This exterior wall vent keeps water from sneaking into your range hood exhaust. The 1-3/4" collar gives a snug, secure fit to the outlet, while the built-in damper closes tight when the fan’s not running. Latching tabs let you lock it shut for extra protection from wind and rain when you’re parked or in storage.
The molded canopy acts like a small awning over the vent, helping block rain and spray before they reach the outlet. The sturdy plastic body in Colonial White blends cleanly with most exteriors and won’t rust or corrode over time.
It mounts right at the point where the range hood duct exits the wall. Cut the 10-1/2" wide x 3-3/4" tall opening, apply sealant, and fasten it with 10 screws (sold separately). Once it’s secured and sealed, it’s ready to go.
This vent is made for long-term use outdoors, holding up against weather and vibration. It comes with a 2-year warranty for added peace of mind once it’s installed and in service.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steve here with etrailer.com. Today we're looking at our Ventline exterior wall vent for your RV range hoods, with a nice one inch collar and a beautiful colonial white finish. So, folks, as you know, exterior wall vents like this just help shed water out and away from the side of your RV, camper, whatnot. And in this case, this is the RV's range hood exhaust outlet. You have a one inch collar here, it's 10 1/2 inches by 3 3/4.
So, that's what your rough opening needs to be, at least, for this to fit. And then you need to have space on the outside of that for mounting this with the sealant and screws. Now that sealant and screws are sold separately, you can pick them up here, or locally. It's totally up to you. Inside, you've got the built-in flapper.
Let me see if I can get a better view of that here for you. (plastic clacking) And then you've got these tabs on both sides that you can simply pull over. And that's actually going to latch or lock this vent from coming open. So, maybe you're winterizing, you don't want critters to getting there, or maybe you're just going down the road. You don't want the flap up.
You have that option of locking it with those latches. It's a simple install. Like I said, the seal and screws are sold separately. This again, is the colonial white version. Well, folks, that is gonna wrap it up for our quick look together.
Again, I'm Steven. Thanks so much for your time. Thanks for watching. And as always, if you want to give us some feedback, maybe some photos of it in use, we really would appreciate that. Have a good day.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Fit perfect easy to install.
Unit was not as sturdy as I expected, but it works. I added a vented hood to our RV so I cut the hole in the side and sealed the vent with putty and screws. Screws and putty were not supplied with the vent. You need to purchase those seperatly.
Easy replacement
fits perfect and works great!!
Vent fit in existing hole and much better quality than OEM
Great replacement.
Looks like a perfect fit however I have not installed as of yet. A helpful addition to the product description would be the outside dimensions of the finished frame.
The damper fell out of my old original range hood vent. It lasted 16 years so I can,t complain. I ordered a new vent from etrailer and it works very well. The price was more than fair also. Thank you all for providing excellent options for products and lots of info to go with them.
This purchase was a replacement for the exact vent that I purchased in 2020. Originally I gave this product a high rating. One year later as requested I updated my review noting the plastic had turned yellow, the locking tabs for the vent door required a ladder to operate and the vent flap was annoying as, unless it was locked, would clatter in the slightest breeze. This month 2023 I was washing the rv in preparation for a trip and I hit the center of the vent hood with a wash brush. The center "reinforcing" post broke off and the vent hood cracked. The plastic was not only yellow but now was also quite brittle. This is the third vent for the rv. The original 2006 Ventline lasted until 2020. The second 3 years. I purchased another as I was about to go on a trip and knew the replacement would be a no hassle install. etrailer expedited the shipment and generously waived shipping fees in consideration of the previous replacements short life span. I greatly appreciate their high quality customer service.
The vent that I just received is, as other reviewers have noted, constructed of thin material and was apparently not trimmed after being removed from the mold. I will shop around before replacing with another Dexter Ventline again.
My sealer tape and caulking skills need help but this is a very good direct replacement part all screw holes line up great part
Direct replacement for a 6-year old exterior wall range hood vent on my 2014 Grand Design RV. Simple installation, just 10 screws and re-caulking to keep the water out. Great price and fast shipping from etrailer.com !
After accidentally leaving the damper flap unlocked for the drive home, it mysteriously decided not to return home with us. It flew away mid travel I have to assume. Etrailer.com had exactly what I needed to return to stove top vent flap happiness. Highly recommended as etrailer.com stocks exactly what you need for your R.V.
Good fit and finish. The mounting hole pattern was different but I was able to easily re-drill holes to match the existing holes. Overall, very happy with the vent and it also looks good on the coach.
My new trailer came with a stove vent that exhausted to the inside of the trailer making it unbearable to cook inside in the hot sun of Florida. I modified the fume hood so it could vent through the wall the way it should have been in the 1st place. This plastic vent cover worked as good as any could be expected to do so and provided a neat appearance to finish off the modification. Reasonably priced to boot.
The hinge tabs on the top corners of the flapper that work to allow the flapper inside the vent to open when airflow happens and close to insulate the inside of the vent are not strong enough. I broke them easily when trying to reinsert them after the flapper popped off during installation. I suggest the manufacturer make the posts thicker and longer and more resilient to bending so that the flapper can be removed when needed and also stay attached and in place when inserted into the housing without breaking off.
This part fit perfectly on my 2010 Spririt Delux Casita. eTrailer always comes through for me.
I have been a satisfied customer of etrailer for years, however my most recent order was substituted with a different brand. I specifically ordered this Ventline product because my rv has a Ventline brand hood on it, and the color sounds desirable. What I got was a Dexter brand. It looks similar but it is not what was advertised, nor what I ordered. I emailed etrailer immediately upon discovering this to get their input or resolution. That was on a Friday afternoon so not surprising I haven't heard back...yet. I just don't want to settle for this substitute and find it doesn't fit perfectly and I have a gaping hole in the side of my rv while I search for a Ventline vent.
Replaced old range hood on '89 Class C. Fit like OEM. Wife loves the "new look".
Happy Wife happy life......:)
A replacement vent shroud that includes a coarse screen-like grid and a easy to use flap-lock to keep it closed during travel.
The knowledge and service of E trailer associates is impeccable. Kevin spent the time and did research to help me find the proper part that my Jayco dealer could not find. I had been waiting for over three weeks for news from the dealership to no avail. With one call to E trailer I had the part delivered to my doorstep in three days.
Perfect fit and excellent quality match. Thank you!!
No comment
Great product received the product quickly. Will definitely order from them again
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.