metallic ABS plastic construction with this matte finish and a spin welded celcon thermal plastic underbody. So I took some measurements earlier before our time together and I wanna begin with the overall dimensions to help you determine if this is going to work for you. Measuring the width first from handle tip to handle tip, we are sitting right at 13-1/2 inches wide. And then measuring from the countertop that this is going to be installed on to the tallest point here of our spout, we are sitting right at about 14-1/2 inches tall.
Now turning to just the dimensions of the base itself, the overall width we are sitting right at about 10-1/4 inches wide and then right at about 2-1/4 inches deep. And again, just the base itself about an inch tall from the countertop. The spout length measuring from the center of the spout all the way to the end of our aerator we're sitting at about 9-3/4 inches. And then the distance from the countertop to our aerator we're sitting right at about 6-3/4 inches. The inlet shanks, the inner diameter of those inlet shanks are half an inch and the outer diameter is 13/16 of an inch. And then the distance between these shanks, center to center is 8 inches and their length is 2 inches. Instructions are included to walk you through the very simple installation process. Obviously I don't have this connected to water but just setting it up here installing it on my little display table here it was an easy setup and that weight was very easy to get installed and adjusted as well. So this'll be a very simple, very easy installation for you. And again this matte black finish is very attractive, very stylish. You just wanna be aware that with a lot of those matte finishes, sometimes they can scuff or scratch easily and chip away that finish. So just be aware of that. I think this finish is going to be relatively durable for you, but that's always a possibility with a matte finish similar to this. Well that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.6 out of 5 stars (248 Customer Reviews)
Pull-down spout on this kitchen faucet rinses that tough food residue off your plates and self-retracts with the adjustable hose weight. Low-flow aerator conserves your water supply by reducing the flow of water without compromising water pressure.Great service.Very nice unit.
A nice upgrade to the original faucet. Fortunately our sink had a center hole for the hose to pass through.
To early to tell yet on longevity but nice so far
I am so happy with this purchase. It gives me the feel of a house in my RV! The water spray is wide and has so much better coverage than the old Facet/Showerhead I had in the bathroom. Plus it looks so cool! My grandsons love it because I can lower it to their height and they can get a warm shower with water at their level!! I recommend for any are upgrade:)
This shower faucet is fine and works as it should
Finally, someone created a top side diverted valve for an rv shower! All these years, everyone just looped the hose from bottom side connection; never was right! With this one, that problem just ended! Five-Star all the way around on this-one! Cheers, from one happy camper! ??
Shipped on time zero damage on delivery box.
From start to finish on installation it took 30 minutes. Looks great and works as advertised.
I took two pics of old faucet and picks of the new one I installed
Looks great and it works great too! The front panel of the island slides out so replacement was easy with no tools needed.
Faucet looks nice but, the valves go from horizontal off position to vertical down on position & this is backwards from old faucet.The faucet is all plastic & my old Phoenix faucet was metal & had inner & outer threads that let me extend the 1 1/2" pipe threw wall that is one inch thick.when I used the supplied plastic pipe nuts I had no room to install 1/2"FIP hose.so the faucet is held on by two washers,an o-ring & the 1/2" FIP hose for now until I end up buying a real faucet.
I wish I could give this faucet 5 stars, but it's the usual chromed plastic type for RV's and not metal (preferably stainless steel) like residential faucets; unfortunately, the way my sink cabinet was built prevents using residential faucets. That being said, it's fairly well-made, very easy to install and reasonably priced. Of course, there's absolutely no reason why it couldn't have been made from stainless steel to last longer, except that they'll sell more because the plastic ones wear out.
Exact replacement for original shower enclosure. Good product.
Looks nice. My husband had to work with it a bit and take out a white plastic piece to give us decent water pressure. Before that it was just dripping. Also, the end piece (not sure what is called) couldn't be screwed on evenly. There is a small gap that is noticeable to me but not my husband.
It was installed in a 1957 Airstream that I gutted and refurbished. I have it for sale. The faucet looks good.
Good fit for replacement of broken original faucet and very easy to install
Perfect fit replacement for my leaking outdoor mounted RV shower. Speedy delivery, fair price.
works way better than factory 1994 skyline layton
just what I needed for the boat, easy to install and does what I need it to do
I have just installed this faucet and it is a nice improvement from the factory faucet. Fairly simple to install but I had to remove my sink to reach the connections. Fortunately, all of the plumbing was plastic and easily removed and reinstalled. Also the sink fasteners were brackets with wing nuts.Time will tell if the new faucet holds up to a season of camping.
Really nice up grade for trailer easy to install.
Thank you for all your help, when I placed the order I could not figure out why it told me that it would not ship until sept 3rd thru the sept 5th. I emailed etraier and they told me that they would take care of it and once I got ahold of you I received my products within a week and a half, Thank you for being on top of your messaging and getting back to me ASAP. my only thing I would say is that they should tell you when you order of there is going to be a waiting period of that long or if that Item is not in stock at etrailer. Thank you for all your help you ended up making my experience with etrailer so much better.
Thank you etrailer for all your help
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.