Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 2-in-1 AC/DC distribution panel and converter charger keeps your power systems easily accessible inside the RV. Works with lithium and lead acid batteries. Uses a custom charging profile for lithium and multistage charging for lead acid.
Features:
Specs:
This RV power control center combines an AC/DC panel with a multifunction converter charger. Creating easy access to your electrical connections, this all-in-one breaker box distributes AC and DC loads to your RV and charges your batteries while connected to shore power. It's compatible with lithium and lead acid batteries.
The panel supplies AC and DC distribution to your RV's electrical system. The AC section includes space for up to 6 breakers rated for 240V at 50 amps. This lets you have up to 12 branch circuits when you use tandem breakers. The DC section has 18 branch fuse holders capable of using (4) 30 amp and (14) 20 amp fuses. Also, this section has lever lock connectors to make wiring faster and more secure. Simply open the lever, insert the wire, and close. You will need to purchase AC breakers and DC fuses separately to complete the installation.
Once all of your connections are made, the breakers and fuses are easily accessible by opening the door on the front of the box. The door also includes a blank label to list all of the connections.
The integrated converter charger changes AC shore power into DC power to charge your battery bank. It includes an output mode switch that lets you choose either lithium or lead acid batteries. No matter what type of battery is installed in your RV, you'll always have the most efficient charging profile. If your RV already has a stock converter charger, it will need to be removed to ensure this unit operates properly.
In lithium mode, the unit uses a higher output voltage, which provides a fast, complete charge. It also extends battery life since it utilizes the appropriate charging profile. Additionally, this mode is compatible with your battery's internal Battery Management System (BMS), which helps manage the charge cycle by monitoring the battery state and balancing cell voltage.
In lead acid mode, the Charge Wizard automatically switches voltages while your lead acid battery bank charges. This accelerates the charge but also helps extend battery life by adjusting the voltage during the different modes. This function is compatible with flooded lead acid, AGM, and gel batteries.
Charging Modes
The system includes a number of safety features. It has reverse polarity protection that will protect the converter if the battery is hooked up incorrectly. Additionally, the unit includes protection for overvoltage, undervoltage, and overcurrent, which can damage your equipment, as well as the converter. The built-in cooling fan also removes excess heat from the unit. The fan speed is proportional to the internal temperature of the converter, so when the power demand is low, the fan will operate quietly.
Alternate Instructions
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
Good product knowledge and blogs help to identify parts
So far so good, happy
Hooked it up and works great but there was some damage to one corner of box that it is mounted in.
The converter was for a trailer i was building . I have had it on shore power through many storms and it has not let me down once. I'm in Texas now with my trailer and it is still going strong . it runs 2 air conditioners around the clock. great product ,I would recommend for anybody
Product was to install and works great
So far the build quality looks acceptable. I will report back after the unit is installed. The addition of Wago terminals on the board is a very nice touch.
My coach batteries in my motorhome are now being charged. I ordered this replacement converter system after the one in my 9 year-old motorhome failed last week. Fortunately it was just the battery charger part that failed, so I was able to remove the battery charger part and install it in the intact power distribution part in my motorhome. It was easy compared to disconnecting all of the AC and DC wiring and replacing the whole converter.
Thank you etrailer for having the part I needed in stock.
Brooke M.
12/11/2024
Sounds like you did MARV-elous job with this! Its great knowing we could help you get your RV back to where it needs to be.
Just needed the converter. Took it out of panel, I went in my existing panel with ease. Curios what made mine quit in 21/2 years? Works perfect again now tho.
It was the perfect substitute for the regulator I had. The company should had an option to connect a generator to it, we had to improvise to connect it to the system.
Price was 150 less than the local dealer. Service was super! Ordered 4:30pm Wednesday, delivered Friday 1pm. Free shipping! The most amazing thing to me was the tracking. They show the steps to prepare and ship your order. Great company and great product! Will shop here again!
I asked for a replacement for my American converter and was told to get this one. What I wasn't told was that I would need a transfer switch at another $150.00 in order to accommodate a generator. The sales person should have known this. It wasn't until I got it installed that I realized this and that was too late to return it.
Install instructions were easy to follow. Worked perfectly for my airstream renovation. Small size and ability to mount sideways allowed me to put under my front bench seat and not take up valuable closet space.
Replace a dead unit in a truck camper. Works flawlessly.
It was fast service and easy to complete my order.
This unit was most similar to the one I had to replace on our '27 Komfort travel trailer. As suggested, I turned it on its side and resized the opening. My only concern was that the holes were oversized for plastic snap-in 1/2" stress relief connectors. Romex metal connectors with a securing nut was the best solution. Finished product looks great.
Mikee
5/9/2025
Well over a year and still working perfectly.
Just hooked everything up last night it took a few hours but I managed to get it in. I just hope it works after I fix my 50amp cord or get a new cord I believe everything is right might have to switch a few breaker wires but it looks amazing compared to my old one I feel like a professional electrician. An electrician wanted to charge me between 300 to 500 to hook it up. Glad I managed to do it. Out with the old one in with the new one. Thank you etrailer
Mike L.
8/5/2026
Looks like you did a great job, thanks for the photos!
Great product, easy install and quick s hipping.
I think I should’ve done this a long time ago. I love all the features with all the extra lights case fuse goes out, able to charge different batteries per simple to install.
Perfect, upgraded my 30 amp service to 50 amp and this distribution panel works great.
I have a old 1981 Front Range Trailer, with a 1981 convertor. It had to go and this will do the job nicely.
Was just what I was looking for for my 2007 Dutchman 5th wheel. Went form a deep cell battery to lithium and this was the only way to upgrade my converter/charger. Haven’t installed it yet but will be soon
Had one of these in my previous Intech Motorsports trailer. New Intech Lite Stacker only had 30 amp 120v. This was a nice upgrade to give us more room and flexibility in the future.
Heather A.
5/1/2026
Wow, the install looks great! What kind of motor bikes are you hauling?
I love my new PD4560 , I had to replace my old parallax & figured since it’s old system instead of replacing the converter I’ll just change the whole system. I highly recommend installing a new system in my 2009 Sierra Forest River. All my research paid off well because now I can go lithium & solar in near future. Thank you etrailer for excellent handling of my product.sending a couple of picts haven’t made my labels just yet so I still have to complete that. Also had to customize as old until was different size. Over all I’d say I did a beautiful job. Kudos to me
The unit was used to replace the 20 year old panel originally installed in the camper. Installation was fairly straight forward. We used it for the entire season without issue. I really enjoy the peace of mind provided by having a newer power center. The old unit had a separate inverter. The new unit is equipped with power inverter integrated into the panel. After slightly increasing the opening, the panel fit right in.
Rodney
6/28/2026
Still working well. Still pleased with the new unit and the peace of mind it provides knowing that I can depend on the electrical systems in the camper.
Kate F.
6/29/2026
The 60 amp panel has served my application well. I adapted it to replace the 30 amp AC/DV distribution panel in Our RV by cutting/shaving off the converter portion & removing a minor piece of wood in the RV. With that done I was able to do a quality installation with switched interconnects berween 2 DC/AC inverters, a DC Charger and a new Cummins diesel generation that replaced the OEM propane generation.
Heather A.
4/12/2026
That’s an impressive setup, sounds like you really dialed that system in. Adapting the panel like that and tying in dual inverters, a charger, and a diesel generator is no small project. That switch from propane to a Cummins diesel gen is a big upgrade too. What kind of RV are you running this all in?
Heather A.
4/15/2026
Do you have a question about this Power Converter?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John L.
6/24/2024
awesome, am still very happy with product