7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter

See what our Experts say about this Pollak Custom Fit Vehicle Wiring

• Troubleshooting No Power To 7-Way On A 2017 Ram 1500
  Another thing you can check on your 2017 Dodge Ram 1500's 7-way is the physical connector. You're going to want to ensure that there is no corrosion or that may be causing a malfunction. You're going to want to make sure that the ground wires are all properly grounded and that they are free from corrosion and there are no breaks in the wire. You're also going to want to make sure that the wires inside the receptacle are not damaged in any way. If all your wiring is good to go, then you'll...
  view full answer...
• Recommended Trailer Hitch for 2022 Ram 1500 Towing Winnebago Micro Minnie
  The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15005 will be able to handle you Winnebago Micro Minnie. It is a class 5 hitch with a concealed cross tube. A max tow weight of 15000 pounds and a max tongue weight of 1700 pounds. If you need a wire connection I suggest the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933. I suggest getting the etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs # 989900 if you...
  view full answer...
• Will Pollak 7- and 4-Pole Trailer Connector Socket Fit 2017 Jeep Wrangler Unlimited Sahara
  Assuming you have the factory tow package you will have the factory connector on your Jeep. Your factory 4-way should be plugged into the same connector. Removing the 4-way and adding the # HM40975-11933 will give you both a 4-way and 7-way connection. An aftermarket 4-way like the # 118416 would be plugged into the connection points behind the driver's-side tail light. If this is what you have, you would need the # ETBC7 to add a 7-way to your Wrangler.
  view full answer...
• 7-Way Trailer Connector Installation on 2011 Jeep Wrangler
  If you're needing a 7-way trailer connector for your 2011 Wrangler (which is what it sounds like), you'll need to start by installing a 4-pole connector using part # 118416. How you'll proceed from here depends on if your trailer has electric brakes or not. If it does not, you'll also need the 4-pole to 7-way adapter, part # 37185 which plugs into the 4-pole provided by the # 118416. Once plugged in, the adapter has 4 additional wires. The white wire is grounded to the vehicle frame, and...
  view full answer...
• Replacement for OEM Wiring and Connector on 2009 Dodge Ram 2500
  The answer to your question depends on what exactly was damaged. The closest thing we have to a replacement wiring harness is the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933. This replaces your connector as well as the wiring harness that plugs into your factory port at the rear. If you damaged anything beyond that factory port then you will have to get a replacement from the dealer.
  view full answer...
• Does Pollak Trailer Connector Work With Electric Brake Controller on 2018 Jeep Wrangler?
  The Pollak 7- and 4-Pole Trailer Connector Socket # HM40975-11933 will absolutely work with a brake controller. This will replace the 7-way on your 2018 Jeep JK Wrangler Unlimited with factory tow package. As for a brake controller itself, I strongly recommend the Prodigy P3 # 90195; it is the most popular model we carry due to its effectiveness and ease of use. It will activate your trailer's brakes immediately in proportion to your Jeep's brakes and offers three different boost levels...
  view full answer...
• Easy to Install Trailer Brake Controller for 2008 Jeep Wrangler Unlimited with 4-Pole Wiring
  Yes, we can help you with the items needed to upgrade the 4-pole wiring on the 2008 Wrangler Unlimited to a 7-way and to install a trailer brake controller. The Jeep does not have an under-dash port to connect a controller but we do have an option that will be very easy to install. For the easiest possible installation I recommend the Curt Echo # C51180 and 7-way upgrade/install kit # ETBC7L. If your Dad has a compatible smartphone then these two items are all that is needed to add the...
  view full answer...
• What Parts Will Be Needed to Install a Brake Controller and 7-Way Connector to a 2015 Jeep Wrangler
  You will need to install a 7-Way connector when installing a brake controller to your 2015 Jeep Wrangler Unlimited. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake controller I recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.
  view full answer...
• Parts Needed to Add 7 Way Plug to 2014 Jeep Wrangler Unlimited
  To add a 7 way trailer plug to your 2014 JKU I recommend using the ETBC7 since it comes with all of the wiring, butt connectors and breakers required to add a 7 way plug. This would be the correct harness if you added your 4 way plug after purchasing your vehicle. If your JKU came with the 4 way from the factory, you can instead use the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter # HM40975-11933, which offers a plug and play option. Since...
  view full answer...
• Troubleshooting 7-way Trailer Connector on 2004 Jeep Grand Cherokee
  The existing turn signal/brake lamp circuits are already converted, so you shouldn't need an additional converter. I'd recommend checking the fuse box under the dash and in the engine compartment, and locating the right and left trailer turn signal/brake lamp fuses, to make sure they're installed and not blown. Replace as needed. I'd also closely examine the pins on the 7-way for corrosion. If you see any green or white corrosion on the pins, the corrosion could have spread inside the...
  view full answer...
  
• Installation of Brake Controller on 2013 Jeep Wrangler Unlimited With Factory Tow Package
  Since you have the factory tow package on your 2013 Jeep Wrangler unlimited, the installation of the # HM40975-11933 is all that is necessary for a working 7-way. However, you will need some additional wiring to get your brake controller installed. You will need to locate the coiled up light green or blue brake output wire near the emergency brake pedal. You will also need the # 5506 to add circuit breakers and run wire from the battery to provide power as well as a ground connection....
  view full answer...
• Troubleshooting Tandem Axle Trailer Brakes
  Many brake controllers are rated for 2-8 brake assemblies, which would be 1-4 axles. In any event, I've yet to see the brake controller that shouldn't work fine with a tandem axle trailer using 10 inch brake assemblies, as long as everything is functioning properly. Which brake controller are you using? Is it throwing any error codes? I'll link to some helpful articles about testing and troubleshooting brake controllers, but I can run through some of the more common and easy to find and...
  view full answer...
• Replacing OEM 7-Way/4-Way Connection and Wiring on 2013 Ram 1500 Truck
  We have the 7- and 4-Pole Trailer Connector Socket for Chrysler/Dodge OEM # HM40975-11933. It includes both the factory tow harness and OE plug. You will not need to use the bracket included or screws as it will replace the factory plug in the factory bumper on your 2013 Ram 1500.
  view full answer...
• Recommended Trailer Hitch Wiring And Components For 2016 Jeep Cherokee Trailhawk
  For your 2016 Jeep Cherokee Trailhawk, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13171 over the OEM hitch you mention if you don't already have it. This is based not only on price point, but ease of installation and capacity ratings. For a wiring harness, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118605 if you don't have the factory tow package. This harness connects to your factory connectors located behind the...
  view full answer...
• Wiring Harnesses For a 2007 Dodge Dakota With Factory Tow Connection Points
  I have a few options for your 2007 Dodge Dakota that has the factory tow connectors. Be sure to check your fuse panel for the necessary fuses to power the trailer connector functions as they may have been left out from the factory. First is the T-One Vehicle Wiring Harness # 118381 which is only going to give you a 4-way flat connector. Second is the Hopkins Endurance Quick-Install 7-Way Trailer Connector # HM42190 that will give you a 7-way connector. Finally the 7- and 4-Pole Trailer...
  view full answer...
• Recommended Trailer Hitch and 4/7- Way Wiring Harness for a 2015 Ram 1500
  The trailer hitch I recommend for a 2015 Ram 1500 is the etrailer Trailer Hitch Receiver part # e98852 which is super simple to install and features bolt-on installation. Then for the wiring, I recommend the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket part # HM40975-11933 which should be just what you need. It has both 4 and 7-way connection points.
  view full answer...
• How To Convert a 4-Way To a 7-Way On a 2018 Jeep JK Wrangler
  In order to install a 7-way trailer connector on a 2018 Jeep JK Wrangler with factory tow package you can use the 7- and 4-Pole Trailer Connector Socket part # HM40975-11933 which is plug-n-play. This connector plugs into a factory port under the rear bumper and will replace the 4-way you have now. It has the battery charge line circuit you will need for your trailer. If the trailer also has brakes as well then you'll need a brake controller for which I recommend the Curt Echo Wireless...
  view full answer...
• Replacement Trailer Connector for 2007 Dodge Ram Cab and Chassis and How to Wire in Camper Lights
  First, if your 2007 Dodge Ram cab and chassis model came with a factory installed 4/7-Way then you can use # HM40975-11933 to replace it. It plugs into the factory wiring harness under the truck. What I would do is to wire the camper light wires to either a trailer side 4-Way or 7-Way connector, depending on what all functions are needed, and plug that into the trucks trailer connector instead of hardwiring it in. For a 4-Way you can use # HM48110. White is ground, brow is running lights,...
  view full answer...
• Parts Needed to Install 4-Way and 7-Way Connectors on a 2016 Jeep Wrangler Unlimited
  If you don't already have electrical connectors on your 2016 Jeep Wrangler Unlimited then you will need to start off by installing a 4-Way connector like the T-One # 118416. This plugs in behind your tail lights and will give you the basic lighting functions for your trailer. One the T-One is installed you need to install the Universal Wiring Kit # ETBC7. This comes with all of the wiring and connectors you need to have a fully-functioning 7-way (and 4-Way) at the rear of your Jeep. If...
  view full answer...
• 2020 Ram 1500 Receiver Hitch Recommendation
  I Recommend Draw-Tite Trailer Hitch Receiver # 41913 as it will work on your 2020 Ram 1500. It is designed to fit both models with either the Class 3 bumper or not. It offers you a maximum gross trailer weight of 15,000 lbs and maximum GTW when used with weight distribution of 17,000 lbs.(Please consult your owners manual for exact tow ratings) Might I also suggest a Channel Style Adjustable Ballmount #C45900 to make towing most every trailer that you will encounter a breeze. It has...
  view full answer...
• Installing Hitch, Brake Controller and 7-Way Trailer Connector on 2018 Dodge Durango
  Lets begin with the hitch. As you don't care to mess with removing the bumper cover/rear fascia I'd recommend the etrailer brand Class III hitch, part # e98901 which is rated for 6000lbs towing/600lbs tongue weight. The installation won't require removing the bumper cover or fascia, but if your Durango is an RT model with dual exhaust, you might need to so some trimming on the heat shield and fascia. The hitch will fit models with an 18" or smaller spare tire under vehicle; larger spare...
  view full answer...
• Trailer Wiring Recommendation For 2017 Jeep Grand Cherokee
  The Pollak 7-Way part # HM40975-11933 is a fit for your 2017 Jeep Grand Cherokee and would plug into a square connector at the rear of the vehicle. Most likely it's the connector you found already based on what you described. You might test the pins of the connector you found with a circuit tester like part # PTW2993. If they are active when vehicle taillight signals are on then this will work. If instead you do not have the tow package wiring complete the T-one kit part # 118727 would...
  view full answer...
• Will the Draw-Tite Hitch 41948 Fit a 2019 Ram 1500 Classic Warlock Special Edition
  The Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41948 is a fit for a 2019 Ram 1500 Classic Warlock Special Edition so long as you don't have a factory trailer hitch. The Draw-Tite hitch offers a complete bolt-on installation with heavy duty towing capacity of 12,000 lbs. If you don't already have a trailer wiring harness, the 7- and 4-Pole Trailer Connector Socket part # HM40975-11933 fits into the factory bumper cutout.
  view full answer...
• Troubleshooting Trailer Connector on 2013 Ram 1500
  If the fuses are good and there's no corrosion or damage to the connectors, then there has to be either a problem with the wires themselves or the ground. I would start by checking and possibly reconnecting the ground just to make sure since it's fairly easy to do. I would also make sure the issue is on the truck side by testing the connectors with a circuit tester like # PTW2993 if you haven't already. If you've already done this and it's definitely on the truck side and you're still...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?