bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class III
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13103
In Stock
$266.69
Retail:$449.40
You Save: $182.71
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13103 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (16)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13103

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Standard 2" Receiver: Works with ball mounts, bike racks, and cargo carriers
  • Tows up to 3,500 lbs (GTW): Handles small campers, boats, or utility trailers
  • Holds up to 350 lbs (TW): Supports common hitch accessories with stability
  • Bolt-On Design: Installs using standard tools with included hardware and instructions
  • Rust-Resistant Finish: Gloss black powder coat over base coat helps prevent corrosion
Made in USA

Features to know about

Tackle Everyday Hauling with Confidence: Class III Strength for Light Towing

This hitch is built for the kind of towing most folks actually do — small campers, boats, or utility trailers. With a 3,500-lb maximum gross trailer weight and 350-lb tongue weight rating (the same when used with weight distribution), it delivers solid capacity for everyday jobs. The fully welded steel construction and precision, robotic welds add strength and durability you can count on.

Mount Your Gear with Ease: 2" Receiver for Bike Racks and Cargo Carriers

The 2" x 2" receiver opening gives you full flexibility to use ball mounts, bike racks, or cargo platforms without needing adapters. It’s a Class III hitch made for real-world use, whether you’re hauling tools, taking bikes out on the weekend, or adding extra cargo space for a trip.

Simple DIY Installation: Bolt-On Design with Included Hardware

You don’t need to be a pro mechanic to install this one. The hitch bolts directly to the frame — no welding required — using the complete hardware kit that’s included. It lines up with factory mounting points for an accurate fit and dependable alignment, making it a great weekend project in the driveway.

Built to Last Through the Seasons: Powder-Coated Steel Resists Corrosion

The gloss black powder coat finish over a protective base coat gives this hitch long-term corrosion resistance while keeping it looking sharp under the bumper. The coating helps protect against rust and wear from road debris, so it stays solid even after years of towing or carrying gear.

Specs

Receiver Opening

  • Size: 2" x 2"

Class Rating

  • Rating: Class III

Weight and Capacity

  • Maximum gross trailer weight: 3,500 lbs
  • Maximum GTW when used with weight distribution: 3,500 lbs
  • Maximum tongue weight: 350 lbs
  • Maximum TW when used with weight distribution: 350 lbs

Warranty

  • Limited lifetime warranty

13103 CURT Class 3 Trailer Hitch Receiver

Installation Details C13103 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.4

16 reviews
Review sort icon
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:



by:



by:



by:



by:



by:



by:

Every box and hitch comes to the house Destroyed!



by:

Amazing product



by:

It looks good, havent installed it yet.



by:

easy assembly great product!



by:

Received hitch in a couple of days and guess what it fit !!! An easy install it took about an hour including picking up tools. It was nice to get a quality product. Thanks



by:

Heavy duty fit great instructions were a little confusing but figured it out



by:

I purchased this for my Mercedes R350 so I can tow a light trailer. Within an hour I had it installed. Easy as 1,2,3!

Very solid hitch.



by:

It’s a trailer hitch, what do you want me to say.



by:

Product seems in good shape although a bit heavy weighted (hoping it does not mean too much to my MB R350). Overall, shopping experience was perfect yet the package was received broken probably since product was loose inside the box (pictures attached)



by:

This is my second hitch and just as easy install as the first. Great product, Great Quality and Most Excellent Service from etrailer!

Thank You,
Jeffrey


16
16

See what our Experts say about this CURT Trailer Hitch

  • Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel
    Hey Ron, we have the Curt hitch part # C13103 that is a fit for your 2009 Mercedes R320 diesel. Now do you have any trailer wiring currently? If you have nothing you would need to start with a 4-way which for that we have the # 119250KIT and then convert to a 7-way with the # ETBC7 and then a brake controller like the P3 # 90195 and you'd have everything.
    view full answer...
  • Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103
    I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have the diagram that you need.
    view full answer...
  • Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103
    You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz. There is some cutting required, but the cut areas are under the vehicle and will not be visible when the hitch is installed. If you have a vehicle with cross bracing member, and in 3 places, if your vehicle does not have the cross-bracing members. The installation instructions, see link below, show exactly where to cut the plastic trunk pan and explain...
    view full answer...
  • Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103
    I spoke with my contact at Curt and he informed me that the underbody panel needs to be removed before installing the Curt Trailer Hitch Receiver, part # C13103, on your 2008 Mercedes R350. He said that although there are only 4 bolts holding the fascia, the underbody panel is held in place by 7 plastic pins, or bolts, so caution needs to be used when removing these. I have attached the installation instructions for the C13103 hitch.
    view full answer...
  • Trailer Hitch for a 2012 Mercedes R350 BlueTec
    Curt trailer hitch # C13103 is listed as a fit for the 2012 Mercedes R350 BlueTec models. The installation is fairly straightforward so a trusted mechanic or RV dealer that has a service center could perform the hitch installation for you. For wiring, we have the ZCI No-Splice Wiring Harness, # 119250KIT, that will fit your Mercedes. I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
    view full answer...
  • Hitch Fit for 2006 Mercedes-Benz ML500
    Unfortunately, the hitches we offer for a 2006 Mercedes-Benz ML500 aren't compatible with vehicles that have the air-ride suspension option. I wish we had better news for you. If you were needing the hitch to provide a mounting point for a bike rack, you could use a hatch mounted bike rack like the Thule Gateway 2-bike model, part # TH88VR or the 3-bike model, part # TH78VR which would be a good alternative to a hitch mounted bike rack.. I've linked to a product demonstration video featuring...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for a 2006 Mercedes R350
    For a hitch for your 2006 Mercedes Benz R350 we do have the part # C13103 as a fit like you have determined. Now for wiring we have universal wiring kits like the part # C56236 which are a confirmed fit. Or, if you wanted a wiring harness that does not cut into the wiring of your vehicle at all we have the ZCI part # 119250KIT which would also work well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a...
    view full answer...
  • Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDI
    For your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006 MB we found that from the top of the hitch opening down to the ground measured 10-1/2 inches.
    view full answer...
  • Trailer Hitch Recommendation for a 2012 Mercedes Benz R350
    The Curt Hitch part # C13103 that you referenced has been confirmed as a fit for your 2012 Mercedes Benz R350 so it would work well for you.
    view full answer...
  • Availability of Hitch for 2006 Mercedes R500
    We offer two different Class III hitches that are a fit for your 2006 M/B R500. Both the Curt # C13103 and the Draw-Tite # 75470 offer a 3500 lb towing/ 350 lb tongue weight capacity, but the warranty requirements of the Curt hitch stipulate that a stabilizing strap like # 18050 needs to be used for non-trailer loads like bike racks or cargo carriers. Because the Draw-Tite hitch has no such stipulation, I would recommend the Draw-Tite over the Curt hitch. I have linked you to the installation...
    view full answer...
  • Wiring Kit Compatible with 2011 Mercedes-Benz R-Class
    The answer you referenced is from early 2015 and will be updated because we have since learned the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT is a fit for your 2011 R-Class Mercedes-Benz. The zero contact interface uses sensors to capture the signal on your wires so they are uninterrupted and yet the powered modulite can transfer the signal to your trailer wiring functions. It is a great option for you if you...
    view full answer...
  • Trailer Hitch For A 2009 Mercedes-Benz R350
    We do have a trailer hitch option for your 2009 Mercedes-Benz R350, but the # C13190 that you mentioned is not going to fit your vehicle. The correct hitch for the 2009 Mercedes-Benz R350 is the Curt class 3 hitch # C13103. This is a 2" receiver rated for towing 3,500 lbs and 350 lbs of tongue weight.
    view full answer...
  • Torque Specifications to Install the Curt Hitch Receiver C13103 on a 2009 Mercedes-Benz R-Class
    The M10 x 1.50 CL 10.9 fasteners will need to be torqued down to 45 lbs-ft and the 7/16" 59 lb-ft for the Curt Trailer Hitch Receiver # C13103. This is in line 8 of the instructions, we usually do not answer that question because companies like Curt often update and improve their torque specs, so always check the attached current specifications for the most recent recommendations in case they have been updated. This is a confirmed fit for your 2009 Mercedes-Benz R-Class. I have attached...
    view full answer...
  • Will the Curt Trailer Hitch # C13103 Fit on a 2010 Mercede-Benz R350 BlueTec Diesel
    I have checked with my contacts at Curt and the # C13103 is confirmed as a fit for your Mercedez-Benz R350 with Blue Tec Diesel option. This is a Class III trailer hitch that offers a 2-inch receiver opening and is rated for towing up to 3,500 pounds and a maximum tongue weight of 350 pounds. You may also consider the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT that will not require you to cut or splice into your vehicle's wiring system. This will supply a traditional 4-way...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924