Set the mood with this waterproof, 1-1/8" x 1/2", rectangular, white LED accent light with flood beam. Designed for ambient or courtesy lighting on your boat. Surface mount. Requires mounting cover (sold separately). 9" Long pigtail.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this TecNiq Waterproof White LED Boat Accent Light with the flood beam pattern. Now, this LED light will provide a nice, bright, big white light for your boat. It's great for upgrading or replacing any courtesy or accent lighting. This one does give off a flood beam, which will illuminate a very wide area. The light is in a nice sealed waterproof housing and lens unit, does have an IP68 rating, and it is a durable polycarbonate housing with a UV resistant lens.
As you can see, it as a clear lens over four white LEDs, they do use premium LEDs, which are energy efficient, long lasting, and vibration resistant. They are rated up to 50,000 hours of operation. They do use that military grade construction on the circuit board on these lights, which means they use urethane potting, gives you better protection than common epoxy potting. These are compatible with 12 volt DC systems. They are a surface mount installation, and they do mount using a protective horizontal or vertical mounting cover that we do sell separately on our website, they are listed on this product page as a related product, and the hardware is not included, you would have to supply that, it requires two screws.
Now, when you do put this mounted in a vertical cover, which would be this right, it gives off a 40 degree beam, and when it's mounted in a horizontal cover, gets off a 60 degree beam. This is a two wire connection, it hard-wires your the application, the wire length is about nine inches on this. Few specs on this, and then we're gonna hook it up to show you how bright it is. The dimension, the length on it is right at 1 1/8 inches long, the height is right at 3/8 of an inch tall, and the total depth on it, right at a half inch deep. Light output on this is 32 lumens, input voltage 9 volts to 14 volts, and the power draws only 0.08 to 0.12 amps.
So what we're gonna do now is go ahead and hook it up, power and a ground, and once I got it hooked up, go ahead and turn on my power source, and you can see there's your light, and I'm gonna go ahead and turn off the overhead lights, just to show you the four LEDs are very bright lights. See the pattern it gives off, I am gonna zoom out just a little bit again to show you how the pattern is, the flood pattern design, some wide area. Go back, zoom in, and we'll go ahead and turn on our overhead lights, and we'll go ahead and turn off our power. But that should do it for the review on this TecNiq Waterproof White LED Boat Accent Light with the flood beam pattern..
Just enough light
Just received my order but I am sure they will work just fine I use these for night fishing
Worked just like I had hoped...nice and bright!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.