Video Transcript for Feature Breakdown: Snap-Loc Tie-Down Anchor Kit

Today, we're taking a look at the Snap-Loc Tie-Down Anchor Kit. Now this kit let you anchor straps or ropes to wherever you need a tie-down point. This would be great for anchoring tie-down straps, where you need them on trucks, trailers, different types of racks, walls, ceilings, and floors. It includes two black E-Track anchors. Two rings that fit into the anchors and then you get a hardware kit. In this hardware kit you'll get four self tapping screws, four Allen screws, four flat washers and four lock nuts for your installation.

Now the anchors, which are just the black portion right here, these are made from thick 10 gauge steel with a durable black powder coated finish to resist rust and corrosion. I'll give you the measurements on these real quick. Overall length measurement. That's measuring edge to edge 5 3/4 inches width measurement 1 inch, the overall height measurement.That's how much it sticks up from the installation surface or how far it sticks out from the installation surface. That's 1/2 inch.

The holes this are 5/16 inch bolt holes. So 5/16 * 5/16. And then the holes are separated on center by 5 inches. Now it also comes with the rings. These can be removed from the base and you can use the E-Track anchors with other E-Track accessories.

Now these rings are designed to connect straps, rope or cable to the anchors and they have a usable space, inner diameter of an inch and a half. They easily engaged. So you lift up the lever, release it and it secures inside that track. The kit features a maximum load or break strength rating of 3000 pounds and a safe working load limit of 1000 pounds. Product's also made in the USA.

That's going to do it for today's look at the Snap-Loc Tie-Down Anchor Kit.