Instructions to Reconfigure Replacement Linc Analog Remote

Updated 06/15/2020 | Published 08/03/2019

Question:

We have a 2017 wildwood 28 ckds. We cannot seem to get our remote to reconfigure and sync and need some help. We also cant tell what all of the functions are.

asked by: Amanda N

Expert Reply:

I am not certain if the Replacement New-Style Linc Analog Remote - 5 Function # LC292614 came with any instructions so I have added photos of the instruction manual for you.

You'll need to start by syncing the controller and the functions will be chosen by the "Select" button, which you can then use the remote to operate. To configure it you need to hold the "In and Down" buttons unit the bottom LEDs begin to blink, which should only take a few seconds.

expert reply by: Kyle S

click to enlarge

Larry

6/10/2020

Where is the receiver

Chris R.

6/15/2020

The receiver location for the LINC system can vary but most often it's found somewhere near where the generator is stored. If it's not there and you can't find it, your best resource will be the trailer/RV manufacturer. They should be able to tell you exactly where it's located.