bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. No Cross Tube
THIS ITEM IS NOT A FIT FOR
2009 Toyota Camry
Draw-Tite

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Part Number: 24794
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$175.56
Retail:$279.50
You Save: $103.94
Trailer Hitch
Not Confirmed to Fit

2009 Toyota Camry

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

24794 - 200 lbs TW Draw-Tite Custom Fit Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24794 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (60)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 24794

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • No Cross Tube
  • 200 lbs TW
  • Draw-Tite
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Drawbar, pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24794 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60871 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24794 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Ratings & Reviews

4.8

60 reviews
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:
2008 Nissan Sentra

Fast dekivery and perfext fit



by:

Easy to order- easy to install- Looks good.



by:

this was the easist hitch to install i ever did



by:
2008 Nissan Sentra

Great product, instructions and service. Willb definitely use this company again.



by:

great hitch fits good no problems quick shipment



by:
2010 Nissan Sentra

Received item promptly. I found the receiver to be much easier to install than expected..



by:
2008 Nissan Sentra

Hitch fits great! Installation was a breeze. Fast shipping, all in all I'm a happy customer.



by:

product was as described and delivered ontime, will use etrailer.com again could not beat the price even with shipping cost
Thx Bo



by:

The product is great, it only took aboutan hour to install but I was more imprest with the customer service that I received from etrailer.com I was able to look at my shipment status online very easily and they sent me updated emails with it. They were very fast and professional with my order and delivery.



by:
2008 Nissan Sentra

Product on my 2008 Sentra



by:

Excellnet product... just got it yesterday and install it in 30 mins. Excellent service by etrailer by providing an installation video and super fast shipping.
Thanks!



by:

The product went in great and looks good. I had the hitch within 3 days of ordering and was very satisfied with the price I paid. I will say that if you are installing this yourself, use the etrailer video as your guide. The installation manual from DrawTite isn't good at all.



by:
2007 Nissan Sentra

Nissan sentra Hitch for SE-Rthe product is a good design, however i bought the hitch with the drawbar included and it seems to move around inside the hitch for some reason. the hitch opening has about 1ml of play on top and left side. other than that its a great product. and looks and fits great on my 2007 Sentra SE-R. I use it to haul around my atv and 4x6 trailer.



by:

Hitch installation was spot on with the video online. It took longer to remove the carpet and spare than the install itself. Also ordered the wiring kit at the same time. Simple plug-in install, other than running the hot wire to the front of the car. Total install took less than 2 1/2 hours.



by:
2007 Nissan Sentra

Installed on 2007 Sentra SE-Rthe hitch is excellent quality. solid and firm mount. very well designed. I installed it myself along with the wiring kit. The hitch install is easy if you have the tools. the video here is very helpful. i use it to tow my 4x6 trailer and atv around. works great, and looks great too. there really isnt anything i didnt like about this product... and it only weighs 25 pounds with the drawbar.



by:

Hitxh arrived within 3 days of order. Installat was quick and easy but it does take a few minutes of thinking before drilling holes in a 3 week old car.

The person that thought of the bolt puller or alignment tool (the helicoil-on-a wire thing) deserves a Nobel Prize. With it I didn't even need to jack up the car. Without it I would have had to get the car high enough to see inside the support.

I will recommend you folks to friends



by:
2007 Nissan Sentra

This was the second of 3 hitches I have ordered from etrailer.com.I have been pleased with price, communication, and prompt delivery. When I need another hitch, I will probably come back to etrailer.com
Installation videos were very helpful and time estimates were accurate.



by:
Nissan Sentra

Nissan Sentra hitch with bike rackSome pictures I made using my new rack with the hitch I bought to etrailer.



by:

Pros: Very easy to install. The directions were explicit and the installation video was a great supplement.

Good welds.

Cons:

None

Notes:

Installation time was less than an hour.



by:
Nissan Sentra

Excellent product. Excellent service. Excellent instructions - installed in
20 minutes. Very beefy receiver. Now I can haul the bikes behind the Sentra rather than behind the RV. The RV is a diesel with a rear facing radiator and the engine heat exploded the tires on the bikes.



by:
2012 Nissan Sentra

This hitch was installed on a 2012 Nissan Sentra. The installation was easy. I did the work on the ground and did not have to lift the vehicle. The installation took me about 45 minutes. The distance from the center of the hitch pin holes was 7.25 inches. The distance from the bottom of the hitch to the ground was 9.5 inches.



by:

Excellent product, it sits under car, hidden i like that!! Price is good too. I bought it so i can tow my carpet extractor around city. I like how fast etrailer shipped the hitch to me. Also using the video i was able to instal l it and use it in 2 hours (keep in mind i did not have a lift at home :) ). Thank you etrailer for the fast and good service!!

Vasil Vasilev
Prisitine Affairs LLC
Orlando, FL

Vasil V. profile picture

Vasil V.

2/25/2014

1 year after my purchase i feel like i made the right choice. I like the products and use them almost every day. Cant thank enough to eTrailer.com for the opportunity !!! :Pristine Affairs LLCOrlando FL



by:
2008 Nissan Sentra

Super easy install! Drill 2 holes in the spare tire section, fish the bolt through the frame and DONE! The video mentions to pull the plastic rivets to pull away the bumper for wrench clearance (2008 Nissan Sentra). I was able to hang it without doing that. It takes longer to change your oil then it does to hang this hitch.

I Also bought the Swagman XTC2 bike rack. This thing is awesome! It holds my AM mtn bike and Road bike with no issues. Simple assembly and easy to mount your bikes.

Shipping came in on time and was packaged well! no damage, no issues. Shipping was free which is unbelievable for how big/heavy the box was.

I will definitely recommend this to my group of riders as its a quick one-stop-shop!



by:

I bought the hitch to carry 3 bikes from Toronto to southern Mexico where our family has lived for the past year. I’ve had no problems so far, and feel confident it will carry our bikes back when we return this summer and for future use as well. L I’d recommend this product for sure.



by:
2008 Nissan Sentra

took under a 1/2 hour to install.


25
60
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Availability of Pin and Clip for Bike Rack on 2011 Nissan Sentra With Draw-Tite Sportframe Hitch
    Hey John! Would you like to install the Draw-Tite Sportframe Trailer Hitch # 24794 yourself if possible? You could use ramps like the Caliber Vehicle Ramp Kit # CA24AJ to get under there and install it. You would have them if you need them for any other work in the future and it will probably cost less than the labor for the hitch installation. Regarding that hitch pin, it looks like the Reese Q-Slot Platform-Style 2 Bike Rack uses a threaded hitch pin. This won't be the standard pin and...
    view full answer...
  • Will the Draw-Tite Sportframe # 24794 Fit a 2018 Nissan Sentra
    We do have a trailer hitch that is confirmed as a fit for your 2018 Nissan Sentra but the Draw-Tite Sportframe # 24794 only fits Nissan Sentra models from 2007-2012. For your 2018 you need the Draw-Tite Sportframe # 24907 instead. You will also need wiring # 118582, a draw bar like part # 3593, and a hitch ball like 1-7/8" part # 19256 or 2" part # 19258. Be sure to follow any instructions in your owner's manual regarding towing with your vehicle.
    view full answer...
  • How to Carry Mobility Scooter with 2017 Nissan Altima
    You seem to already have an inkling of what you're going to run into. Because of the limited tongue weight capacity of a Class I hitch such as the Curt # C11352, the carrier used plus the scooter itself could not weigh more than 200 lbs. We don't offer any scooter carriers compatible with a Class I hitch, but there might be some out there. There are adapters that allow use of a 2 inch accessory in a class I hitch, but using those adapters lowers the hitch capacity by half to 100 lbs. What...
    view full answer...
  • Recommended Trailer Hitch for 2011 Nissan Sentra
    You can certainly install a trailer hitch on your 2011 Nissan Sentra for use with a hitch-mounted bike rack. I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24794. This Class I trailer hitch is custom designed and confirmed to fit your Sentra. I have even included an installation video on this very vehicle that you can watch for reference. This hitch will provide a 1-1/4 inch receiver that will accept compatible hitch-mounted bike racks and other accessories like cargo carriers....
    view full answer...
  • Recommendation for a Class I Ford Focus to Transport a Mobility Scooter on a Cargo Carrier
    You are correct that your 2012 Ford Focus sedan will only support a Class I hitch. However, I cannot recommend that you use your existing cargo carrier, that is designed to be used with a Class III hitch, in a Class I hitch receiver, for both compatibility and safety reasons. Many hitch manufacturers have modified the receiver portion of a Class I hitch to make it only compatible with Class I accessories. A stopper is installed in the Class 1 hitch, this shortens the length of a the receiver...
    view full answer...
  • Hitch and Bike Rack Compatible with 2012 Nissan Sentra
    The Yakima RidgeBack bike rack part is not going to fit your 2012 Nissan Sentra as it requires a Class II hitch and all that is available for your Sentra are Class I hitches like the part # 24794. The only safe recommendation I can make is to upgrade to a similar bike rack that is Class I hitch compatible. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use...
    view full answer...
  • Draw-Tite Class I Hitch Installation on 2012 Nissan Sentra SR
    Draw-Tite Class I hitch # 24794 is a confirmed fit on your 2012 Nissan Sentra SE-R and when installing it I recommend using either a corded AC powered drill or at least an 18V cordless drill. You'll need a 1/2-inch drill bit. The reinforcement plate is included with the hitch. I reviewed the installation instructions and the process consists of removing the spare tire, jack and rear fascia and drilling only two holes. Required tools are noted in the linked instructions. I also included...
    view full answer...
  • Ball Mount Will Not Fit Into Draw-Tite Class I Hitch, # 24794, On Nissan Sentra
    It sounds like the ball mount you have might be a Class II ball mount. The 1-1/4 inch size receivers come in two classes, Class I which is rated for 2,000 lbs. towing and 200 lb. tongue weight and Class II which is rated for 3,500 lbs. towing and 350 lbs. tongue weight. To keep a user from overloading a Class I hitch, Class II hitch accessories, such as ball mounts and several bike racks and cargo carriers, are designed to not fit. Manufacturers accomplish this by placing a stopper in...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendations for a 2010 Nissan Sentra SE-R
    Draw-Tite trailer hitch # 24794 will fit SE-R and non-SE-R models of the 2010 Nissan Sentra. I also checked with Draw-Tite and confirmed that it fits all models of the 2010 Nissan Sentra. I have linked the instructions and a video showing installation on a 2011 Model. If you are going to be using the hitch to carry bikes then make sure that the bike rack you choose is rated for use with a Class I trailer hitch. Class I trailer hitches are also limited to carrying two bikes at most. I...
    view full answer...
  • Best trailer hitch and bike rack for a 2008 Nissan Sentra
    We have two Class I Trailer hitch recievers to fit your 2008 Nissan Sentra. The Draw-Tite # 24794 fits the standard and SE-R models while the Curt # C11370 is only confirmed to fit the standard Sentra. I recommend the Draw-Tite, as Curt makes you use a support strap, # 18050 with their hitch. However, the Draw-Tite does require drilling to install. In general, swing-away racks are designed for larger 2" hitches and aren't compatible with Class I hitch receivers because they will take...
    view full answer...
  • Will Draw Bar 36065 fit a 2012 Nisssan Sentra
    There is a drawbar with 5" of rise that will work for you, but Draw-Tite # 36065 is for use with Class II hitches only, and is not compatible with your Class I hitch, # 24794. Instead, you could use the Curt # C45024, a Class I draw bar which also gives you 5" of rise and will have no problems clearing your bumper with a length of 9-9/16". For a hitch pin you would want # F-4, and the hitch ball you want would either be 1-7/8" ball # C40001 or 2" ball # C40018.
    view full answer...
    Image 1 for
  • Trailer Hitch Size Available For 2007 Nissan Sentra
    There is only a Class I trailer hitch with a 1-1/4" receiver for a 2007 Nissan Sentra: - Draw-Tite Sportframe Trailer Hitch Receiver # 24794 This hitch has a 2,000 lb towing and 200 lb tongue weight capacity, and is a great hitch for something like a bike rack or cargo carrier, but a heavy dirt bike is likely going to need a different vehicle.
    view full answer...
  • Trailer Hitch to Carry Bikes with a 2010 Nissan Sentra
    To carry bikes on your 2010 Nissan Sentra I recommend the Draw-Tite trailer hitch # 24794. It is the most popular hitch option for your Sentra. This trailer hitch has a 1-1/4 inch receiver opening and is rated as a Class I. Because it is a Class I trailer hitch you will need a bike carrier that is rated for use on a Class I trailer hitch and you are limited to carrying a maximum of 2 bikes. For a compatible bike carrier that meets those requirements I recommend the Swagman Trailhead #...
    view full answer...
  • Can a 2 Inch Ball be Used on a Class I Trailer Hitch for a 2008 Nissan Sentra
    You can use a 2 inch ball with a Class I trailer hitch. The ball shank has to have the proper dimensions to fit the correct ball mount for the hitch. On Draw-Tite trailer hitch # 24794, the correct ball mount is # 3594 and for a 2 inch ball you would use # 19258. Even though this ball is rated for 3,500 pounds, you are still limited by the capacity of the hitch (2,000 pounds) or the vehicle (check owners manual) whichever is lower. You will also need pin and clip # PC2. On a Class I hitch...
    view full answer...
  • Trailer Hitch and Wiring for a 2012 Nissan Sentra
    Draw-Tite trailer hitch # 24794 is designed to fit the 2007 to 2012 Nissan Sentra including SE-R models so it will fit your 2012 model. I have included a link to a video showing an example installation of this hitch for you. If you plan on doing some towing the correct ball mount is # 3594. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. And for trailer wiring use # 118470. I have linked a video showing installation of the wiring as well. If you want to use the hitch for...
    view full answer...
  • Tongue Weight and Towing Capacity of Draw-Tite Class I Receiver Part # 24794
    The folks at Draw-Tite assure me that the Class I receiver you mention, part # 24794 is rated at 200 lb tongue weight/ 2000 lbs towing. This has been confirmed through extensive testing. You will want to check your owners manual to determine the actual towing capacity of the vehicle, and abide by whichever figure is lower. If you were planning on using the hitch for towing a small utility trailer, you might also need the following: A ball mount Wiring harness with 4-pole trailer connector,...
    view full answer...
  • Curt Hitch C11370 and Draw-Tite Hitch 24794 Capacity Comparison for the 2008 Nissan Sentra
    Other than the fact that they install a bit differently, and the Curt model isn't compatible with the SE-R model, both hitches are similar with the same 2000 lb towing/200 lb tongue weight capacity. If you'll be using the hitch as an attachment for a hitch mounted accessory, you'll want to use the Draw-Tite model, as Curt's warranty requirements stipulate that a # 18050 support strap needs to be used for all non-trailer loads. The Draw-Tite doesn't have that requirement. You may also...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendations for a 2008 Honda Odyssey and 2007 Nissan Sentra
    The Thule Platform OutWay Trunk Mount Bike Rack, # TH65JV, and a host of other trunk mount bike racks will fit the 2007 Nissan Sentra. But, there are no trunk mount bike racks that will fit the 2008 Honda Odyssey because there are not enough safe attachment points on the van for a trunk mount bike rack. Sine you are looking for something that will fit both vehicles, the best option is going to be to equip trailer hitches on both vehicles and use a hitch mount bike rack. Starting with...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<