T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118344
Our Price: $29.70
Confirmed to Fit
1998 Lincoln Navigator
without factory trailer connector
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (151)
- Q & A (0)
- Photos
1998 Lincoln Navigator - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- 4 Flat
- Trailer Hitch Wiring
- Tekonsha
- No Converter
Quickly and easily install a 4-way trailer connector on your Lincoln Navigator with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points behind tail lights
- Plug in T-connector
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove either the tail light assemblies or interior trim panels to access this harness.
Once installation is complete, the 4-way flat connector will be stowed either in the jack storage compartment of your cargo area or beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure if you are mounting it near the hitch.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
118344 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Product did not meet expectations
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118344
Average Customer Rating: 4.9 out of 5 stars (151 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.by: David 10/15/2023
This trailer harness has performed perfectly over the past 12 months. I would definitely recommend it to others.
by: Derwin05/20/2023
This website is awesome. The amount of accessories that you can find for one model is amazing. And for each of those parts there are informational videos on how to install it.
by: Rusty 07/10/2021
1998 Ford Van
Product arrived very quickly and was very easy to install. I was absolutely dreading wiring the trailer little on this van and this harness made the job very simple!
by: Michael 03/09/2023
It's a nice harness
by: Joseph07/07/2023
seam like it took a long time to get product after it was order
by: Paul Wilcox08/09/2014
I had put off wiring my van for a harness to go with my trailer because just the idea of running wires and tapping in to the right places, testing it all and sealing it back up was full of concern if I would get it right, how much time it would take, ... I was thinking just how frustrated I might become and so I put it off over and over again.
Then I found your site and your information. I looked up my vehicle and the part I needed. I called your number and spoke with a very helpful customer service representative. She looked up the instructions and even read part of it to me. She said the harness has two leads that just go between your tail lights and the wiring from your vehicle. They just plug right in.
I ordered the part with 2 day shipping and it came right on time. Installation was a snap. I was probably done in 15 to 20 minutes in all and the trailer lights work perfectly. The job I needed to do the next day was a breeze because I now had access to the trailer with confidence.
I even went to the store I bought my trailer from and told them about you all so they could tell other people.
Thanks for being so helpful and providing such a great product!
Paul
by: Jill R.08/01/2014
2002 Ford Ranger
I love it. Went all over town looking for help with the trailer light hook-up truck side for a 2002 Ford Ranger. I was told that the truck was factory pre-wired and there was nothing that could be done but follow the wires to find the problem and then fix the problem. Cost about $75.00. Called etrailer and they told me how to do the repair without the hassle. Ordered the part, fixed it in about an hour. Thanks etrailer. You saved me about $50.00. The harness was easy to use, just open up the lights and snap in the plugs.
by: Kevin M.10/08/2019
Used this to tap into my turn signals for my snow plow. The wire loom was very short next to my turn signals and this allowed me to tap into the tight bend with plugs instead of splices. These will keep the connectors from corroding. I am glad I found these for my Excursion, it saved a lot of frustration of trying to splice in tight areas. I highly recommend these for any project. Well worth the money.
by: Darrick H.09/11/2017
First off with all the information available to you on the etrailer website it would be hard to buy the wrong parts. With that information I already knew what needed to be done before my wiring adapter came. The instructions were also easy to understand when i looked at them. The adapter easily plugged into the back of the tail lights just as described and my trailer lights worked perfectly. From order, to emails about my order to a quick delivery this could not have been any easier. This is my third time ordering from etrailer and I always look at there website when I need to set up for towing. Sorry no pics job was to easy.
by: Lynus O.08/21/2017
1997 Ford Van
I've bought a tow hitch and parts for a boat trailer I was building. These guys have the best service, the cheapest price, and the highest quality parts. I would rather wait the couple days it takes to get my order and have it right than to have to scurry from store to store dealing with some sales person that has a whole 8 hours training (maybe) trying to find what you need. Anyway, etrailer solves that problem. Thanks
by: Russell09/02/2014
1997 Ford F-150 and F-250 Light Duty
The running lights on my trailer would not work because of a short in the wiring harness on my truck. I purchased this harness from etrailer which took about 20 minutes to install. Now all the lights are working on my trailer. I would definitely recommend this product.
by: Mark12/03/2019
Easy to Install. Works great. Just needed a tie-wrap to fasten trailer connector to truck body to keep it from hanging down. I bought one earlier and tried just wrapping the wiring around a brace, but it worked loose and tore off. No problems now.
by: Gator05/30/2019
Ford
I would have given it 5 stars but the connectors were not correct for my vehicle. This claims to fit a 2002 Ford Sport Trac but my plugs are slightly different. I had to modify this connector a bit which slowed what would have been a quick easy install. Ford may have used slightly different connectors on certain Sport Tracs that year but the manufacturer of this connector should be aware. Fortunately it was just ringing out one of the tabs blocking it from going together. etrailer's price was lowest and the delivery was prompt. I am a return customer.
by: Mark01/19/2019
2000 Ford Ranger
The harness is easy to install on my 2000 Ranger. I have a set of magnetic trailer lights that I used to test it and everything worked right (left, right, brake, backup). This is my second purchase of this harness. The first one I pushed the loose wiring up into my spare tire with the intention of fastening it with tie-wraps later. When I saw the torn wiring hanging loose later, I realized what I forgot to do. On this one I fastened it as part of the installation (words to the wise).
by: John Y06/07/2012
2001 Ford Explorer
this kit came extremely fast. I ordered on the weekend and had it in my hand by mid-week. although my vehicle was not named in the instructions specifically, it was still not hard to install. It took longer to route the wires under the plastic trim than anything else. My Ford is 10 years old so sometimes things don't always go right. but this kit worked perfectly. Took about 20 minutes. I highly recommend Etrailer.
by: Bill K10/18/2017
2002 Ford Ranger
Bought bumper hitch and it was recommended to also purchase a wiring harness designed for my type of vehicle. These guys know their what makes it easy to install their products
by: Howard S.10/08/2014
2000 Ford Ranger
Product, item 118344, fit as instructed on my 2000 Ford Ranger XLT. Easy to do, only taking about 30 minutes to install within the factory harness/connectors. Instructions seemed a little vague to begin with but after looking at product and reading directions again all made sense. The T-One wiring harness works great and the harness wiring length was more than enough to make fitting and routing easy underneath my truck. Thanks to your Expert for all his assistance and if needed, will do business with you again. I have, and will continue, to recommend your business. Howard
by: Russ B.11/02/2011
1999 Ford F-150
I ordered a T-One Wiring Harness with 4 Pole Trailer Connector for a 1999 Ford F-150 late on a Friday. I received confirmation of my order and notice of shipment the same night. The wiring harness was received Monday and installed the same day. Two day turnaround on my order was fantastic. The instructions made installation easy. eTrailer.com knows what good customer service is all about. I will certainly recommend them in the future.
by: Joseph P.11/14/2013
2002 Ford Ranger
I recently purchased a T-One wiring harness for my 02 Ford Ranger. I'm extremely satisfied with this product it was easy to install and works perfectly. It saved me a lot of time in the process of wiring my truck for a trailer plug in.
by: Chuck S04/17/2019
I have ordered several hitches and wiring kits in the past from eTrailer and will continue to do so if the quality, price and exceptional service remains. Because of receiving earlier than expected, I have not installed my most recently purchased receiver hitch and wiring harness but I have unpackaged it and all looks to be top quality and intact.
by: Monte07/07/2017
1996 Ford Van
Received the Draw-Tite hitch (#75703) as scheduled. On my 96 Ford E-150 van installation was very simple only had to drill two holes. Also the wiring t-connector kit (#118344) installed easily. Both products were excellent quality.
Monte K
by: Steve ruiz07/30/2016
1997 Ford Aerostar
It was just like ever ties real simple to put in save me the hassle of paying $300 just to see what was wrong but then did research and found this wire kit and it works great I've had it for one year had no problems love it
by: Handyman Solutions05/01/2012
2000 Mercedes E-250
Product was easy to find on the website, good price, fast delivery and snapped right in. Actually I was just here to find a couple of receiver hitches that will fit Ford E250 vans and this wiring harness was recommended on the same page. Much better than my last hack-job trying to wire in trailer lights myself.
I am pleased.
by: Zeke06/02/2017
2002 Ford Ranger
Easy to find what I wanted. Harness arrived quick. Good price on something not available locally. Installed in 20 minutes. Trailer lights all working for first time in years!
by: A Friend07/15/2017
2000 Ford Van
Bought a wiring harness for my 2000 ford van and I couldn't be happier with my purchase. Not only was the price excellent it took like 20 minutes to hook up. Nothing to it at all. Only thing thats was odd was there was about three times the wire for the drivers side then passenger side. Didn't need all that. No biggie just tucked it on.
Thanks for an excellent product
25
151
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Will the Tekonsha P2 Brake Controller Work with an Airstream That has Hydraulic Brakes?The Tekonsha Prodigy P2 Trailer Brake Controller # 90885 will work on trailers with brakes on up to 4 axles and can be used with electric or electric-over-hydraulic trailer brakes. If your 2002 Ford Excursion came with a factory 7 Way already installed, the Tekonsha # 3035-P will also plug directly into a port under your dash, making the install very easy. If it came prewired with a factory 4 Flat, the port will still be under the dash and # 3035-P can still be used, but you will need...
view full answer... - Wiring Harness That Will Fit 1998 Ford E-350 Econoline Without Factory ConnectorTo add a 4-way to your 1998 Ford E-350 Econoline that does not have the factory tow package, all you need to do is add the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344, which uses plug-in connectors that you will install behind the van's taillights. I'm not quite sure what you are referring to in regards to a round trailer plug, as that would only be needed if you were using trailer brakes. Without brakes you will only need the lighting functions of the 4-way,...
view full answer... - Parts Needed to Install 7-Way on a 2003 Ford ExpeditionWe have what you need to install a 7-way on your 2003 Ford Expedition, but the part # 118242 is not a confirmed fit for your 2003 Expedition so I cannot recommend it for you. Instead you would need to start with a 4-way wiring harness like part # 118344 which has been confirmed as a fit. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the...
view full answer... - Parts Needed to Tow a 2014 Jayco Jay Flight With a 2003 Ford F-150The brakes on your 2014 Jayco Jay Flight will depend on how it was originally equipped and if it was altered at some point. With that being said, it is pretty easy to tell which you have by looking at the coupler on the trailer. For hydraulic brakes, you will either have a surge coupler, like # DM62VR, or an electric over hydraulic system like # HBA-12. The # HBA-12 will use a 7 Way harness, but the # DM62VR may use a 4 Flat, 5 Flat, or 7 Way. These systems can also use either a disc brake...
view full answer... - How To Install Tekonsha Voyager Brake Controller # 39510 On A 1997 Lincoln Town CarTo install the Tekonsha Voyager Brake Controller # 39510 on your 1997 Lincoln Town Car, you will need to have a 4-pole trailer connector on the rear of your vehicle and then you will need to hardwire the brake controller with the Brake Controller 7 & 4 Way Installation Kit # ETBC7. If you need to install a 4-pole connector on your vehicle you will use the Tow Ready Wiring Harness # C59496. This harness will tap into the tail light wiring. I am sending a link to the installation instructions...
view full answer... - Recommended 4-Way Trailer Connector For 2002 Ford RangerThe Tekonsha Tow Package Wiring Harness with 4 Pole Trailer Connector # 118241 is NOT a fit for your 2002 Ford Ranger. For a similar 4-way trailer wiring harness, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove either the tail light assemblies or interior trim panels...
view full answer... - Recommended Trailer Hitch And Wiring Harness For 2001 Ford E-450 Shuttle BusThe trailer hitch I recommend for your E-450 shuttle bus is the Curt Adjustable Width Trailer Hitch Receiver, part # 13703. This is a Class lll hitch and it has a 2-inch receiver opening. The hitch is adjustable for frames from 22 to 72 inches wide. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch...
view full answer... - Trailer Wiring Harness to Add 7-Way 2001 Ford Excursion Limited with Factory Tow PackageThe Curt Vehicle Wiring Harness # C55774 is confirmed to fit your 2001 Ford Excursion as long as you have the factory tow package. If you do not have the tow package you can add a 4-way with The Tekonsha # 118344 and then add the 7-way using # ETBC7.
view full answer... - Recommended Trailer Wiring Harness For 2000 Ford VanIf you are looking for the vehicle-side trailer wiring harness for your 2000 Ford van I recommend part # 118344. This is an easy installation by plugging into the connection points behind the tail lights on the van. If you need a 7-way connector at the back of your van you would need to first install the # 118344 and then install part # ETBC7. This plugs into the 4-way connector and you would then need to run the rest of the wires as shown in the attached drawing. If you are not planning...
view full answer...
- Trailer Hitch and Wiring for a 1999 Ford Escort ZX2The only trailer hitch available for the 1999 Ford Escort ZX2 is a Class I hitch # C11105. The recommended ball mount is # C45520. For a 1-7/8 inch ball use # 19257 and for a 2 inch use # 19258. For trailer wiring use # 118344 to add a 4-Way flat connector to the rear of the vehicle. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited...
view full answer... - Trailer Right Turn Signal Not Working When Connected to a 2000 Ford RangerIf your 2000 Ford Ranger has the factory trailer connector then there is a fuse for the trailer right turn and brake light located in the in cab fuse panel in location 7. But if this fuse is blown then the right brake light on the trailer also would not work. If you have an aftermarket wiring harness such as # 118344 then it ties into the tail light wiring on your Ranger. Otherwise you would have to follow the wiring as far forward as you can and fix any broken or pinched wires. I have...
view full answer... - Hitch And Towing Components Recommendation For 2003 Ford E-350 Van To Tow 37 Ft TrailerYou will want to check the owner's manual or with your dealership to make sure you do not exceed the towing capacity for your van. For your 2003 Ford E-350 I recommend the Draw-Tite Ultra Frame Hitch, part # 41906. This is a Class lV hitch and it has a 2 inch receiver opening. The ball mount kit I recommend is the etrailer Ball Mount Kit, part # EBMK2216. This kit includes a ball mount with a 1 inch rise or 2 inch drop, a 2 inch and a 2-5/16 inch trailer ball, the pin and clip, and a...
view full answer... - Trailer Hitch Recommendation for 2003 Ford Explorer 2-DoorFor your 2003 Ford Explorer with a factory hitch and 2 doors the Draw Tite hitch part # 75096 would be the best option we have as it has a 5,000 lb trailer towing capacity and is a confirmed fit. For trailer wiring you then would want the # 118344 for a 4-way. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a...
view full answer... - How to Install 7 Way Trailer Wiring on a 1997 Ford F-150It sounds like your 1997 F-150 does not have the tow package wiring so the wiring harness # 118242 will not work on your truck. To install a 7-Way trailer connector at the back of your truck, you will need to start with a working 4-Way connector, # 18252, or # 118344 if you have a stepside. If you need to splice to connect the 4-Way, use a circuit tester to splice to the appropriate wires you found at the connector on the frame rail. If you have a 4-Way connector at the rear of your truck...
view full answer... - Will the Curt Class III Hitch for the 2003 Ford Explorer Sport Trac Fit with Full Size Spare TireYes, the Curt Class III Hitch, part # 13407, will fit your 2003 Ford Explorer Sport Trac without removing the factory size spare tire. Spare tires larger than the factory size are not tested with trailer hitches so if your spare is larger than OEM it could prove to be a problem. I have included a link to the installation instructions on the Curt hitch for you to review. I also attached a photo of a similar hitch installed on a Sport Trac with OEM full size spare. We do not have a photo...
view full answer...
- Parts Needed to Install a Trailer Brake Controller on a 1999 Ford E-350 Econoline VanIn order to install a brake controller on your 1999 Ford E-350, the first thing you are going to need is a 4-Way trailer connector # 118344. I have included a link to the isntallation instructions for you to view. Next you will need a 4 and 7-Way installation kit # ETBC7. This will provide the 7-Way, while retaining the use of the 4-Way, and all of the wiring needed to install the brake controller. I have included some links that will explain the ETBC7 installation for you. And finally...
view full answer... - Class III Hitch for 2002 Ford Explorer 4dr 4WD with Factory HitchWe do have trailer hitch options that will fit underneath the OEM hitch on your 2002 Ford Explorer. None of the available trailer hitches replace the factory hitch though. The most popular option is Draw-Tite trailer hitch # 75132. This is a Class III trailer hitch rated for 500 pounds tongue weight and 5,000 pounds gross trailer weight. I have included a link to the installation instructions for you. I also recommend the etrailer ball mount kit, # 989900, which comes with 2 ball mounts,...
view full answer... - Trailer Hitch Recommendation for 2002 Ford Ranger Edge FlaresideYes, we spoke with our contact at Curt and he stated that trailer hitch # 13138 does fit the 2002 Ford Ranger Edge flare side. I have included a link to the installation details for you. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # 989900, which comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For wiring use Tow Ready Custom Fit Vehicle Wiring, # 118344. I have included a link to the installation details for the wiring as well.
view full answer... - Parts Needed to Install Trailer Wiring on 2000 Ford F-150Since your 2000 Ford F-150 Lightning does not have the factory tow package you'd need to go a different route for trailer wiring. You'd want to start with the part # 118344 for a 4-way wiring harness. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way...
view full answer... - Is Curt Class III 13138 Receiver Hitch Compatible- 2001 Ford Ranger w/Step Side BedAccording to my Curt representative, there aren't any fit exclusions for the # 13138 Class III hitch on the 2001 Ford Ranger. The hitch fits all Ranger models from the 2001 model year, including yours with a stepside bed. Additionally, I've looked through our customer reviews of this product, and haven't found any fit issues with stepside beds. The hitch will fit perfectly for you. To complete your towing system, you'll also need a trailer wiring harness, a ball mount and a trailer ball....
view full answer... - Trailer Hitch Fit for a 2002 Ford Ranger StepsideI spoke with my contact at Curt and he informed me that the hitch part # 13138 that you referenced is a confirmed fit for your 2002 Ford Ranger Stepside and would work well for you. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch...
view full answer... - Adding New 7-Way Harness to 2000 Ford Excursion with Square Connector All of the custom wiring harnesses we have available that are designed to tap into the factory tow package of your Ford Excursion utilize the circular US Car Connector type connector. It's possible that you've simply located a different plug behind the bumper that has a different purpose (we've seen this from time to time) but if you're sure you've found the correct connector for installing a new wiring harness, the only solution we have would be a T-Connector Harness like the Tekonsha...
view full answer... - Can Small Boat Trailer Be Towed By 2002 Ford Explorer Sport Trac Using Bumper Mounted Trailer BallThat's a great question. Your Explorer Sport Trac is equipped with a towing bumper, with a 3500 lb capacity. If the rear bumper height is such that it's pretty close to the height of your trailer's coupler when it's jacked up and level, then by all means get you a trailer ball with the proper diameter shank to fit the hole in the bumper (likely 1 inch) and ball size (likely 1-7/8) and tow that boat and trailer. If the hole diameter is 1 inch, you can use # 19260 for a 1-7/8 inch ball or...
view full answer... - Hitch Recommendation for a 2002 Ford ExplorerCheck out the Curt Hitch part # C13350. This hitch will install right under the factory hitch of your 2002 Ford Explorer and will work with your factory full size spare. I attached a link to a picture of this hitch installed to the right for you to check out also. For trailer wiring you would want the Tow Ready Harness part # 118344. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rusty
7/12/2022
Been a year and the lights are still working like a charm! I highly recommend this product!