1. Home
2. Marine
3. Boat Lights
4. Cabinetsx

I do have an option for you but the Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal is not offered with a red lens, only amber part #MCL48AB and clear part #MCL48CAB. For a similar clearance light has turn signal capabilities I…

...'s ridigid and will hold it's shape. You can attach it to your wall or cabinets using one of the mounting brackets listed below: Standard Mount item # TN22VR 45 Degree Mount item # TN34ZR 90 Degree Mount...

The hole for the LED Boat Docking Lights - Recessed Mount - Waterproof - 12V/24V - Qty 2 #TN83ZR is an oval shape. The hole is 4.25" x 2.3" and you will be able to use the gasket as a template to cut the hull. I have attached a dimensional…

The tilt angle is 120 degrees of the LED Boat Docking Lights #TN83ZR.

The Vesper Steel Modular Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black item #TA65VR and the Dexstar Steel Mini Mod Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black item #AM20761B you referenced do not have individual…

Hello Eric. For the SeeLeveL Sensor for RV Holding Tank Monitor #SE78VR, the blue wire is for the tank sender signal and the black is for ground. As long as they are wired correctly, they will work with any monitor including your ESP8266.

The cushioned equalizers included with the #K71-657-00 E-Z Flex Suspension Upgrade Kit are 2-7/8 inches tall, which would lower your trailer by a half inch, which will only lower your ride height by small amount. The kit includes the shackles and…

The Dexter EZ Flex kit part #K71-657-00 that you referenced is a triple axle equalizer kit that comes with cushioned equalizers that are 7-3/4 inches wide from bolt hole center to bolt hole center. You may have ordered the #K71-656-00 instead as it…

The Dexter E-Z Flex Suspension Kit part #K71-656-00 is designed for a triple axle trailer with 33" axle spread which is the distance between the axles on center. I don't have a way to look up the axle spread for any one trailer but so long…

For your upgrade in trailer suspension on your triple axle Weekend Warrior toy hauler I recommend the E-Z Flex Triple Axle Suspension Kit with 7-3/4" Equalizers #K71-657-00. This kit comes with all the equalizers and hardware you need. Then you…

For a triple axle trailer with 6k rated axles the correct Dexter EZ Flex is the part #K71-656-00. The #K71-657-00 would be for 8k axles. I attached an install video for this kit for you to check out as well.

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…

I do have an option for you but the Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal is not offered with a red lens, only amber part #MCL48AB and clear part #MCL48CAB. For a similar clearance light has turn signal capabilities I…

...'s ridigid and will hold it's shape. You can attach it to your wall or cabinets using one of the mounting brackets listed below: Standard Mount item # TN22VR 45 Degree Mount item # TN34ZR 90 Degree Mount...

The hole for the LED Boat Docking Lights - Recessed Mount - Waterproof - 12V/24V - Qty 2 #TN83ZR is an oval shape. The hole is 4.25" x 2.3" and you will be able to use the gasket as a template to cut the hull. I have attached a dimensional…

The tilt angle is 120 degrees of the LED Boat Docking Lights #TN83ZR.

The Vesper Steel Modular Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black item #TA65VR and the Dexstar Steel Mini Mod Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black item #AM20761B you referenced do not have individual…

Hello Eric. For the SeeLeveL Sensor for RV Holding Tank Monitor #SE78VR, the blue wire is for the tank sender signal and the black is for ground. As long as they are wired correctly, they will work with any monitor including your ESP8266.

The cushioned equalizers included with the #K71-657-00 E-Z Flex Suspension Upgrade Kit are 2-7/8 inches tall, which would lower your trailer by a half inch, which will only lower your ride height by small amount. The kit includes the shackles and…

The Dexter EZ Flex kit part #K71-657-00 that you referenced is a triple axle equalizer kit that comes with cushioned equalizers that are 7-3/4 inches wide from bolt hole center to bolt hole center. You may have ordered the #K71-656-00 instead as it…

The Dexter E-Z Flex Suspension Kit part #K71-656-00 is designed for a triple axle trailer with 33" axle spread which is the distance between the axles on center. I don't have a way to look up the axle spread for any one trailer but so long…

For your upgrade in trailer suspension on your triple axle Weekend Warrior toy hauler I recommend the E-Z Flex Triple Axle Suspension Kit with 7-3/4" Equalizers #K71-657-00. This kit comes with all the equalizers and hardware you need. Then you…

For a triple axle trailer with 6k rated axles the correct Dexter EZ Flex is the part #K71-656-00. The #K71-657-00 would be for 8k axles. I attached an install video for this kit for you to check out as well.

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…