Does the First Generation Voyager WiSight Camera Work W/ The Voayger WiSight 2.0 Monitor?

Question

Question:

Hi, Is the VOYAGER WIRELESS WISIGHT 2.0 monitor compatible with the VOYAGER WIRELESS WISIGHT camera prior gen?

asked by: Steve

0

Expert Reply:

Unfortunately, the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor # ASA27FR is only compatible with the Voyager WiSight 2.0 Wireless systems.

Since the first generation monitors are now obsolete you'd have to upgrade your entire camera system to the newer Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV # ASA37YR.

expert reply by: Bryce D

0

Henry S.

7/22/2024

Would the existing wiring of a first generation Voyager in an Airstream 2021 be compatible with a 2.O Voyager unit?

Reply

Bryce D.

7/23/2024

@HenryS Unfortunately, the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor # ASA27FR is only compatible with the Voyager WiSight 2.0 Wireless systems. So all that wiring you have for the first gen is only going to work with the first gen, you'd need to use the second gen wiring instead.

Reply

Henry

7/23/2024

@BryceD thank you. I sold this trailer and can't find the monitor. I guess I have to face the music and buy them a new unit. If I were to find a used generation 1 monitor, what model numbers would I look for? Thank you again

Reply

Bryce D.

7/23/2024

@Henry I'm not too sure what the part number is for the monitor, but I know the camera is WVH100 so you can take that to ASA and they should be able to let you know what it is.

Reply

See All (5) Replies to Henry S. ∨

Answer 1

To pair the Voyager WiSight 2.0 Wireless RV Backup Camera 7" Monitor #ASA27FR with your Voyager WiSight 2.0 Camera #ASA64YR or #ASA74YR you will need to follow the following steps. PAIRING PROCESS This system contains an Auto-Pairing function.…

view full answer...

Answer 2

I have attached for you below the pairing procedure for the Voyager WiSight Wireless RV Backup Camera System part #ASA84YR. Please note, a mistake I have made in the past was applying power to the camera too soon, this cannot be done until the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

view full answer...

Does the First Generation Voyager WiSight Camera Work W/ The Voayger WiSight 2.0 Monitor?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching