LaSalle Bristol Sanitary Tee Fitting for RV Sewer System - ABS Plastic - 1-1/2" Hub

Video Transcript for LaSalle Bristol Sanitary Tee Fitting for RV Sewer System Spec Review

Michael: Hi there I'm Michael with etrailer.com.Today, we're going to take a quick look at the T fitting for your RV sewer system. This is going to connect a horizontal drain pipe to a trap arm or a vertical drain pipe, so that you can move waste out of your RV or motor home. Either configuration will work to allow that flow of your sewer contents.This is an ABS plastic piece. Our diameter of our inner hubs here is an inch and a half. That is for that inner ring. You can see there where our pipe is going to butt up against.

Our diameter of our outer ring here is closer to two inches. So it's going to be plenty of room to get one of those pipes pushed in here so that we can get all these matched up.One thing I would suggest, if you don't have some already, pick up some ABS solvent cement. No one wants a leaky connection, especially when we're dealing with our sewer system. So it's a good idea to get some of that cement, to make sure that everything is going to adhere and have a nice firm leak-proof connection.I do want to give you a few measurements to make sure this is going to work for your system. So our total width, we're right about four and a quarter of an inch.

Total height, a little bit difficult here with the angle of the camera, but it's right about three and a half inches tall in this configuration here.So overall a very simple product, but very important when you're dealing with your sewer system, because you want to make sure that your components aren't going to crack, aren't going to cause leaks. So I think this is going to be a great option for you, if you're wanting to connect a horizontal and vertical pipe for your sewer system. This is going to be a great piece for you.That's going to complete our look at the T fitting for your RV sewer system..