bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Powered Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118653
Our Price: $58.49
You Save: 55%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 1.01 lbs
Add to cart
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Custom Fit 118653
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. 1-800-940-8924 to order Tekonsha custom fit vehicle wiring part number 118653 or order online at Free expert support on all Tekonsha products. Great prices and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (213)
  • Q & A (0)
  • Photos

Tekonsha Custom Fit Vehicle Wiring - 118653

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Powered Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points in rear cargo area
    • Plug in T-connector
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
    • Powered module connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


  • Maximum amperage:
    • Stop/turn lights: 4.2 amps per circuit
    • Tail lights: 7.5 amps per circuit
  • 1-Year limited warranty


This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your rear cargo area, behind the tail lights on both the driver's side and passenger's side. You will need to remove the interior trim panels to access the harness.

Once you've plugged in the T-connector, find the 1-pin housing that is taped to the tail light harness on the driver's side and plug in the 1-pin connector on the T-One. Locate the fuse box under the hood of your vehicle and insert the provided 15-amp fuse into the 20A Trailer location.

Once installation is complete, the 4-way flat connector will be stowed in your cargo area.

It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.

ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.

With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.

118653 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Replaces 118481

Installation Details 118653 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Satisfaction Score:

Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118653

Average Customer Rating:  4.8 out of 5 stars   (213 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


We purchased this for our 2009 Murano LE so that we could tow our boat (we have a single cab truck so with kids it was just impossible). First off the first harness we got was installed no problem just followed right along with the video and all was fine….until the lights were blinking all incorrectly. Long story short here is the deal. I called etrailer and told them what was going on, with no hesitation they put another in the mail. That is customer service. These guys deserve 10 stars but I’m limited to five. The new harness was just fine and we have used it multiple times a week for the entire summer. Not a single issue.

Thank you to etrailer for good products but mostly thank you for going above and beyond with your customer service. You’ve got a customer for life here.



1 year review. We have continued to use this harness with a variety of trailers. It has continued to be flawless after a full year. Just get it. It’s a great purchase.

2011 Nissan Murano

Fit like a glove. Overall quality is excellent. I had already put etrailer hitches on two other vehicles I own. That’s the reason I went back to an etrailer hitch for my 2011 Nissan Murano. If you need a good quality hitch with excellent build quality and proper fit for your vehicle, you certainly can’t go wrong here. I can’t quite make the stars on the rating work right for me. I hope five stars is an excellent rating, because that is what I want to leave.

2014 Nissan Murano

I've installed other trailer wiring harnesses before so this time the installation was easy for me. It took more time to disassemble the panels in the back of my Nissan Murano (for the first time) and put everything back into its proper place than it did to hook up the trailer harness, secure all the parts and install the 15amp fuse in the fuse holder under the hood.

2010 Nissan Murano

Wiring Harness went well -Worked as expected- Directions for install are correct


Great value, worked well as stated..!

2011 Nissan Murano

Super easy install. Second harness I purchased from ETrailer.


Looks good, all seems to be legit ... unfortunately the trailer I ordered is on back or and I haven't been able to use it yet.

Will write more when I know more.


Nice looking and very easy install!


Harness was plug and play, thankful for the install video as it helped a ton and saved us time getting this hooked up.


This fit my 2013 Nissan marano perfectly. I used an old m12 bolt and cut the threads down the side with a cutoff wheel to clean the threads out. This worked perfectly.


Great service, received the hitch and the wiring harness sooner then expected.
They were the correct parts.
I read the reviews and tried to install the hitch without removing the muffler. It worked but you do need an extension for you socket set. The best part if installing were the videos that showed every step you needed to do. It made it simple.
The wiring harness went in easily and clipped as advertised. I would suggest they add a second self-tapping screw to mount the adapter and several ty-wraps to cinch down the wires coming across from the passenger side.
Over all, It was simple to install and looks and works great.

Richard A.


It works so well I dont think about it. Like factory install. No problems. Great product!

Nissan Murano

First, ordered this wiring harness on a Monday afternoon and requested 3 days shipping, then my wife called and said we were leaving on vacation Friday at 9am, which meant if my harness didn't ship Monday, it wouldn't be here in time. Called etrailer and
Katherine promised to get my harness to me, followed up that it had been shipped, and followed up again that it had been delivered! Funny thing is, I just attended a seminar at work on the difference between a satisfied customer and and loyal one, and Katherine's superb service and follow-up has not only made me a loyal customer, but I will 100% recommend to anyone looking for car accessories.

Now to my harness. When it arrived I took it to my Murano, sat my laptop in the cargo area and pushed "play" on the installation video. Watched each step, paused the video, and did each step. The video was perfect and showed exactly what needed to come out of the trunk, and the little tricks for removing each piece. In 45 minutes myself and my 6 year old son had it perfectly installed and it works flawlessly, so glad I didn't give the Nissan dealer almost $300 to do the same thing!!

I would have attached a pic of the installed harness, but It's 100% hidden, just the way I wanted it.

Thanks again etrailer!!

I would have attached a pic of the installed harness, but It's 100% hidden, just the way I wanted it.

Thanks again etrailer!!" />



Hello, please confirm that this works with a 2013 Nissan Murano, Thanks

Etrailer Expert

Rachael H.


Yes, this kit is confirmed as a fit for your 2013 Nissan Murano, as long as it is not the CrossCabriolet version. I have included a link to our confirmed products that fit a 2013 Murano for your reference.


Ordered hitch to match car (year,model etc). Added [other] wiring to order, wiring sent was for later model, had to reorder & repurchase and could not return wrong harness. Paul responded quickly, received harness quickly. Had to have hitch professionally installed. $xxx extra cost after purchase of hitch and harness.

2013 Nissan Murano

Courtney B in customer service was great, she even confirmed my order was delivered! Ordered the 87486 Hidden Hiitch with the T-One 118653 wiring harness for my 2013 Murano. Was delivered in 3 days. I chose this Harness because the max amp rating was the highest for my vehicle. Both pieces fit perfect, the videos were extremely helpful and made me confident I could do the install myself. The Harness directly connects to all factory wiring as shown in the video, the most difficult part is removing the interior panels. Which is not even that hard as it is shown in great detail in the etrailer video. It is a well built product with a custom fit for the Murano, if you need a Harness, this is the one!!



Harness is well designed, works flawlessly

2013 Nissan Murano

Easy to install plug and play


The wiring harness looked perfectly intact and properly installed according to the video provided, but when it was time to finally use the product and connected to the lighting of a trailer it didn't work. It's been 2 years since I have ever needed it for the job is needed and I was using a Uhaul Trailer. I needed to inform a buyer that I wasn't able to ship their item to them and lost a potential client. I definitely would recommend if it functions immediately and not wait several year before realizing it never worked in the beginning.

Etrailer Expert

Jenny N.


I recommend troubleshooting with the harness before considering the harness defective. With trailer unplugged from the harness you can check the ground and test the light functions with a circuit tester. This will be the quickest way to determine if it on the vehicle side or the trailer side. And proceed from there. We have a FAQ that can help.

2010 Nissan Murano

The harness arrived and fit perfectly in my wife’s 2009 Nissan Murano. This Murano has the power socket already in the back as well as the trailer fuse slot in its fuse box, so there was no stringing wire under the car and to the battery. The install procedure was essentially identical to the 2010 Murano video.

Very easy. It was harder to reset the car’s rubber door gasket if than to install the wiring. It took about 1.5 hours this first time but I could do it in 30 minutes next time.



Installation was a breeze and it worked fine, however have not towed anything since.


quick delivery, great price. What can I say it's a wiring harness. I will do more business with etrailer in the future based on this order since it is the first time I have ordered anything of this nature and I am very satisfied with my experience. My rating of etrailer is EXCELLENT. Everything went exactly as described in the video. Thank you etrailer.

Mike G.


As good as day one.


I wanted to thank you again for the quality of items you have. The item was easy to order and install. There’s so much stuff you carry that I’d love to order but I know where to go when I need to order. Thank you again. It’s nice to have a trailer hitch to pull whatever I need. You won’t be disappointed with your purchase.

Harry H.


I’m still very happy with the trailer hitch I bought and installed. It has helped me in many instances. It’s great to be able to connect to my trailer any time I need to instead of asking someone else for help. Thank you again.


Very easy to install. Basically just plug into vehicles wiring harness.

2009 Nissan Murano

Very simple instructions for the wiring kit. Took only 20 minutes to install after watching the video. Suggest routing trailer connection end through existing rubber grommet to keep wiring near trailer hitch just under the vehicle.

Etrailer Expert

Mike L.


The manufacturer specifically designed this particular harness so the connector would be deployed from the interior of the vehicle when needed. This way, the connector is protected from damage when its not being used. The rear hatch of your vehicle has weatherstipping thats thick enough that the wire for the trailer connector wont be damaged as long as you avoid the latch area. You can certainly install the harness as you described, but the connector will be exposed to the elements.

2012 Nissan Murano

Easy install for the most part...I did have to use my own self-tapping screw in the vehicle; this kit had a REALLY short screw...maybe 1/4" long, so anything worthy of a ground is thick metal through sheet metal in the cargo area of a '12 Murano. Still, it's plug-n-play on the rest. Instructions were pretty easy to read. Some minor tool skills will be needed, but not much more than that. All connectors were there to connect between the tail harnesses and I mounted the signal booster box under cargo storage. I did use a couple more plastic wire ties beyond the two tiny ones the kit had to properly stow the wires. The harness 4-pin connection is supposed to run across the rear hatch seal, which I don't particularly like, but is sufficient. I will be running the harness with a 4-pin harness extension through a rubber grommet/boot in the forward cargo storage under-floor area (rear cargo) on the driver's side so I can mount it direct to the hitch without digging this thing out every time. Otherwise, I fixed a problem on the trailer side when nothing worked (checked power with a multimeter on my side and all was working). There are two fuses supplied, so make sure you install them both (on the harness and one under the hood in the driver's side fusebox). It did take a little time for the harness to come in, as well. Recommended product...especially for the price! No problems and have used for quite awhile now. I debated on buying the more expensive choice as I know how cheaper can net some...interesting--or not compatible--results at times, but glad I went with this one. Cheers, and thanks!


The service was great - very knowledgeable assistance. We also received the product in a timely manner. I previously bought a hitch from them and it was great. We would definitely buy from etrailer again.



We really like the products. We used the trailer to put our things on for a family vacation last summer and everything was great! We have recommended your company to a few friends who are interested in buying a hitch for their car and or a carrier. Thank you for taking the time to write and check in.


Like others, I was able to install the hitch fairly quickly without dropping the muffler. That does require a socket extension. Some blocking too hold up one end of the hitch while fastening the other end to the frame is also required. As another reviewer noted, the hitch side which attaches where the tow hook is removed didn't line up exactly. I tried to spread it in place with a pneumatic spreader without success. Could have removed it and banged it out with a sledge hammer but decided that the two 12M bolts I was able to place on that side would be adequate and I might weaken a weld joint by banging it out. Took far longer to hook up the wiring than I thought it would, but I was also aiming for a factory-install look - zip ties everywhere, running the power wire under the driver-side rear storage compartment, etc. I would have liked a little more length on the wires leading to the 4-pin connector. It only reached to the receiver after I fastened the wiring "junction box" to the car body underneath the driver-side tail light. A drop hitch in the receiver could require longer wires on the trailer side. Could have done with less length in the wiring going across to the passenger-side tail light. Working the power wire to the engine compartment without a car lift wouldn't have been possible if I'd eaten lunch - not a lot of clearance under a Murano! I ran the wire along what I believe were brake lines. A straightened coat hanger with nylon cord and a person looking down from above the engine compartment to grab things as I passed them up from beneath worked well. While I was somewhat disappointed with the hole for the 10M bolt not lining up with the car frame, I believe the whole package is well worth the cost and would never pay what was being asked for the OEM alternative.

2009 Nissan Murano

The wiring harness was straight forward, and worked just as the installation video showed for my '09 Murano. The hitch fit perfectly. The weld nuts in my frame had rusted so that I had to tap the threads, which added a little time to the installation. I used a floor jack to lift the hitch into position while I got the bolts started. Otherwise, I would have needed a helper to get it up into place. Shipping took two days. There was a two-week lead time to have the local hitch shop do the work. I saved nearly two weeks of time and $160 by doing the work myself.

Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • T-One Wiring Harness for the 2009 Nissan Murano
    You are correct in that the T-One Wiring harness for the 2009 Nissan Murano, item # 118653, does not alter any existing wire on your Murano. It will plug inline with the connectors that are already present behind your taillights. You will need to run a power lead to your battery and ground a wire, but that will not require you to cut any existing wires on your vehicle.
    view full answer...
  • Circuit protection for a 2009 Nissan Murano and Factory Warranty
    The # 118653, T-One Connector with Upgraded Circuit Protected ModuLite is a circuit protection system that will protect your vehicle and the converter from electrical shorts or trailers that are wired incorrectly. Installation is when you need to be careful, make all the connections properly and have the negative battery cable disconnected so that you do not short a circuit in the vehicle. Once installation is complete your vehicle is protected and safe. I have not heard of any problems...
    view full answer...
  • Does a Trailer Wiring Harness Power Wire have to Connect to Battery on 2012 Nissan Murano
    For a wiring harness that requires a direct connection to the battery, like # 118653, for the 2012 Nissan Murano, the harness will not work unless the battery connection is made. The trailer lights get their power from the battery so if not connected the trailer lights will not work. The harness has not been tested for any other connection and is not rated to connect anywhere but the battery. Connecting it anywhere else, since not tested, would end up voiding the harness warranty. Routing...
    view full answer...
  • Connecting the Power Wire from Wiring Harness 118653 on a 2014 Nissan Murano
    You might be looking at the power distribution box which is normally located near the battery on a Nissan Murano. There should be a large battery terminal with a red cover over it and the traditional large gauge wire clamped to it. You can connect the hot lead from wiring harness # 118653 to the nut on the clamp.
    view full answer...
  • T-One Connector for a 2009 Nissan Murano Works with the LED Light System
    Yes, the T-One Connector w/Upgraded Circuit Protected ModuLite - Nissan Murano, part # 118653 is a new product designed specifically for the 2009 Murano model. It has been engineered to work with the LED light system present on the new Muranos.
    view full answer...
  • Installing Trailer Wiring Harness # 118653 in a 2010 Nissan Murano
    When wiring the T-One Connector w/Upgraded Circuit Protected ModuLite, # 118653, the converter requires a direct connection to the vehicle battery via a plug and wire that is already present at the back of the vehicle. If it is not connected to the battery, it will not work. The power from the trailer lights comes from this connection. You will not have to manually route any wiring for this power wire connection.
    view full answer...
  • Is Trailer Wiring Harness # 118653 Compatible with LED Tail Lights on a 2011 Nissan Murano
    Yes, the T-One Connector, # 118653, is a powered converter meaning it gets the power for the trailer lights from the battery and only needs the signal for the vehicle tail lights so there will not be excessive draw on the vehicle wiring.
    view full answer...
  • Troubleshooting Brake and Turn Signals Not Working After Installing T-One # 118653 on a 2014 Murano
    I would first use a circuit tester like part # 3808 to test the T-One # 118653 on your 2014 Nissan Murano. If you are showing that the 4-Way is sending the signals then the problem is on your trailer side. Look for loose grounds and damaged wiring and replace as necessary. Your grounds should be secure and connected to a clean, bare-metal surface to avoid shorting out. Let me know if you are still experiencing problems and I can help you troubleshoot further. I have also attached a troubleshooting...
    view full answer...
  • Trailer Wiring Recommendation for a 2012 Nissan Murano
    We have the best luck with the Tow Ready wiring harnesses over the Curt ones. The converter boxes on the Tow Ready harnesses tend to last longer and have fewer issues so for your 2012 Nissan Murano I would recommend the Tow Ready Wiring Harness part # 118653. You have to run the wire to the vehicle battery so that you can bypass the delicate taillight wiring of your vehicle and not have to worry about damaging anything on your vehicle in the event of a short on the harness.
    view full answer...
  • Trailer Wiring Recommendation for a 2009 Nissan Murano
    Both the Curt Trailer Wiring Harness # 55571 and T-One Wiring Harness # 118653 are compatible with LED lights. The T-One is now fully updated to accommodate LEDs. Both Wiring Harnesses do the same task, however, I recommend the T-One Harness over the Curt Trailer Harness. We have the best luck with the Tow Ready T-One wiring harnesses over the Curt harnesses. The converter boxes on the Tow Ready harnesses tend to last longer and have fewer issues than the Curt wiring harnesses. I have...
    view full answer...
  • Is Connecting Tow Ready Trailer Wiring Harness to Battery Required on a 2013 Nissan Murano
    On the Tow Ready trailer wiring harness # 118653 you do need a direct connection to the battery. There may be other 12 volt power sources but the harness is not tested with or rated for use with these other locations. Also by connecting to the fuse panel this person has lost that level of isolation between the trailer wiring and the vehicle wiring. There are different ways in which a power wire can be ran to the battery. Running the wire under the vehicle is one method it is the quickest....
    view full answer...
  • Comparing Trailer Wiring Harness Options for a 2014 Nissan Murano
    The trailer wiring harness options for a 2014 Nissan Murano all pretty much do the same thing and will work well for you. That said, I do prefer the T-One Vehicle Wiring Harness part # 118653 as the converter box is designed a bit better. It's smaller so easier to mount, has a tab for screw attachment which helps with longevity, and the potting which holds the wires on the board inside is much more durable. In summary, we have better experience with the T-One compared to the T-Connector...
    view full answer...
  • Trailer Wiring Harness Recommendation for a 2010 Nisan Murano
    The difference is the pin locations. The # 118480 and # 118481 are very similar. So much so that they share the same connectors so either would plug into either of your vehicles. But since the two vehicles call for two different pin outs on the connectors a second harness was made. Long story short, for your 2010 Nissan Murano you will have to install the # 118653.
    view full answer...
  • Trailer Brake/Turn Signal Lights Not Working with Wiring Harness 118653 on a 2011 Nissan Murano
    It sounds like there is a bad ground connection somewhere. The first thing to check would be the converter for the wiring harness # 118653. Make sure that it is grounded to a clean metal surface. Use a circuit tester like # PTW2993 if needed to test the wires going into the converter for the proper signals. If they are not correct then there is a problem with the connections to the vehicle such as a bent pin, or a problem with the vehicle wiring. If the signals are correct going into the...
    view full answer...
  • Does Curt Hitch # 13577 Fit 2010 Nissan Murano with Aero Kit
    I checked with Curt just now and they have their hitch # 13577 as a confirmed fit for all models of the 2010 Nissan Murano so this hitch will fit yours with the factory Aero package. We haven't had the chance to install it on an Aero package vehicle, but we still know it will fit. I attached a picture that shows the trimming a customer had to do to their Aero bumper though. I attached an install video for this as well. If you needed trailer wiring as well you'd want # 118653 which is a...
    view full answer...
    Image 1 for
  • Troubleshooting 4-Pole Trailer Wiring
    4-pole trailer wiring does use a standardized format, which has running/clearance light signals on the brown wire, and combined right stop/turn light signals on the green wire and combined left stop/turn signals on the yellow wire. The linked article on trailer wiring shows the various wiring connectors in use on trailers and the functions on each wire/pin. If the trailer was re-wired it is possible that replacement wire of a different color was used. This is why it is generally best to...
    view full answer...
  • Dead Battery in 2012 Nissan Murano After Installing TowReady T-One Wiring Harness 118653
    First I suggest you test the output from the 4-pole flat connector to verify normal operation of the module. You can use a circuit tester like # PTW2979 to do this testing. The video shows how to use it. Disconnect your trailer, ground the tester to the vehicle, and test each pin one at a time. The pin for the yellow wire should carry an intermittent (blinking) left turn signal when the Murano left turn signal is engaged. The green should carry an intermittent right turn signal when it...
    view full answer...
  • Recommended Trailer Hitch and Wiring for 2011 Nissan Murano
    Starting with the trailer hitch for your 2011 Nissan Murano, the Curt Class III Round Tube Receiver Hitch # 13577 referenced in your question is confirmed to fit this vehicle and is a great choice. This will provide a 2 inch receiver with a towing capacity of 4,000 pounds. I have attached an installation video on your Murano that you can use for reference. As you mentioned, both the Tekonsha T-One Vehicle Wiring Harness # 118653 and the Curt T-Connector # 55571 are confirmed to fit your...
    view full answer...
  • Recommended Trailer Wiring Harness for 2011 Nissan Murano
    For your 2011 Nissan Murano, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118653 as long as your vehicle is not the CrossCabriolet model. This harness is custom-designed for your Murano and will install by simply plugging the T-One connector to the existing ports located behind the trim panels in the cargo area on the driver and passenger side. This will provide a 4-Way connector on the vehicle to hookup to your trailer and power its rear signal lights. I have attached an installation...
    view full answer...
  • Troubleshooting Non-Working Trailer Wire Harness For A 2011 Nissan Murano
    It sounds like the converter box on your trailer wire harness is bad and you harness just needs to be replaced. This is pretty normal over time so before you waste money having someone else retest everything and then charge you for a new harness you can just order one yourself. I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118653. This harness comes with plug in connectors for your 2011 Nissan Murano to make installation fast and easy. The Tekonsha brand...
    view full answer...
  • Recommended Replacement Malone Saddle Covers For Kayak Carrier
    We do sell The Malone SaddleUp Pro Kayak Carrier with Tie-Downs - Saddle Style - Rear Loading - Clamp On # MPG110MD which comes with the saddle covers included but we do not sell them by themselves. You would have to purchase the complete kit. I attached a review video link below.
    view full answer...
  • Which Hitch Will fit on a 2013 Nissan Murano?
    There are three hitches that are confirmed fits for your 2013 Nissan Murano, including the Curt Trailer Hitch Receiver - Custom Fit, # 13577. This hitch will fit on your Murano even if it is a CrossCabriolet, whereas the other two hitches will not. You will also need a wiring kit, and I recommend the ModuLite Circuit Protected Vehicle Wiring Harness # C59236 if your Murano is a CrossCabriolet, and the T-One Vehicle Wiring Harness, # 118653, if it is not.
    view full answer...
  • Trailer Wiring Recommendation for a 2012 Nissan Murano
    If they used a hardwire Curt harness, it was probably # C59236. It uses a 10 amp fuse but if the fuse is blowing when no trailer is connected something must be wired wrong or there is a short somewhere where the wires from the converter are connected. I recommend going with a T-connector like # 118653. This system plugs in line with the vehicle tail light wiring and also requires a direct connection to the battery to provide the power for the trailer lights. The benefit of the T-connector...
    view full answer...
  • How to Install a Brake Controller and 7-Way Wiring Harness on a 2014 Nissan Murano
    In order to tow a 2014 Casita travel trailer with your 2014 Nissan Murano you are going to need a 4-way wiring harness, 4 to 7-way wiring harness, and a brake controller. For the 4-way harness I recommend using the T-One Vehicle Wiring Harness part # 118653. This is a complete plug and play option that is a confirmed fit for you so long as you do not have the CrossCabriolet edition. For the 4 to 7-way wiring harness I recommend the Universal Installation Kit for Trailer Brake Controller...
    view full answer...

< Previous

Do you have a question about this Custom Fit Vehicle Wiring?

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Andrew S
Test Fit:
Andrew S
Employee Kathleen M
Video by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.