See what our Experts say about this Ventline RV Vents and Fans

• Replacement Range Hood Vent For A 2007 Eclipse Attitude FK19 Toy Hauler
  Hey Daniel, We unfortunately do not have a vent in a larger size to fit your trailer. I would look at your local hardware store for a plastic range hood vent that matches your sizing. You'll also want to pick up some butyl tape # AL28FJ and some non-sag sealant # 344270341437-1 to properly waterproof the vent.
  view full answer...
• What Exterior Wall Vent Can Be Used With the Furrion Ducted RV Range Hood?
  For the Furrion Ducted RV Range Hood with Light # FHO23SACRBL you're going to want to use the Ventline Exterior Wall Vent for RV Range Hood - Locking Damper # V2111-55. This vent will fit in 10-1/2" wide x 3-3/4" tall rough openings and has a collar depth of 1-3/4", but you'll want to measure your trailer's walls to determine the collar depth first. If it turns out you have 5/8" collar, then you'd want to use # V2111-03 instead. Any gaps that you may have can easily be covered with HVAC...
  view full answer...
• Overall and Mounting Hole Dimensions for Ventline Exterior Wall Vent for RV Range Hood V2111-03
  The dimensions of Ventline Exterior Wall Vent for RV Range Hood # V2111-03 are shown in the linked photo I prepared for you. Mounting hole spacing is also indicated. Overall edge to edge dimensions are 5-1/4 x 11-5/8-inches and the vent fits an RV wall opening of 10-1/4 x 3-1/2-inches. Mounting screws # 31071 and white silicone sealant # 0160297 to complete the installation are sold separately. The sealant can be used as both an adhesive (by placing a narrow bead on the mounting flange...
  view full answer...
  
• Actual Measured Dimensions of Ventline Exterior Wall Vent for RV Range Hood V2111-03
  Trailer makers rarely keep track of smaller items like vent parts used in fabrication of their trailers so finding the right replacement part is often just a matter of measuring, as you have done. Since we do have this item in stock, Ventline Exterior Wall Vent for RV Range Hood # V2111-03, I went to our warehouse to measure it for you. I put key dimensions on the linked photo that I prepared for you, including hole spacing. I have some additional information that I could not easily add...
  view full answer...
  
• Solution for Needing Replacement Jensen RV Vent Flapper
  Since we don't carry the Jensen brand of range hoods best solution we have is a new wall vent like the Ventline part # V2111-03.
  view full answer...
• Ventline Exterior Wall Vent for RV Range Hood
  I suggest the Ventline Exterior Wall Vent for RV Range Hood, # V2111-03 for a very easy DIY install.
  view full answer...
• Actual Weight of Ventline S0721 Series RV Range Hood S0721-20BD-F-1 and Matching Wall Vent
  The Ventline S0721 Series RV Range Hood that you referenced, part # S0721-20BD-F-1, has an actual weight of approximately 7-1/2-lbs (shipping weight including packaging is 9-lbs). Please note this range hood does NOT have a damper and does require a separate dampered exterior wall vent like # V2111-03 (this plastic vent has an actual weight of just a few ounces). For just about any size or brand of range hood we offer the packaging materials in which we ship the unit will weigh between...
  view full answer...
• Range Outside Vent Cover Dimensions and Compatibility with Lance Cabover
  All of our current outside vent cover for RV range hood options are 11-1/2 inches by 5-1/2 inches outside dimension so they are a little wider than what you described. They fit a rough opening that is 10-1/2 inches wide by 3-3/4 inches. I've attached the link to all of our exterior wall vents for RV range hoods because the interior depth for each is different. I've attached a video of part # V2111-03 to assist. These may work for your camper with some minor modifications if the dimensions...
  view full answer...
• Difference Between Ventline Range Hood Vents part number V2111-13 and V2111-03
  The difference would be the collar length that comes range hood vent. The part # V2111-13 has a collar length that is 1-3/4 inches in length and then the part # V2111-03 has one that is 5/8 inches in length. The collar length needed is going to be based on the thickness of the wall. The good news is that if you didn't want to measure you can always go with the longer one and then trim it down as needed.
  view full answer...
• Exterior Wall Vent Needed For The Furrion Ducted RV Range Hood With Light
  The duct opening on the back of the Furrion Ducted RV Range Hood with Light # FHO23SACRBP is 10" long x 3-1/4" tall so you would want a vent like the Ventline Exterior Wall Vent for RV Range Hood # V2111-55 ( # V2111-13 for white) or the Ventline Exterior Wall Vent for RV Range Hood # V2111-03. The # V2111-55 has a 1-3/4" collar, while the # V2111-55 has a 5/8" collar. You'll want to measure the depth of your trailer's walls to choose the correct size collar. Any gaps can be covered with...
  view full answer...
• Black Exterior Wall Vent for RV Range Hood
  We do have 1 exterior wall vent for a range hood. It is # V2111-55. The only difference, besides color, is how far the collar sticks into the wall. On the black one it extends 1-3/4 inches. That could be trimmed down though if needed.
  view full answer...
• How to Determine the Correct Outside Range Hood Vent
  When trying to find a replacement for your outside range hood vent the most important measurement is the opening where the exhaust ducting or outlet exits your RV. Each of the outside range hood vents we carry will fit a roughly 10-1/2" wide x 3-3/4" tall rough opening and will require 10 Screws # 31071 and Sealant # 0160297 to install. The Ventline Wall Vents # V2111-13 and # V2111-55 have a 1-3/4" collar, and # V2111-03 has a 5/8" collar.
  view full answer...
• Replacement Wall Vent Recommendation for a Trailer with a Jensen Range Hood
  If your vent uses a smaller opening that what the # V2111-03 that you referenced is designed to fit (10-1/2" wide x 3-3/4" tall rough opening), then you could remove the collar from the # V211-03 so that the back of it would sit flush with your trailer vent.
  view full answer...
• Replacement Roof Vent Lip for a Haulmark Enclosed Cargo Trailer
  It sounds like you need a replacement roof vent cover. To determine the correct one you need to go by the measurements needed and the hinge style. On the replacement cover pages we show the hinge styles up close to help select the proper parts. I have included a link to all of the lids for you. There are 3-point hinges, 4-point hinges, and continuous hinges. Cover # BV0554-01 fits 14-1/4 square roof vents and has a continuous hinge. Going by the measurements and hinge style is pretty much...
  view full answer...
• Replacement Exterior Range Vent for RV
  We do carry range hood exterior wall vents and all of them are 10-1/2 inches wide by 3-3/4 inches tall. Here are the options we have: Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 1-3/4" Collar # V2111-13 Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 5/8" Collar # V2111-03 Ventline Exterior Wall Vent for RV Range Hood - Louvered - Damperless - 1-3/4" Collar # V2018-01 Ventline Exterior Wall Vent for RV Range Hood - Louvered - Damperless - 1/2" Collar...
  view full answer...
• Replacement Stove Range Vent Cover Options For Keystone Sprinter Travel Trailer
  Hey there Alesia, we do have a few exterior vents for the stove/range on your travel trailer. I would go ahead and measure your vent opening and compare to the options below. You gave me the overall measurements and unfortunately we don't have anything that matches up, but perhaps your opening is actually smaller and matches one of the following options: - # V2111-13 fits rough-in opening of 10-1/2" wide x 3-3/4" tall with depth of 1-3/4" - # V2111-03 fits rough-in opening of 10-1/2" wide...
  view full answer...
• Could Ventline Range Hood Vent Fit as Replacement Older Jensen Range Hood
  We have several RV range hood exterior wall vents but they all need a 10-1/2 x 3-3/4 inch opening like # V2111-03. The dimension you gave sounds like it could be either the overall dimension of the vent or the opening. This cover has an overall length of 11 inches and a height of 5 inches.
  view full answer...
• What Exterior Vent Cover do I Need for My Range on My 2020 Forest River Alpha Wolf Travel Trailer?
  Without knowing the exact dimensions of your 2020 Forest River Alpha Wolf 26RL-L's range vent opening, we do have vents that may fit your application: - Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 1-3/4" Collar # V2111-55 - Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 5/8" Collar # V2111-03 Both of these vents have 10-1/2" wide x 3-3/4" tall rough openings. The # V2111-55 has a collar depth of 1-3/4" while the # V2111-03 has a collar depth of...
  view full answer...
• Replacement Exterior Wall Stove Vent Options
  I have a few options for you but unfortunately your RV information does not tell me what size exterior stove vent you need. I have listed out some of our options below, you will just need to compare them to the size you currently have to select the best one for you. All of the options are 10-1/2W x 3-3/4L Inch. The difference will come in color and collar size. - Ventline Exterior Wall Vent for RV Range Hood # V2111-13 (White/1-3/4" Collar) - Ventline Exterior Wall Vent for RV Range Hood...
  view full answer...
• Replacement Range Hood Exterior Vent
  We have several RV range hood exterior wall vents but they all need a 10-1/2 x 3-3/4 inch opening like # V2111-03. Since these vents are larger than the opening you have you could still use one of them by either expanding the opening or trimming the collar on the vent. Vent # V2111-13, # V2111-55 and # V2018-01 all have a 1-3/4 inch deep collar Vent # V2111-03 has a 5/8 inch deep collar Vent # V2009-01 has a 1/2 inch deep collar
  view full answer...
• Replacement Damper Lock Springs for Ventline Range Hood
  It sounds like you are needing the Replacement Damper Lock Springs # C0488-00. These lock springs are designed for Ventline P, B, and T Series Ventline Range Hoods and allows the damper to be locked in the closed position. This will include 1 damper lock spring.
  view full answer...
  
• Replacement Damper Lock for Ventline RV Range Hood
  The Replacement Damper for Ventline RV Range Hood part # BCA0472-00 is the damper located in the hood. If this is indeed the damper you are referring to then the correct lock spring is the Replacement Damper Lock Spring for Ventline RV Range Hood part # C0488-00. However, it sounds like you are referring to the damper in the exterior vent. If that is the case then we don't offer the locking tabs separately nor do I think they can be replaced so you will need to just replace the entire...
  view full answer...
  
• Does The Ventline Pinnacle Ducted RV Range Hood Come With An Exterior Vent
  The Ventline Pinnacle Ducted RV Range Hood with Light # VE33SR does not come with the exterior exhaust vent so you would need to pick up one separately. We currently offer three options, which I've listed below: Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 1-3/4" Collar - Black # V2111-55 Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 1-3/4" Collar - White # V2111-13 Ventline Exterior Wall Vent for RV Range Hood - Locking Damper - 5/8" Collar - White...
  view full answer...
• Replacement Exterior Wall Vent for RV Range
  While we do not have any type of parts lists or database for every year, make and model of trailer because trailer manufacturers do not keep those type of records I can go over each of our exterior wall vents for you to compare and see what might work for you. Each of the exterior wall vents we carry for range hoods will fit 10-1/2" wide x 3-3/4" tall rough openings so please be sure that is the size of the opening you have in your trailer. These exterior wall vents also require 10 screws...
  view full answer...

Do you have a question about this RV Vents and Fan?