Snow Plow Parts

Hey Scott, welcome back! The 26-5/8" Long 5-Leaf Slipper Spring item #e74SR are definitely going to be the best option. Thanks for taking a measurement with the unloaded weight! Don't get that too often. They're sold individually and…

Hello Jeremy, Thanks for reaching out. I do have a couple options that could work for what you’re looking to do, though I want to set expectations up front that one option isn’t available in black and the other depends a bit on how your trailer is…

Hey Chris, thanks for the part number. I was able to find that pdf online. Your Karavan 219-00059 slipper spring measures 27.125" long. The closest option I have to this is the 27" long 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer…

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

You can switch from a 5-Leaf #e74SR to a 7-Leaf #e37SR as long as you are replacing all your leaf springs. Do note the 7-leaf springs are going to be roughly 3/4" taller so you may also need taller U-Bolts like the #MR66ZR which are 7-3/4"…

Hey Daniel, Chances are your slipper spring has flattened out over time and is longer than it originally was. Typically an older trailer that may not have had its suspension replaced anytime recently is around an inch longer than it was originally.…

Slipper spring setups, like parts #e74SR and #APT6SE for 7K axles, do have different hanger sizes so what you'll want to do is cut off the older hangers and do some mock-ups of your new system before installing the hangers. Start off by mocking…

We do have a shoe for a Meyer snowplow with a 3/4" diameter shaft, the Replacement Shoe Assembly for Meyer Snowplow - Standard (Drive Pro) #3371303002. I have added a link to a video review with dimensions of this part for you to check out as…

The first step here would be to find the axle capacity so that you can get the correct capacity leaf springs. If there isn't any tags/stickers/labels on the axle to indicate the capacity then you can measure the diameter of the axle to figure out…

The Spring-Eye Bolt with Locknut for Slipper Springs #166079 is a total of 3-1/2" long. The measurement from the back of the head to the start of the threads is 2-3/4" and the length of the threads are 3/4".

The slipper spring hook of a slipper spring like part #e67SR attaches to the equalizer and the eye of the spring attaches to the hangers of Tandem-Axle trailer hanger kit part #APT6SE. I have attached a diagram of how slipper springs are setup. I…

Given the description, it sounds like you have a slipper spring suspension. The #e74SR springs you looked at are a likely replacement, but it's best to get a correct measurement. Generally speaking, you'll want to measure from the center of…

Hey Scott, welcome back! The 26-5/8" Long 5-Leaf Slipper Spring item #e74SR are definitely going to be the best option. Thanks for taking a measurement with the unloaded weight! Don't get that too often. They're sold individually and…

Hello Jeremy, Thanks for reaching out. I do have a couple options that could work for what you’re looking to do, though I want to set expectations up front that one option isn’t available in black and the other depends a bit on how your trailer is…

Hey Chris, thanks for the part number. I was able to find that pdf online. Your Karavan 219-00059 slipper spring measures 27.125" long. The closest option I have to this is the 27" long 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer…

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

You can switch from a 5-Leaf #e74SR to a 7-Leaf #e37SR as long as you are replacing all your leaf springs. Do note the 7-leaf springs are going to be roughly 3/4" taller so you may also need taller U-Bolts like the #MR66ZR which are 7-3/4"…

Hey Daniel, Chances are your slipper spring has flattened out over time and is longer than it originally was. Typically an older trailer that may not have had its suspension replaced anytime recently is around an inch longer than it was originally.…

Slipper spring setups, like parts #e74SR and #APT6SE for 7K axles, do have different hanger sizes so what you'll want to do is cut off the older hangers and do some mock-ups of your new system before installing the hangers. Start off by mocking…

We do have a shoe for a Meyer snowplow with a 3/4" diameter shaft, the Replacement Shoe Assembly for Meyer Snowplow - Standard (Drive Pro) #3371303002. I have added a link to a video review with dimensions of this part for you to check out as…

The first step here would be to find the axle capacity so that you can get the correct capacity leaf springs. If there isn't any tags/stickers/labels on the axle to indicate the capacity then you can measure the diameter of the axle to figure out…

The Spring-Eye Bolt with Locknut for Slipper Springs #166079 is a total of 3-1/2" long. The measurement from the back of the head to the start of the threads is 2-3/4" and the length of the threads are 3/4".

The slipper spring hook of a slipper spring like part #e67SR attaches to the equalizer and the eye of the spring attaches to the hangers of Tandem-Axle trailer hanger kit part #APT6SE. I have attached a diagram of how slipper springs are setup. I…

Given the description, it sounds like you have a slipper spring suspension. The #e74SR springs you looked at are a likely replacement, but it's best to get a correct measurement. Generally speaking, you'll want to measure from the center of…