Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
Item # C59236
Retail:$120.95
Our Price: $78.54
You Save: 35%
Confirmed to Fit
2000 Chevrolet Silverado
without factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (957)
- Q & A (0)
- Photos
2000 Chevrolet Silverado - Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Trailer Hitch Wiring
- 4 Flat
- Converter
- CURT
Install a 4-way flat on your Chevrolet Silverado with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Ensures that your vehicle's wiring matches that of your trailer
- Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems
- Connects directly to your battery to avoid overloading your vehicle's electrical system
- Constructed using surface-mount technology (SMT) for consistent, reliable performance
- Maximizes trailer light yield and intensity while producing minimal heat
- Ensures superior operation in rough road conditions
- Resists water and vibration thanks to potted enclosure
- Connects directly to your vehicle's wiring with the included quick-splice connectors
- Color-coded wires and wiring guide ease installation
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7.5 amps per circuit
- Limited 1-year warranty
Installation
To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions. Use the quick-splice connectors to attach the input wires of the tail light converter to the corresponding wires from your vehicle. Once you've spliced in the converter, connect the included hot lead to the black wire and run it up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Then locate a flat surface inside your vehicle near the tail lights and adhere the black converter box using the provided double-sided tape. Find a raw metal surface to use as a ground point and secure the white ground wire using the provided ring terminal and screw. Finally, secure the converter wires to your vehicle using the included cable ties.
It is recommended that you use a small amount of grease on the 4-pole connector to help prevent corrosion.
Powered Tail Light Converter with Surface-Mount Technology
Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring. If your vehicle operates on a 3-wire system, which means that it has separate brake and turn signals, then those signals will need to be combined so that they run on 1 wire to properly activate your trailer's tail lights. This converter will also ensure that your trailer's lights illuminate fully, even if your vehicle has pulse-width modulation (PWM) wiring. Note: This will not affect how the tail lights on your vehicle operate.
This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
59236 Curt Powered Tail Light Converter for 2-Wire, 3-Wire or PWM Systems - 4-Way Flat Harness
Replaces 59200
Compare to Tekonsha TK47FR
Installation Details
California residents: click here
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector - C59236
Average Customer Rating: 4.7 out of 5 stars (957 Customer Reviews)
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.by: Steve05/08/2023
So, video left out removal of plastic trays behind each wheel well. A small torx is required.
Per video my wiring on left side is correct Red to the Yellow/Black, Yellow to the Blue/Green. Test tool (as seen in video) shows nothing when brake pedal pushed; brake indicators on tester both light up when running lights are on, but the running lights indicator does not light up.
Blinker indicators on tester are correct.
Have done the training cycle 6 times, slowly.
Steve B.
5/23/2023
Hi. Turns out the video for the 2013 x3 is correct, for my 2017. Brake and tail lights on separate wires.
by: Vic Smith02/18/2024
2021 Ford Mustang Mach-E
For my application, a 2021 Mach-e, this required cutting and splicing into the LED tail lights. I went back to the interweb and ordered one that was plug and play and did not require splicing. Yes, there is a video where a guy identifies exactly how to install this particular kit on the Mach-e, but it was just a bridge too far for me. The plug and play wiring works great and was easier to install. The plug and play wiring took about 80% of the installation time, the hitch itself took about 20% of the install time.
Katrina D.
2/27/2024
I am sorry that this harness was a bit more complicated than what was expected to get installed. I would go with the plug and play all day. Unfortunately, the only harness we have for your 2021 Mach-E that is a plug and play option is part # TK24VR, which is currently on extended back order. This means, that we are waiting, but do not have a date that our shipment will be in, so we took the part off of the site for now.
by: Michael 04/26/2024
Buick
I have a small convertible Buick. Almost no one would put a trailer behind this car. But I use it to pull my jet ski. It was great to have this connector. It works perfectly.
by: Mark 05/10/2024
Kia
Installed easily. Kia should have a plug in option so that you don't have to run wiring all the way to the battery. But installed fine, well detailed by etrailer.
by: Chris03/22/2024
Terrible job packing hitch. See pics. Hitch has deep scratches through paint. Won't purchase from trailer again.
by: Allen03/06/2024
2022 Kia Soul
I'm sure the wiring is fine. However, I bought from etrailer because the product support was supposed to be great. We can't figure out which wires to attach to. Yes, I've read instructions. Yes, I've used a multimeter and test light. Yes, I've posted in forums. Yes, I've spent hours looking online. No dice. I even had an electrician give it a go to determine what to splice. I'm injured so can't walk, making some direct instructions on which wires to splice more important at this time. I can't keep removing the lights, etc. and reinstalling them when I can't ID the correct wires. I told them this on the phone when I ordered. They seemed supportive. When I repeatedly asked for which wires to splice the response was something akin to, "We don't know. Figure it out."
Two thumbs down. Received great support from a different online supplier.
by: Jerry K03/16/2024
This works great and people can see the brakes turn signals and tail lights when we have the bikes on the back of the car. We put this on so we could plug a portable lighting system in for our bike rack.
by: Daniel 05/14/2024
The product works great but the instructions were a little hard to follow for a newbie. I did eventually get it going but I needed to consult my mechanic (YouTube) to get it all figured out.
by: Robert 04/24/2024
Your installation video was great. I don't think I could have found the correct wires without it. The Curt instructions were not clear in determining which wiring scheme the Pacific has. I still don't know what PS stands for in their chart, but your video explained it nicely.
by: Gale 05/10/2024
I had this wiring harness professionally installed. Works as it should.
by: Cynthia02/29/2024
2018 Volvo XC60
My son said this is the part I needed so I guess it's good but my son, the mechanic said it's not what I needed. I guess it was too much so need to return.
Katrina D.
3/7/2024
Sure! I've got your information sent over to customer service to get the return processed. Yeah, that is the only confirmed universal option that we have for your 2018 Volvo XC60, I wish it was a bit less expensive and that there was an easy plug and play option for your vehicle. Some mechanics do carry some OEM parts for trailer wiring for vehicles; maybe see if your son is able to help you find an OEM harness. It may be a bit expensive, but you could always reach out to a Volvo Dealership to get an OEM harness.
by: Scott 05/20/2024
Overall easy to install. Takes a few hours. The instructions could use updating. Vehicle years and trims (bulbs vs led) had wire colors that didn’t match any instructions or videos.
by: Dave N10/29/2023
2024 Kia Telluride
The wiring harness doesn't quite work as advertised. I followed the provided instructions. Now when I turn on the left turn signal on my 2024 Kia Telluride, the left side trailer running lights also flash with the turn signal. The right side turn signal works correctly. Harness installation was a huge PITA. I blame Kia for not having a plug and play like my 2022 Santa Fe had. I had to remove both tail lights, splice into the factory wiring then run a power wire from the rear to the car's battery in the front. Again, a huge PITA but that's Kia's fault, not etrailer. Except for those things, I would've given more stars.
Jenny N.
11/2/2023
Yes, I would say powered hardwire harnesses are a tough install. I want to help do little trouble shooting with you. Can you check the area where you grounded the wire to make sure that it is to bare metal. If it is a clean, metal location already, disconnect the ground wire and attach it to a long piece of wire. Run this wire to the vehicle's negative battery terminal for testing purposes. If this solves the issue, the ground wire can be permanently run to the negative battery terminal or moved to a new location. I am hoping that this will stop the left turn signal from flashing on the trailer.
by: Mark N02/04/2024
What a great experience. The wiring harness kit was easy to install, and the people at etrailer were courteous and happy to answer my questions. They got right back to me and saved me lots of time. It’s very rare to get service like that anymore.
BTW, the unit works very well.
Thanks etrailer.
by: Paul 04/29/2024
Honda Element
Worked as advertised. Used on a Honda Element. I would recommend to others.
by: Bill04/28/2024
Fantastic and great video by on how to B install
by: John 03/10/2024
It’s a great product. We pull the small trailer from California to Missouri. No problems at all just like factory.
by: Mike 01/22/2024
Mercury
I received the Trailer hitch, and I was able to put on my 2011 Mercury
Marqui all by myself with the assistance of three jacks. I completed
the job in my garage at home. I did watch the videos on u-tube about
6X. I am very happy with the trailer hitch.
by: Philip 03/19/2024
2019 Ford Ecosport
A little tricky to install, but the videos they provide do a great job of explaining what needs to happen. (2019 Ford EcoSport.) The wire clips are a little finicky... had issue with one side, but managed to get it working.
by: Robert04/27/2023
2023 Hyundai Palisade
2023 Hyundai Palisades are unique. Your website indicates that this item works for the 2023 Palisade, but according to a lady in your office, it only addresses the lights on the trailer, but does not disconnect the automatic braking system built into the Palisade in the event of a rear end collision that applies the brakes when it senses an obstacle (read boat trailer). Very frustrating!
Jenny N.
4/28/2023
I have a fix for you. All you need to do is turn off that feature in the vehicle while towing. I have a Hyundai and you will just need to play around in the vehicle menu system to find it and turn it off. I recommend reading up in your manual the section on towing. There may be other features you have that you will want to disable.
by: Thomas 05/01/2024
Works great when installed correctly according to the instructions.
by: Alexander 02/14/2024
Kia
If you need something trailer/towing related, e trailer has always been great for me. This product worked great for my 2024 Kia telluride xline trim.
by: Stephen08/26/2023
Once I understood I had a 2 wire system in my 2022 BMW X3 the installation went well. The green wire for the right tail light is too short and I had to splice on an additional 2' of wire.
by: Michael 03/25/2024
Works as it should. The video made it easy to install. Didn't come with quiet enough hardware to install but that wasn't a big deal though.
by: Allan04/10/2024
Ordered wrong part. They graciously handled the mess I created and sent out the right parts I needed right away.
25
959
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Parts Needed to Add 7 Way Trailer Connector on 2019 Mercedes GLS450It sounds like you're trying to add a 7 way connector to your 2019 Mercedes GLS450. I have a solution for you but there are no "plug and play" style connectors available for these vehicles so we'll need to cobble together some pieces to make this work- you'll need to first install a 4 way flat connector and then add in the 7 way. To start, I recommend using the Tekonsha ZCI # 119250KIT which allows you to clamp onto the wiring on your GLS450 to receive the signals you need to install...
view full answer... - Trailer Wiring Harness Fit for 2019 Lexus RX350As long as your RX350 isn't the F Sport or the L model, the # 118255 will indeed work. For the F Sport or the L model, you'll need to hardwire in a converter, using part # C59236
view full answer... - Custom Fit Wiring Harness for a 2008 Toyota RAV-4 The Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector item # C59236 you referenced is a universal harness and prone to failure. For your 2008 Toyota RAV-4 we do have a custom wiring harness. It is the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118412. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area....
view full answer... - Will Draw-Tite Trailer Hitch 41116 Fit 2010 Ford Crown Victoria Police Interceptor w/Dual ExhaustFirst, you may not have to do anything with the exhaust because it appears that it may only affect Lincoln Town Car models. In the event that the exhaust on your PI Crown Vic is in the way of the hitch installation, the only modification is to move a hanger bracket. I have linked the instructions so you can see the possible modifications. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4EL. It includes a ball mount, interchangeable ball set, a hitch pin with...
view full answer... - Recommended Hitch and Wiring for my 2013 Mercedes Benz GL550The Curt Trailer Hitch Receiver part # C13190 is rated for the 900 lb. tongue weight and 7,500 lb. gross trailer weight that you are looking for. Be sure to check your owner's manual for information of what your GL550 is rated to tow and do not exceed it. For wiring the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector part # C59236 is the only available option. This will require to use a test light like the Hook Probe Circuit Tester part # PTW2993 behind your tail light...
view full answer... - Troubleshooting 4-Pole Trailer Wiring Harness C59236 Installation in 2009 Audi A4 SedanThe Curt harness # C59236 you purchased is the correct one for the 2009 Audi A4 sedan and the odd behavior from the trailer lights, like the turn signals activating on the opposite side, is most often caused by an insufficient ground. This usually has a very simple fix. Remove the ground wire ring terminal and apply sandpaper to that point to remove any paint, primer, undercoat (or rust) that could be blocking the clean ground connection. An application of dielectric grease like # 11755...
view full answer... - Where to Run 12 Volt Hot Lead When Installing Wiring on 2017 VW Golf TSiThere are no separate instructions for running the 12 volt hot lead of the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 inside your 2017 VW Golf as opposed to outside. Our installers routed the power wire that way to make sure it avoided moving parts and heat sources, and zip tied it so it is completely secure. This will be the easiest way for you run this wire and properly secure it to your VW.
view full answer... - Trailer Wiring Harness Recommendation for 2006 Volkswagen GTI with Separate WiringThe Curt trailer wiring harness part # C59236 that you referenced is confirmed as a fit for your 2006 Volkswagen GTI and has a converter box that is designed to adapt the vehicle wiring style you have to the correct combined trailer wiring needed. You'll run your separate vehicle wiring to the converter box which will then combine the circuits onto the same wiring of the 4-way of the kit.
view full answer... - Towing Capacity and Parts Needed for 2006 Lexus RX 400hNo worries...all subjects were new to each of us at one point! Hitches and trailer towing included. You may want to start off with a review of the linked article on towing basics; these will help you with terminology and the essentials of towing. Step 1 in your towing prep is confirming that your 2006 Lexus RX 400h is rated to tow the 2000-lb trailer. I reviewed an online edition and on page 601 the manual indicates towing capacities of 2000-lbs for the non-tow-package-equipped version...
view full answer... - 4-Pole Trailer Wiring Harness for 2003 Toyota Avalon That Does Not Require 12V Power ConnectionMany vehicles like your 2003 Toyota Avalon are specified to use only a powered (or active) trailer lighting harness such as the four shown on the link provided, one of which is the Curt # C59236. The Hopkins harness # HM11141820 that you referenced also requires a 12V power connection to the vehicle battery, but note this harness is not a fit for your 2003 Avalon. The reason that only powered harnesses are offered for your car is that the wiring in the vehicle is not heavy enough to handle...
view full answer... - Does Curt T-Connector # C56324 Fit a 2017 Honda Civic EX HatchbackThe Curt T-Connector # C56324 that you referenced will fit a 2017 Honda Civic, but according to our fitguide it is only compatible with the Coupe version, not the EX Hatchback that you have. Instead you will need to go with a hardwire option. The Curt option that I recommend going with for your Hatchback is the Powered Tail Light Converter # C59236 because it has a higher amp rating than the other Curt wiring kit # C59496 that fits your Civic. This splices into the tail light wiring and...
view full answer... - How Would the Curt Wiring Harness part # 56200 Install on a 2013 GLK 250We haven't had the chance to install the Curt Wiring Harness part # C59236 on a 2013 Mercedes GLK 250 so I do not know the correct color wires you would need to use. However, I attached a video that shows exactly what you will need to do to determine which wires to use. Basically you will test the wires of the taillight assemblies of your vehicle with the included circuit tester and then you will connect the correct wires of the converter to them according to the instructions.
view full answer... - 4-Pole Trailer Wiring Harness Options for 2016 Volkswagen Golf GTIThere are two basic types of 4-pole trailer wiring harness available for your 2016 Volkswagen Golf GTI, hardwired kits such as Curt # C59236, and the no-splice Tekonsha ZCI harness # 119250KIT. The ZCI kit avoids all need to cut into the car's internal wiring. The harness uses removable current-sensing ferrite clamps that snap into place around the car's wires to detect the vehicle lighting signals without an actual direct-wired connection. You need run only 1 single wire up to the battery...
view full answer... - Will etrailer.com Trailer Hitch Receiver for a 2006 Toyota Highlander Fit the Hybrid ModelOur fit guide splits up the hitches for your 2006 Toyota Highlander into two categories: those that are confirmed to fit the Hybrid model and those that aren't. The etrailer.com hitch, part # E98857, fits both the Hybrids and non-Hybrids so it shows up under both categories which can be kind of confusing sometimes. Rest assured, it does fit your Hybrid Highlander. If you're going to be towing with your Highlander you also need a wiring harness. Part # 118248 fits if you have the tow...
view full answer... - 4-Flat Wiring Harness for a 2014 VW Jetta SportwagenI have a solution for you but there are no plug and play adapters for your 2014 VW Jetta Sportwagen. For a 4-flat connector you are going to want the Curt Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit item # C59236. This kit works with either LED or incandescent bulbs on both the trailer and vehicle.
view full answer... - Does Draw Tite Trailer Hitch 41116 Fit 1999 Mercury Grand MarquisThe Draw Tite hitch part # 41116 is a confirmed fit for your 1996 Mercury Grand Marquis. For a ball mount you'd need the part # 36063, for a 1-7/8 inch hitch ball part # 19257, for 2 inch ball part # 19258, then for trailer wiring # C59236.
view full answer... - 4-Pole Trailer Wiring Harnesses for 2015 Volkswagen Golf and 2015 Volkswagen GTIThe 2015 Volkswagen Golf and the 2015 GTI do call for different wiring harnesses. Tow-Ready 4-pole # 118646 is a custom-fit powered harness that plugs in at the tail lights of the 2015 Volkswagen Golf using vehicle-specific connectors. For the 2015 GTI only universal-fit harnesses are available, Tow-Ready # 119250KIT and Curt # C59236, both of which are hardwire installs. These do not have the connectors to match the car. Both of these will require splicing of wires and you'll need to...
view full answer... - Trailer Hitch for 2018 BMW X1 SportI am happy to help you find a hitch for your BMW X1. I reached out to Curt and confirmed the # C13303 hitch will work on your X1 with the sport package. I attached an installation video for your reference. If you are wanting to tow with this vehicle you may need a few more things. I recommend the # C59236 wiring harness and a 2 inch ball mount and ball. We offer a variety of ball mounts depending on your towing needs so I included a link to our FAQ Ball Mount Guide for your convenience.
view full answer... - Vehicle Wiring Harness For 2021 Ford Mustang Mach-EI have a vehicle wiring harness recommendation for you, but the Curt Trailer Hitch Receiver # C77ER you were looking at for your 2021 Ford Mustang Mach-E does not include a wiring harness and trailer hitch receivers do not include the wiring. All you need for wiring is part # C59236.
view full answer...
- Recommended 5-Way Adapter Harness In order to add a 5-way harness to your X5 you'll need to use the Curt Trailer Connector Adapter item # C57187 with a 4-way connector like the Curt Powered Tail Light Converter item # C59236 you were looking at. I am sorry but they don't make vehicle specific 5-way wiring harnesses which is why you need the adapter. If your vehicle has a 7-way connector you will want to use the Wesbar Adapter item # 707250.
view full answer... - Trailer Wiring Harness Recommendation for a 2006 Scion tCThe T-connector type harness # C59236 is not a confirmed fit for your 2006 Scion tC but I do have a solution that will allow you to install a trailer wiring harness without having to cut and splice wires on the vehicle. You can use the ZCI harness # 119250KIT. This harness has special connectors that clamp around the vehicle wiring and sense the electrical current inside. It's kind of awesome!
view full answer... - Curt 4-Pole Wiring Harness C59236 Installation in 2011 Land Rover Range Rover SportI suggest confirming that when you re-connect the tail light wiring plug in your 2011 Land Rover Range Rover Sport all lights operate properly. This would be the brake lights (when the pedal is pressed), the tail lights (when the vehicle headlights are turned on) and the turn signals when these are engaged. I suspect they will but it is helpful to confirm that all of the required signals are present at the lights before wiring in the trailer harness. On your vehicle when the connector...
view full answer...
- Visibility of the Curt Class I Hitch on a 2009 Volvo S40We have not had a chance to install this hitch on a vehicle like your 2009 Volvo S40, but I spoke with my contact at Curt and he said the majority of this trailer hitch will not be visible. The top of the receiver will sit flush with the bottom of your bumper fascia. He did mention that you may be able to see the bottom part of the mounting arms that extend just past the crossbar on both sides. I have attached installation instructions for you to check out. If you plan on doing any light...
view full answer...
- Ball Mount and Hitch Balls for Curt Trailer hitch # C11762 on a 2002 Lexus IS300The Curt Trailer Hitch, # C11762, is a Class I hitch with a 1-1/4 inch receiver. It accepts ball mounts with a 1-1/4 inch shank. With Class I and II trailer hitches, you should use the manufacturer recommended ball mount. This trailer hitch comes with the appropriate ball mount. For a ball, you can use # A-82 (2 inch diameter) or # A-80 (1-7/8 inch diameter). For trailer wiring on your 2002 Lexus IS300, use Curt Wiring, # C59236.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Ethan H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Kristen H
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
5/16/2023
You will need to double check and make sure that your ground wire is attached to a clean metal surface. If you are grounded properly, and still have no lights, then you will want to test the converter box itself. If you are receiving power to the box and nothing out of the box, then it is possible that you have a defective box.