Most Popular Manual Jack for Toyota Tacoma

I drilled two 3/8" holes in the top of the rail and used two stainless bolts to hold it on. Works very well for this application. It folds and holds the trailer for loading, and if I have to leave it somewhere, and don't want the tongue sitting on the ground. I used it on a Harbor Freight 4x4 trailer I am building to pull with my Can-Am Spyder. Love it!!!

I purchased this jack for my 2010 Escapade Elite trailer. I finally installed it yesterday. After a quick and minor modification, it fits great and funcltions like a charm. I highly recommend this product to other MC trailer owners. Thanks, etrailer.com for the quality and price!

The product is easy to install. It should be redesigned to allow more space between the trailer and the ground pad when in the travel position. There is interference between the pad and trailer that does not allow full locking in the travel slot. See pictures. A spacer for mounting would improve this feature.

I'm using the jacks to level the tailgate on my trailer so it can be used as a deck. They are easy to adjust for terrain variations

if I had to rate this upgrade in difficulty one being the easiest five being the hardest, it would be a one. Super simple. Take the nuts and bolts off your old hardware and install the upgrade in its place. I read some of the reviews were people were annoyed with the counter clockwise rotation and the bolt sticking out too far. I really didn’t see a problem with either. I know you’re not supposed to use a drill to extend and retract these but I always have. I suppose as long as you’re not torquing the heck out of the adjustment screw you shouldn’t have any problems. I always put a small flat 2 x 6 piece of wood under the foot of each one of these. It seems to add quite a bit of stability.

The jacks themselves have worked great, they keep the trailer level and solid during our concession events. I just had them mounted to the trailer so I don't have to put them in and out at each event. The jack handles leave a bit to be desired so I use a 20v drill w/ a 3/4" socket to run them up and down.

Fast Shipping and delivery, worked great as replacements for my old worn out stabilizers

Quick shipping. I will be ordering more parts as I need them for our RV.

Great product. works just fine. The problem I had was matching the mounting plate under my trailer. Apparently not a standard so I had to take it to a trailer manufacturer to make it fit.

They went on a custom made trailer build that’s not yet in service. Seem to function as advertised.

These jacks are very well built and are strong enough for the job. I can't say how they will work for a large camper. I removed a shell, which required some creativity because the tripods are in front of the wheels, and impossible to drive the truck out from underneath. See pictures, they are worth a million words.

My husband is thrilled with the truck camper jacks. And the price is great too. Thank you.

Our camper came with stabilizers only in the back. Once we level it we put these under the front corners and it gets rid of any movement in the camper like you get when front is only on tongue jack.

Light but strong, Just what I needed. QUick service

Works great for a small camper. Easy to adjust and deploy. The stacking and storing is nice. I chose this option because we tow off road a lot and the less attached to the bottom of the camper the better!

These Jack's made both building and positioning my teardrop onto the trailer bed easier. At campsites they easily level the trailer. So yes I'm happy.

Absolutely a breeze to replace the old jacks. They hold the trailer up with ease.

These stabilizers are much better built that the ones that came on the trailer. The lift components are sturdy and the screw shaft is bigger diameter.

leveling jack was delivered very promptly and in good shape. installed on my 5th wheel easily and works fine. a bit lighter duty than the OEM jack but darn good value for the price and will get the job done. etrailer is the best!

Very happy with the quality and craftsmanship of this jack. I was confident in its durability and ability to do the job from the moment I opened the box. Installation was a snap, using self-tapping #14 bolts (not supplied), and my leveling blocks made it easy for one person to install. Once installed, the combination of the four jacks, the double axle, and the tongue jack all gave my 25' 4500 lb trailer a very stable feel. I would highly recommend this jack to anyone looking to replace the cheaper stabilizers that usually come with new travel trailers.

Etrailer is consistently great, but quality control at Brophy is extremely poor and they unfortunately don't stand by their product. The two main issues I encountered were (1) welded joints that are meant to be square that are more than 15 degrees out of square and (2) a soft steel is used in all of the winch components. When I attached the handle, the threads on the pin stripped. Yes, I tightened it firmly. No, I did not use excessive force. In addition to soft steel, that pin is flattened on two sides, so there aren't many threads remaining, and they supply a very thin nut, so it's only grabbing a couple threads. I contacted Brophy directly and spoke with John, who (I'm still laughing) told me he's worked there 15 years and never heard of anyone stripping a bolt on the handle. Then, after taking 24 hours to confer with his team, he abrogated responsibility and sent me a link where I can buy a replacement winch. I understand that they use a supplier for the winch assembly, but a company with integrity would ensure that all aspects of their product work. They would use their leverage with their supplier to ensure quality control and get a different supplier if need be. Anyway. The Brophy cable camper jack CJ41 is made cheaply and if you still decide to buy from Brophy, I hope you have a better experience than I did.

"Box was badly damaged on arrival. I opened the box and discovered the lift tubes were not there. After contacting customer service they let me know the missing lift tubes were in separate shipment. Customer service was kind and very friendly and got the tracking number of the separate shipment. They gave me the new delivery date and said I could call anytime for updates. Everything came as it should be despite the boxes being pretty beat up. That's really the only reason for 4 instead of five stars. etrailer's dedication to customer service is far above industry standards in my opinion and would definitely recommend them for this alone. I'll post another update with the jacks in use."

Work great and good backup to electrical Jack. Our electricals were not working but now are. Hopefully, they remain as backup as have to handcraft or additional support.

The jacks were well packaged and shipped out fast. I got these to replace tho ones on my camper and they bolted right up.

I mounted this Stabilizers Jacks to the back of a 4x8 utility trailer. I use the trailer to haul my Honda ATV to MotoAmerica motorcycle races. Once the ATV is removed I lower the jacks and mount my tent inside the trailer. These stabilizers allow me to safely move around in the tent without fear of the trailer tipping.

Does not ratchet up, a pin must be manually inserted. It only came with one 6" long pin, which needs to be cut in half to make these stands functional. This is more like a folding jack stand, but the pin is not connected to the stand with a lanyard. I will be cutting the bar in half and welding a washer to hold it in place. I will also need to add a lanyard to it so I don't loose it. I would not recommend this product, but I have not found a better substitute for my application.

The Brophy jacks were strong, stable, easy to position, and easy to lift and lower my camper. it is a much better method than having four jacks to maneuver. And it cut down my time to 30 minutes total to load my camper instead of an hour and a half! I have to start from my garage and winch my camper down on a cart to the street face because of the incline driveway is so dramatic and my camper won’t fit in my garage if it is attached to the truck. I couldn’t be more happy they were great and now I have my truck loaded with my very modern camper and I’m enjoying quite the holiday! I’m using the 3 ton 67 inch trophy jacks and I’m lifting an 800 pound gross camper. The stability is outstanding.

Great directions for manual assembly, quality metal and parts. Solid and exactly the heavy duty I was looking for to use with my slide in truck camper.

After I got lazy and did not fully lift the rear Jacks on my 5th wheel trailer I had to move it and needless to say destroyed them. The new ones I got from Etrailer were just what I needed, 10-15 minutes to bolt both on they extend and retract very smoothly. I couldn’t be happier. (Unless I didn’t get lazy and cost myself some cash)

I am very impressed on the customer service and the way the follow up on your order. It is very important in good client customer relations and I will be getting more from etrailer Also the quality of the product is above what I expected so thank you on that I do and will recommending e trailer to any and everyone thank you e trailer for such an outstanding experience Joey Glover

eTrailer went the extra mile to get this back-ordered product! I really appreciate their efforts!

Installation photo

Replacement for bent camper stabilizer jacks, these work great.

Very solid and well built, exceeded my expectations. Mounted tonight and the camper is now solid as a rock when parked. It only had rear stabilizers previously and at 19 feet needed the stability in the front. Wifey says previously it felt like she was on a water bed when I was walking in the back. Not any more!

I also received this in a couple days. It is really a good strong 10000 lbs jack. I can’t wait to get it out on.

Fast delivery

After receiving the packages was very severely damaged and there was no Jack.Stand crank and no nuts and bolts.Don't know what else I miss

I bought 2 sets of these to level & stabilize a 7500lb smoker trailer (1 in each corner). though they do stabilize, They don't lift to level it off (meaning by inches), the weight/load rating paired with the word "Jack" is misleading. I had to use other "Jacks" to Level it first. This trailer is stays mostly on the pad I built for it on my property, and they work well once situated.

This was installed on my 3 point back blade and should work well for storage. It looks to be well enough made and hopefully provides many years of service. My Land Pride blade had holes in frame for a stand so I used those for mounting. By welding stand housing to a flat plate with matching holes it was simple to install. I did however mount it fairly high allowing back blade to turn fully around for reverse usage of blade. This will eliminate my routine of dropping it for storage and looking for a 5 gallon bucket to keep it at height.

Added a pair to the rear of my 10x5 landscape trailer and they work great. Units were installed by a professional welder and I did the touch-up black paint. Plan to add two more units to front corners for wheels off storage.