Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily attach a variety of accessories to the front of your GMC Yukon with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Fit was perfect, installed easy. Save $ when you do it yourself.
Good Product/Install, Loss of Ground ClearanceInstall directions were detailed and straight foward. Having the right drills, bits, and sockets make the project easy. I spent 1.5 hours verse the recommended 45 minutes as a non-professional installer. Very pleased with the product, but instead of having to trim any fascia, the lowest part of the receiver sits below the fascia, making this the lowest point of the vehicle. I was hoping the receiver would maintain the vehicles stock ground clearance, but it is just too low. I installed this to carry a portable mounted winch and it may be too low to do this job effectively.
I ordered my Front Receiver for my Suburban back in January and received it about 3-4 days later. I was extremley pleased with the order process. I finally got around to puting it on in March????
Installation was a breeze, you do have to drill 4 holes but it was no big deal. Then I thought the hard part was going to be fishing the bolt/washers into the drilled holes but it was a piece of cake and actually was kinda fun. The "fishing" lines provided in the kit were great and they are now in my tool box in case I ever need to go "fishing" again. The Hitch works great and makes moving my trailers around a snap.
I chose not to trim the front spoiler because it looks fine to me.
I also now have a really neat step to get under the hood and I am going to add a winch stand and other toys to it.
Thanks the product is great!!!!!!!!!
Here are a few pictures of the hitch on my 2012 Avalanche. The ones from underneath didn't come out as nice as I had wanted.
So far so good! Looks and feels like a high quality product, the welding looks great, everything was fabricated square and accurately. The first thing I did was remove the lower black fascia from my truck so it is easier to properly locate the hitch. Once properly located on frame of truck and mounting are holes are marked all you have to do is simply drill four 17/32" holes and fish bolts thru frame. The fish wire that is provided to pull the bolts through the frame was ingenious, someone was really thinking when they designed this. This was truly a breeze to install.
Product is great! Exceeds my expectations for ease of installation and performance. I removed the 3” spoiler completely vs cutting for hitch. The key is to “dry fit” in place and use a metal punch to mark all your drill holes. Wire bolt feeder worked great for installing bolts. I used the hitch to mount my eight pole rod & cooler holder for surf fishing.
Great company hitch came fast easy inst all
Super fast shipping,but could use better packing.Hitch actually made a large hole in box,UPS driver had me check to see if anything was missing.Easy install,but try finding a 17/32" bit. After seeing how big the front opening is I just used a 1/2" bit. I think it took longer to remove, trim and reinstall the front spoiler than the rest of the job. Looks great installed
Easy installation
Magnificent product! Installation was simple and easy! As far as the durability goes, we mounted two-75 pound E-Bikes on the Curt Front Mount Trailer Hitch Receiver-Custom Fit-2" and travelled a total of four thousand miles! I recommend this product! This is the second product I have purchased from etrailer and always a great experience!
Just set up for my plow set-up. Holds great and very strong.
Here are some pictures of my new hitch on my 2010 Chevy Suburban. It was received in great shape, instructions were very helpful and install was fairly easy. It was a pleasure doing business with you guys and a big thank you to George J
for his follow ups.
e-trailer service and shipping were fantastic! As far as the Curt front receiver for 2007 Tahoe, the product is very well made and the install took about 1 hour. The ground clearance is not good. Ground clearance on my 2007 Tahoe is 7 inches and the angle of approach is half what it used to be. Angle of approach with my receiver winch is unacceptable. I also purchased the Roadmaster 10,000 pound 6 inch high/low hitch adapter and that helps to get the winch up, but the receiver is still plowing through mud. If you have a 2007+ Tahoe, get the Curt front mount skid shield to avoid catching the receiver hitch on rocks or driveways. I'd rather have a receiver through the license plate area or higher for better ground clearance and no loss on angle of approach - so I'm looking to custom build one since I can't find a manufacturer that makes one.
I don't write reviews often
I wanted to share my experience installing C31012
Over the years I've purchased 6 or 7 hitches from etrailer. I had completely different experience this time. I don't recall seeing website comments that drilling was required or the expected install time..
Usually the website is accurate or maybe I just missed theses items.
So the install video for 2014 Sierra doesn't apply for 2017 and maybe later.
The CURT instructions also have the access hole wrong. Its the front hole.
There are no others.
Maybe mentioning a trick to put tape on threads before removing feeder. So easy to lose the bolt with a slip when raising the hitch into place.
What was most difficult was measuring for precisely drilled hole locations with off road skirt blocking frame to frame access.
My solution was to clamp hitch C31012 in position with 24" woodworker clamps.
Align the front holes and get the exact hole positions for the drilling.
The factory solution should be to tell CURT that making all 3 holes on both sides OVAL.
That provides a little margin for error.
Thanks
PS ......because I had the clamps, the install time was under 1 hour.
AND on my truck, NO cutting of bumper valance was needed
Curt products are always good. Yet to install this hitch, but sure it will work fine as my previous Curt front mount hitch which unfortunately would not fit my new truck.
I bought this for my 2016 Chevy 1500. We used a jack to hold the hitch in place to mark the drill spots. It had two holes already there so we drilled out 4 and up it went. Very easy! Within a couple of hours we were taking out e-bikes to the park.
Hitch was ordered, delivered in a timely manner. Suggest you offer 17/32 drill bits as I have visited Lowes, Home Depot, and 5 independent Hardware stores, no one has this size drill bit. I do not wish to use a readily available 9/16 drill bit, but may have too!!!
Another excellent product from etrailer! Works perfectly and was super easy to install. I recommend etrailer to all my friends and family
The hitch was as I expected. Went on with not much trouble The directions say to be careful when positioning the hitch after installing the bolts in the frame not to lose then up in the frame I just used my hot glue gun to hold them in place. Us eighty one year olds have to work smarter
Love it! It was very easy to install. 30 minutes max. The fish wire worked great. This will make it very easy to maneuver my boats into tight garage.
The instructional video made installation easy. It arrived quickly with everything needed for installation.
high quality product, mounted pretty easy. It was delivered quickly and in perfect shape. I would buy from etrailer again
Fast shipping, easy install. Pleasure buying from this company.
well buit hitch but mounted lower than the reviews had described.
Product fits & works great
Do you have a question about this Front Receiver Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Timothy S.
3/12/2018
works great. Makes carrying cooler carrier simple