Great for cabinets, toolboxes, and panels in your enclosed trailer, this piano hinge provides uninterrupted support for your door. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we take a look at the 72 inch long, one and a half inch wide steel piano hinge. Now this hinge will provide a nice sturdy continuous support along the length of your cabinet, your door, or your panel. These are great for oversized doors, trailer doors and entrance doors. What's nice about 'em is they'll provide more support than your multiple small hinges. Nice continuous design on 'em reduces stress on the hinge when it's used with heavier doors, and the hinge does rotate 270 degrees.
Just wanna zoom in and show you what we're talking about. So you can see if we rotate it back, it'll go about 90 degrees that way. And then it'll go 180 degrees fully the other way towards closed. So a total of 270 degree rotation for nice full opening and closing motion. This is a durable steel construction.
Uses an unplated no finish on it. And this is a weld on or bolt on installation. Now, if you do bolt it on it will require drilling holes into the hinge, and this part is made in the USA. Few specs on this, we're gonna first measure the overall length. If we go from one end, all the way to the other end is right at 72 inches or six feet total length.
The width on it, and the width will be measured with it in the open position like this, which is the widest part. Again we'll zoom in to get a better look at it. So the width of it is gonna be right at, one and a half inches wide. And a knuckle length, each one of these portions here is a knuckle. So the length of those knuckles.
We put a ruler on it, it's gonna be right at half an inch. And then the pin that goes through the hinge, the diameter on that pin is gonna be one eighth of an inch. But again, you can see it close that way, open up all the way that way. But that should do it for the review on this 72 inch long, by one and a half inch wide steel piano hinge..
Ratings & Reviews
Very rugged and heavy. I thru bolted it and created an indestructible drop down door. I do need to rebalance the spring assist due to the extra weight.
Great product, arrived packaged well and undamaged.
well made and exactly what I asked for.
Very fast shipping. Thank you
Worked perfectly! I used the hinge for a custom 3’ x 12’ attic staircase that uses a hoist to raise and lower the full size staircase.
Nice heavy duty hinge. We used them as a replacement for the rusted light duty hinge on our custom hunting camp trailer. Received them quickly and in time to installed before the 2022 deer season.
Well made heavy duty hinge. My application is for a cargo trailer door ramp. I needed a HD hinge as I am loading very heavy items in the trailer
Worked out great for my trailer build and made thing a lot easier for making a heavy duty tool box door in the v of a tag trailer
Very impressed with the quality this hinge. I had to repair my FlipBak tonneau cover. This hinge will provide superior security over the original piece of rubber that those tonneau covers use as a hinge.
Thanks for the excellent customer service.
Paula, On behalf of the team here at Standing Stone State Park, I want to personally thank you and your entire team for the first class customer service, prompt tax exemption processing and lightning fast shipping! Your customer service model and training should be replicated in all areas of e-commerce!
heavy duty!
This is the item I needed and it was sent out and received very fast, very pleased with the product here for my enclosed race trailer to help with my need after I had upgraded my trailer floors & ATP ramp door flap. Item was just as described in the video upon ordering off the website.
Thanks
Awesome thanks for your
It was exactly what I needed, heavy dut y.
I didn't use these for a trailer but I bought these to cut down and make hinges for armored vehicle doors and hinged windows. Very heavy duty and priced well. Difficult to find hinges, happy they were available through here.
Good heavy-duty hinge at a quality pric e.
Excellent product. Much stronger and thicker than what came on the trailer. Very pleased
This is the most heavy duty hinge I've ever seen and works great.
Heavy duty!
Nicely made product! Good customer service as well.
Very heavy duty I drilled and bolted hinge on works great should last forever
This was a repair hinge for a 16' cargo trailer ramp. We, the Genoa Fire Department, use the trailer for moving our cooking grills, tables, supplies, etc for fundraising events. The hinges we bought are much heavier-duty than the original ones that pulled out of the plywood ramps. We are very pleased with them. I drilled and lagged the hinges, didn't weld then. We are happy with the results.
This starts with an order on 5-7-24. The part was out of stock but did come in and was shipped on 5-29-24. Odd thing was the tracking # supplied only showed creation of a label. When it finally arrived, shipping tube bent, there was no part inside, nothing. I contacted etrailer and they sent another one out. Same thing happened with the tracking showing label only. Two weeks went by and still no part. I contacted etrailer again and was told that the USPS facility was having troubles and manually attempting to track packages. etrailer next contacted me and said they were going to use a different carrier and shipped it out on 6-21 through UPS. It arrived 6-22-24, shipping tube bent, but part had negligible damage and will work for my project. etrailer went to the extreme for this and I appreciate it.
It is everything I hoped for. Thank you. For some reason it was mailed in an 8’ tube. The tube was a bit damaged but the hinge was just fine. I will use it today
Regards,
Joe B
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.