RV bar faucet is great for a smaller kitchen or wet bar so you can easily wash vegetables for dinner prep or grab a quick glass of cold drinking water. Spout rotates around so you can access the faucet from multiple angles around your countertop.
Features:
Specs:
To install, assemble the 2 pieces of the new faucet together, and drop the inlet shanks of the new faucet and deck plate in place of your existing faucet. Hand-tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix Faucet's 4 inch dual handle RV, bar, and kitchen faucet. This is a chrome plastic construction. It's going to feature the dual acrylic handles for the hot and cold water functions. The spout is able to rotate. You can see there that it easily swings side to side. The flow rate is 2.2 gallons per minute.
It does have that low flow aerator on there. It's going to help it keep from wasting water. It's a 2 hole mount design. These connection points are for your hot and cold water lines. It does come with the plastic mounting base and the mount nuts for an easy installation. The distance between the connectors on center, it's going to measure 4 inches.
Each one's going to give us an outer diameter of 13/16ths of an inch with an inner diameter of a half inch. The length of those units are going to measure 2 inches long. To install this all you need to do is take the plastic nuts off of the unit, place the faucet down through the holes in the counter top. Then the plastic nuts thread onto the connection points here, but those thread on on the underside of the mounting surface. Then you tighten those up for a nice, tight, secure installation. The spout length, we took a measurement from the center of the unit to the center of where water comes out, and that gives us a measurement of 8 inches.
The base, this is going to give us a length measurement of around 6 to 6 and 1 quarter inches long by 2 and 1/8th of an inch wide or deep. From the bottom of the mounting surface to the top of the handles is about 3 inches. I also took a straight line measurement from what would be equivalent to the counter top height to the closest point of where the water comes out, and that's about 5 and 1 quarter inches. Overall depth from very back to very front's about 10 inches. It's from this area back here to this area right here. This unit also comes with your detailed installation instructions to help walk you through the install process step by step.
You can see here that it's going to walk you through. It's got diagrams there to help with the installation. On this side it's going to go over some operating instructions, cleaning tips, helpful hints, and some cautions. On the back it's got a detailed parts list. That's going to do it for today's look at the Phoenix Faucet's 4 inch dual handle RV, bar, and kitchen faucet.
Average Customer Rating: 4.8 out of 5 stars (308 Customer Reviews)
RV bar faucet is great for a smaller kitchen or wet bar so you can easily wash vegetables for dinner prep or grab a quick glass of cold drinking water. Spout rotates around so you can access the faucet from multiple angles around your countertop.
Do you have a question about this RV Faucet?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.