See what our Experts say about this CURT Accessories and Parts

• Is There A More Heavy Duty Adapter For The Carr Hitch Step CARR190011B?
  Hi Renato! The 2" hitch attachment on the Carr Mega Step Fold-Up Step - Black # CARR190011B allows this to handle up to 500 pounds, so it's very trustworthy. That said, I am not aware of an adapter for it. However, it is just 4 bolts holding the adapter piece to the back of the step. Something could probably be fabricated that would bolt onto this fairly easily and inexpensively. I'm not sure what that would do for the capacity and it would likely void the warranty, but it could technically...
  view full answer...
• Looking For Replacement Pins For etrailer Adjustable Ball Mount e66PR
  Hey Bob, thanks for reaching out. We do have pins that will work with the etrailer Adjustable 2-Ball Mount # e66PR. There is not a direct replacement for the pins available, but you can use the Replacement Pins and Clips for Curt Adjustable Channel Mount Hitches item # C45925. They are a bit longer than the pins that come with the ball mount but they will work for replacing the adjustment pins. If you want a locking pin, the etrailer Hitch Receiver Lock # e98881 is what I recommend. You...
  view full answer...
• Does Curt Adjustable 2-Ball Channel Mount For 2-1/2" Hitch & 10-3/8" Drop Come With Pintle
  Hey Colt, I did a lot of searching and unfortunately the Curt Adjustable 2-Ball Channel Mount for a 2-1/2" Hitch # C45927 does not come with a pintle hook-only attachment, and there isn't a similar option for a 2-1/2" hitch with a rise/drop similar to the 10-3/8" Drop, 8-7/8" Rise this mount has. I know it's not what you wanted but just to be thorough, you can use this mount with Pintle Hook # C45922 and Pins & Clips # C45925.
  view full answer...
• Replacement Parts for Curt Pintle Hook with 2-5/16" Ball
  Hey Bill! The Curt Pintle Hook with 2-5/16" Ball # C45908 is what you purchased in 2022. We have the following parts available: -Curt Pintle Hook with 2-5/16" Hitch Ball - Channel Mount # C45922 -Replacement Pins and Clips for Curt Adjustable Channel Mount Hitches # C45925 -Replacement Shank for Curt Adjustable 2-Ball Mount # C45917 How did you manage to bend it?
  view full answer...
• Do You Have Replacement Pins for the etrailer Adjustable 2-Ball Mount e66PR?
  Hey Johnny. The adjustment pins for the etrailer Adjustable 2-Ball Mount item # e66PR are not available for individual purchase. The Replacement Pins and Clips for Curt Adjustable Channel Mount Hitches item # C45925 are a bit longer but will work. If you're interested in a set of locking pins. The Fastway Trailer Hitch Lock and Adjustment Pin Lock Set for Flash E Series Ball Mounts item # FA86-00-3660 will also work and are controlled by the same key. What are you needing a set of...
  view full answer...
• Replacement Pins for the etrailer Adjustable Ball Mount e66PR
  Hey, Brendon. At this time we do not have replacement pins for our etrailer Adjustable 2-Ball Mount part # e66PR. We do have part # C45925 which are the replacement pins for a Curt Adjustable Channel Mount. They are just a tad longer. Sorry we don't have something that is an exact replacement, especially to match the color of the original pins.
  view full answer...
• Replacement Channel Mount Ball Platform for 20K 3 Inch Wide Adjustable Curt Shank
  The internal channel width of the Replacement Shank for Curt Adjustable 2-Ball Mount # C45917 is 3" while the Replacement Ball Platform # C28KR you're looking at has a 2-3/4" width and is for the Curt Rebellion XD rated only for 15K as opposed to the 20K rating for your shank. Since there will be a 1/4" difference I recommend going with the Curt Pintle Hook # C45922 instead which has the higher rating to match your shank plus it comes with a 2-5/16" hitch ball that can be swapped out for...
  view full answer...
• Hitch Ball Compatible with Lock N Roll Adjustable Channel Bracket for 1-1/4 Inch Hitch Receivers
  The Lock N Roll 3-Position Adjustable Channel Bracket for 1-1/4" Hitch Receivers - 2,500 lbs # 336VS507 will use the Lock N Roll Articulating Hitch - Adjustable Channel Mount - Vehicle Side - 11,000 lbs # 336VS503 for your connection to your trailer. If you then want to use the channel bracket for a hitch ball, you can use the Replacement 2" and 2-5/16" Dual-Sided Hitch Ball for Curt 2" Adjustable Ball Mount # C45912. Then you can use the pin and clips # C45925. With this combination...
  view full answer...
• Replacement For Platform For Curt Ball Mount C45901
  By shank with the 1" diameter hole I believe you are referring to the ball mount platform of the Curt Channel Style Adjustable Ball Mount # C45901. And while Curt does not offer this separately, we do have an option for you that will work, which is a dual-sided hitch ball that fits the platform; you will also need the pins to mount it: - Replacement 2" and 2-5/16" Dual-Sided Hitch Ball for Curt 2" Adjustable Ball Mount # C45912 - Replacement Pins and Clips # C45925
  view full answer...
• Replacement Adjustment Pins Needed for the Curt Pintle Hook with 2-5/16
  Yes you sure can! The replacement pins that are used to adjust the hitch ball and pintle hook on the Curt # C45910-15-20 are found on our site listed as part # C45925. If you would rather go with a locking pic set I recommend the Curt Lock Set # C23556. This will replace one of those adjustment pins and then also be used to lock the shank of this ball mount to your trailer hitch receiver.
  view full answer...
• Replacement Pin For Curt Channel Style Adjustable Ballmount
  We do have the replacement pins and clips for the Curt Channel Style Adjustable Ball Mount, part # C45900. You will need to order part # C45925. This comes with 2 pins and 2 clips that will work for your ball mount.
  view full answer...
• Is There A 2-Ball Attachment That Fits The Lock N Roll 3-Position Adjustable Channel Bracket LR74VR
  Hello Nathan, thanks for reaching out. Yes, there is! You can use the Replacement 2" and 2-5/16" Dual-Sided Hitch Ball # C45912 with the Lock N Roll 3-Position Adjustable Channel Bracket # LR74VR. The dual ball fits a 3" channel with holes 1" or 2" apart which is exactly what the Lock N Roll channel uses. You'll also need a few pins # C45925 to hold it in place.
  view full answer...
• Replacement Pin and Clip Recommendation for Curt Channel Adjustable Ball Mount
  For replacement pins that hold the balls of the # C45900 to the shank of the assembly we have the part # C45925 which comes with 2 pins and 2 clips. We do not have them individually though.
  view full answer...
• Comparing Pintle Hook and Gooseneck for Towing With 2015 Ram 2500
  A pintle hook combo like the Curt Pintle Hook with 2-5/16" Hitch Ball # C45922 and a gooseneck are very different applications and generally aren't comparable because they require such different applications and configurations for both your trailer and truck. Assuming you have a truck that is set up for both, a gooseneck application will absolutely be the way to go because it will be a more cost-effective option and will give you better ride quality when towing. You didn't state your...
  view full answer...

Do you have a question about this Accessories and Part?