Sleek RV kitchen faucet has 1/4-turn stems that help prevent leaks so you won't have to worry about wasted water. Washerless stems reduce daily wear and tear to help extend the life of your faucet. Includes deck plate and mounting hardware.
Features:
Specs:
To install, use the inlet shanks to drop the new faucet and deck plate in place of your existing faucet. Then tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at a dual handle RV kitchen faucet. Now this unit adds or replaces a kitchen faucet in your RV. It's going to feature the dual acrylic lever handles. It gives the unit a really nice look. Also makes turning on and off and controlling water flow very easy to do. It's got a nice comfort grip design to it.
The base and the spout are made from a plastic construction that features a brushed nickel finish. It features a completely lead-free design. It does come with a low flow air rater right here on the spout. That's going to have a flow rate of 2.2 gallons per minute. The spout will route 360 degrees and it's got that collar at the bottom and that's how it attaches to the base, so that's just a threaded design.
It does come with all the appropriate seals needed to ensure leak-proof performance. The mounting area's going to require two holes for your installation. These areas right here are the connection points for the hot and cold waterlines. They'll need to go through the countertop and then it does come with the threaded plastic nuts there that you can secure on the underside of the mounting service for nice tight instillation. Now these connection points are separated on center by 8 inches.
They're going to have an overall length measurement of about 2 inches. Outer diameter is 13/16/7 inch, inner diameter is a half inch. Now the base itself front to back just measuring this area right here, that's going to give us a measurement of about 2 and 1/4 inches. Overall length of the base going edge to edge, that's going to give us a measurement of about 10 and 1/4 inches. A few other measurements I need to mention for you real quick is I took a measurement as if it was installed, so I measured from the very top of the counter to the tallest point of the faucet which is right here at the top of the spout and that height measurement was about 6 and 1/2 inches.
From the countertop to the closest point where the water comes out, height measurement is around 5 inches. Overall depth with the spout and the fully straight out position front to back is about 9 and 1/2 inches. Center of the base to center of where the water comes out is about 8 and 1/8 of an inch. That's going to do it for today's look at the Phoenix Faucets Dual Handle RV Kitchen Faucet.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.