Best Lincoln MKC Bike Racks

This is a well designed rack. Adding and removing bikes is quick & easy. Just set the bike on & slide the padded hook down onto the bike frame to secure it; no straps required. If only one bike is transported, it does not interfere with opening the trunk on our Tesla Model 3. With 2 bicycles the trunk cannot be opened. For 2 bikes the Swagman model that can tilt might be worth the extra 22 bucks. This rack uses a bolt in the receiver hitch instead of a pin. This locks it securely preventing it from moving in the hitch & rattling. It also requires a wrench to remove it, good for theft prevention but one more thing to keep track of. For storage on the vehicle the top bar folds down. For storage in the garage, the left & right bars fold up & you can hang it using one of the hooks.

So far so good. The rack wiggles a bit, but that is expected. I have it on my 2007 Corolla and I have hit 65+ on the highway with it and have not had a problem. I would recommend getting a locking pin. The one included is threaded, which aside from security, makes it harder to take the rack on and off. I would also look into a DIY way to secure the wheels better. I am using some bungee straps which do the job no problem. The two bikes I carry are at the racks capacity.

I just installed this on Friday and we used it for a short trip to the bike shop. So far, it is not bad. I had to laugh; Yakima applied their logo upside-down! I read the directions at least 3x to be sure I didn't have them reversed...I did it right. The directions also show a logo on both, upper & lower rack. I guess they wanted to save some $$ ? Assembly was easy with just three steps. The hitch has a lock to lock it to the car, which is great, but the cover won't stay on. It takes 2 hands, one to hold the lock in place and the other to try to put the cover over the lock. It just pops off the second you release pressure. I will try again in warmer weather, then tape it on so hopefully it will mold to the lock and eventually stay put without the tape. I am not convinced of the stability of the bikes, really. Going over bumps they do shake. For safety, we are going to add straps from the luggage rack and through the bikes, just in case. I really like the cable locks to secure the bikes to the rack. With our old rack there really wasn't a way to lock the bikes to the rack, and I always worried when we were traveling and stopped for food.

Best bike rack ever! Solidly built, reliable, sturdy. Plus the customer service of this company is outstanding. They are knowledgeable, keep you informed, respond to emails quickly and satisfactorily. Definitely will continue being my go to company!

I was sent additional mounting materials that don't correspond with my hitch or my bike rack. See the photo below. Are these materials for my Swagman STC2 Bike Rack Item #S64670?

Very stable and simple to use bike rack that works great with my road bike AND with my 29" Big Rippers. It makes loading and unloading the bikes a snap and they are safe and secure for traveling once loaded and secured. I have already logged over a thousand miles hauling bicycles with this rack and highly recommend it. I am a big fan of Yakima roof racks but, honestly, wish I would have went with this setup for my bikes from the beginning.

When I started the search for a bike rack, I was so disappointed and upset to hear that I would need to install a hitch and spend even more money to buy another bike rack for my 2016 jeep renegade. I ordered this bike rack with a little hope but got a huge surprise! Not only is it super convenient and easy to install but I can fully use my trunk and not spend a ton of money!

Very nice, works well. The only thing that was an issue was with the "Anchor" part of assembly. The straps it came with were 2-3 ft. too short. So I had to replace/substitute my cargo straps for the Yakima top straps. Other than that, I'm pretty satisfied with this item.

I installed this rack onto a Curt trailer hitch which is mounted onto a 2017 Honda Fit. I have been using it intermittently for several months, probably about 5 times with one bike and twice with two bikes. I give some pros and cons below and then elaborate. Pros: easy to assemble, easy to mount and dismount bikes, easy to lock and unlock, how to put the rack into different positions is intuitive Cons: inconvenient to put the rack into different positions, inconvenient to mount the rack onto the hitch, rack protrudes about 15 inches from bumper when in flipped up position (seems very vulnerable to someone backing into it in a parking lot, very inelegant looking I say the repositioning is intuitive because there is really only one way you could possibly place the pins for each position. But removing and replacing two pins is much less convenient than turning a knob or a lever, like some racks do. Also many racks fold and flip in such a way as to look very unobtrusive when in non-use mode. This one looks like kind of a monstrosity. That does not really bother me but it might bother some owners. The part that does bother me is how far it protrudes from the car. I back into parking spaces whenever possible to avoid someone bumping into the rack and damaging it (which happened to a friend). My number one suggestion for Curt is related to mounting the rack onto the hitch. Make it easier to tell when the holes are lined up so that the bolt/pin will fit and thread. As it is now, if you insert the rack as far as it can go it is way too far in. Ideally, it would be exactly lined up. Failing that, maybe some kind of click or other feedback to know at least that you are in the neighborhood. It would also be great to have an attaching device that is easier to fasten and unfasten than is the bolt/pin. Tip for mounting the rack onto the hitch: I assumed that it would be awkward to hold, what is it 46 pounds?, while trying to line up the rack probe with the receiver. If you have a garage with exposed collar ties, my solution could work well for you. I looped a cargo strap over a collar tie. Then I hooked both hooks of a bungie onto that loop. The idea is that you hook one of the bike frame holders of the rack onto the bungie, suspending the rack a few inches off the garage floor. This takes most of the weight of the rack so that you can just pull up or down and forward until you line up with the receiver. Tip for mounting bikes. Don't put the little screw into the post that prevents you from completely removing the bike frame holders. Remove both holders. Position the first bike, slide the holder into place, position the second bike, slide the holder into place. I found this makes it much easier, because you avoid parts of the bike hitting the holder as you are trying to get the wheels into place. The trick is that if you are mounting only one bike, don't forget to put the second holder back on - or maybe just stick it inside the car right away.

Have used mine several times in the past 2 years on the back of a ‘21 Honda Pilot and a ‘19 Ram 1500 Classic. I really like that the platform will tilt downward allowing the Pilot rear hatch to open with no interference. The tailgate on the Ram doesnt open fully even with the platform tilted downward, but that is a Ram problem & not a Curt problem. Was well worth the money.

This rack has worked out perfect. IT holds 2 bikes with ease yet folds into a fairly flat package when not in use against the back of my vehicle. It is light weight yet very sturdy and well built. I have had strap on bike racks that worked but this one is much easier to load and unload our bikes. The only con is if you don't have a hitch mount you will need one but that allows you to get other accessories like the luggage rack I also purchased from them which frees up space in the inside of my small car. If your on the fence it came well packaged and fast. I did allot of research and this rack gets 5 stars all the way.

Nice customer service and good product.

Extremely well made hitch rack. Fantastic service from etrailer.com

Works well for transporting two 29" wheeled mountain bikes. However, after one year it's starting to rust in several areas (see attached photos), and the front wheel arms are becoming increasingly difficult to raise and lower. Finally the locking cable is extremely rusty as you can see in the attached photo. I'm not sure how durable this rack will be long term.

I've been looking a eBike racks for about a month and finally decided on this Swagman rack because it's rated for use on an RV. That's what I needed because it will be on the back of my travel trailer. I had it on my wish list on another site but etrailer had it for $[XX] less, so I jumped on it. It was fairly easy to put together, I installed it on the hitch on my truck so I wouldn't have to wrestle with it on the floor of my garage, that made it easy to assemble. This rack is very well built, and is very solid, it doesn't move while on the hitch on my truck (I installed the RV hardware) so I have no doubt that in will be fine on the back of mhy travel trailer.

So far so good! I have used it on the back of my Jeep Grand Cherokee and on the back of our travel trailer. It is a pretty solid e-bike rack. I would definitely recommend this e-bike rack. We did purchase it for using on our travel trailer, but also works great on the back of our cars, which have 2" hitch receivers. On the travel trailer we also installed a Draw-Tite Hitch, along with a Curt 14" hitch extender for 2" trailer hitches and a Malone anti-rattle hitch lock system. We purchased everything from etrailer. I am very happy with how all of this works together for hauling our e-bikes on the back of our travel trailer.

For the price, the quality really isn't there. The tail lights are not weatherproof and use clunky incandescent lamps which are a PITA to remove. The backup light is only implemented on the right side. Both could have had backup lights for the addition of one bulb and the connection of one more wire. And the mount doesn't really fit my step-through Specialized COMO ebike. If the frame had been slightly higher, that would have helped a lot. If I'd been able to try the rack locally, I would not have kept it. But the cost to return makes that prohibitive

My husband bought the bike rake specifically to carry out 2 Specialized Ebike’s which weight 62 to 65 pounds each. MWith this rake I don’t have to lift my bike up which is great when I’m alone. The only problem I’ve had is the outside bike straps. One of the ratchets broke and E-Trailer was wonderful in helping get us a replacement. My husband put the new one on. I do have friend’s that will be purchasing them in spring. The only complaints I have would be to Saris. Placement of the outside straps. It’s awkward latching them. Also, when my husband bought the rack the maximum weight load was more. They changed it to a lower amount.

We love this rack. Both my wife and I use it all the time. I can mount and remove it in less than 5 minutes. I often transport 2 substantial ebikes. When we ride together, either of us is able to load and unload both of our bikes in less than 8 minutes. This is a solid rack and the price was definitely right. And when not in use it folds up neatly behind the bumper.

Excellent bike rack. I had a very small issue trying to hook up the hitch part, but all went well. Also, I received excellent customer service from Sara. She was very helpful and extremely friendly. It was a pleasure receiving great customer service from Sara.

The Thule Passage Trunk Bike Rake for 2 bikes is a good product. I used it to transport my mountain e-bike. I choose this particular unit because it can handle the weight 2 of bikes (non-e-bikes) and the weight of my e-bike is equivalent to weight of 2 bikes. Note: Must readjust the straps after mounting the bike to the rake.

great! works really well, and a lot easier to attach than I anticipated. We drove with bikes across the country from south west all the way to North east. solid rack!

I like it a lot! I think it has solved my issue with having in easy, yet stable way to haul my bike on my 2012 Honda accord coupe. It's only been one day, so I can't speak about the durability. But it's definitely use a friendly and sturdy.

I looked at a LOT of bike racks, but when I saw the product video for this Hollywood rack and it was holding the bikes rock solid, no loose bouncing anywhere, I decided to try it and I haven't been disappointed yet. It is solid in the mount, it holds the bikes securely and the locking bars are a good deterrent to anyone wanting a quick steal. I don't leave mine on the car all the time, but so far in the weather here in Florida, it's holding up nicely. Add all this to the great price and customer service from etrailer.com and it's a big win for the average consumer. Thanks, etrailer!

Seems like a good rack for the price, especially when compared to others with the same weight rating. It was very easy to assemble, just a few bolts and that's it. I put two 62lb e-bikes on it (Ride1Up Turris) and it has minimal wobble and movement as expected. The straps that come on the center cradles were too short to go around our bike's frame and battery so I had to purchase a separate set of long straps from Saris for an additional $20. So be aware if you have an e-bike with a fat frame where you plan to use the cradle on, you might have to spend another $20 on a pair of long straps. While I waited for the straps I just used a velcro-strap and it worked fine. So far I am content with this rack overall and hope it lasts many years.. I gave it 4 stars instead of 5 because I had to purchase additional straps to make it work.

I had to put my electric bikes into this rack, backwards, to make them fit. Not ideal, but it works.The receiving 'trays' that are intended to provide support for holding the bikes, by being placed under the bike tires, are forced to be moved to a location that is not directly under the bottom of the bike tires. While it works in this manner, it is not ideal.For the support that attaches to the diagonal bike frame, we had to remove it from the vertical rail of the rack. We reinstalled it, upside down, because that's the only way we could make it fit, or 'grab', the bike frame. Again, we made it work, but it's not ideal. We chose to keep the rack because it was so much less expensive than the Thule rack we considered buying. The bike shop owner didn't agree with us. He observed that we are putting $3000 worth of bikes on the rack and risking that investment. So far, no problems, other than the ill-fitting installation.

Super easy to load 4 bikes and go. Takes me 5 minutes to get all 4 on the rack, compared to 15-20 with the rack I had before. I would change nothing honestly. It's a fantastic rack. It has performed great. I can now quickly load 2 kids bikes and 2 adult bikes on the rack with no special adapters. We can hit trails faster and spend more time riding. There is no real downside. It's also significantly cheaper than competitors and provides a much easier and smooth experience. Is it a great rack for small families who want to ride together. No adapters needed for different sized bikes and super easy to load and unload. I would not recommend this particular model if you don't plan on using more than 2 slots. But for 3 or 4 it rules.

One year in and it is great. I have a 2021 Subaru accent and it is perfect. We carry 4 adult bikes and while it is a tight fit it works great. The rack is VERY solid and does not move when tightened up. Over the past year we have used it 3-4 times with no issues so far. It is easy to use and one person can easily load and unload the bikes. The tilt up feature is nice and when the rack is down and there are no bikes we can open the back hatch without an issue and there is plenty of clearance. We have been very happy with the performance and the price.

Fantastic bike rack. Switch it between a Honda Ridgeline and a Subaru Outback Wilderness and it works perfectly. Accidentally lost the locking pin that secures the rack to the trailer hitch and when I inquired with Kurt about ordering a replacement lock keyed to match the locking cables on the rack and the Kuat rep sent one to me for free. (I removed the rack and left the lock sitting on my car bumper. Later that day I drove off and lost the lock on the highway).

Great bike rack. It is easy to install the hitch on a vehicle and to remove it. The Kuat NV 2.0 provides a smooth, gentle ride for road bikes and mountain bikes. Great purchase. Highly recommend.

I'm a repeat customer of RockMounts and Etrailer. You can't beat RockyMounts products and build quality and you can't beat Etrailer prices, shipping and customer service. Awesome!

Great product and easy to put together. I did notice that when using the 1.25” hitch, there is a little bit of play with the hitch moving north and south. Not overly concerning though as I have read that a little bit of play is normal. Additionally, riders who use a mud fender on their front fork might have a bit of trouble getting the swing arm snug as can be. I recommend removing your mud fender from the front fork before traveling for the most snug fit. 4/5 due to the little bit of play with the 1.25” hitch. All together, the rack is affordable, and works great. Would recommend to a friend.

Heavy duty. Well made and designed. Easy to install and load. Just arrived so I’ll let you know about the durability.

Great rack! Fits the receiver on my '22 Outback perfectly. My bike(s) ride stable and secure. I also have a Specialized e-bike that weighs 36 lbs., and the rack handles the weight just fine.

Neat design. That's the only positive. Shows up in a million pieces. Surface rust on some of it already. Need a hammer to use "quick release" pins to pivot. 1 1/4" adapter is not long enough for either car I tried, unless your hitch sticks out PAST your bumper don't even bother. Had to trim 2" section of rack to make it fit hitch. Had to grease pivot section because rough surface finish would NOT allow rack to pivot. If I didn't need it (and didn't spend 2 hours assembling) I would have sent it back. Worst bike rack I've bought since a K-mart contraption 30 years ago.

The bike rack is made for bikes with no fender, our bikes have fenders and a rack over the back tire. We added some padding for the back tire so the rack doesn't get scratched, it works just fine our bikes are secure.

Good mount over-all. Item was delivered without the packing straps. Not sure if the package was opened prior to shipping. There were no missing parts. The mount seems to function normally. I do have one complaint - the mount is not level when attached to my Ridgeline 2" hitch. My hitch is in perfect condition - unused prior to the purchase of this mount. The mounting bolt for the hitch is fully tight, but still the mount is crooked to right by 1 inch. Oh well - not a deal breaker.

We have two e-bikes and researched for a rack substantial enough to carry them long distances. The RockyMounts Monorail is doing the trick. We remove the batteries and seats. Based on other's advice, we put pieces of foam pipe insulation over the straps and braces that contact the bikes. Also, just for overkill, put additional cinch straps over the front tire rim at the wheel support. I also fabricated a license plate holder because the plate is obstructed on the SUV. The quality of construction and ease of assembly are both outstanding.

The rack is compact when folded up and the tilt function is very handy when driving an SUV for access to the rear door. It's solid and rugged. And at less than $200 it's a real bargain. I would have given it five stars but for the fact that, if you want to lock it to a 2" hitch receiver you must buy a separate locking threaded hitch pin for $37.50. The provided hitch pin will secure the rack but the tip does not protrude far enough to place the provided safety clip on it. Not a problem if you have a 1 1/4" receiver. And if you do opt for a locking hitch pin be sure to order the Part Number: S64029. The other optional 2" hitch pin Item # S64027 not work on this rack!

This should be a good bike rack, have the heavy duty one for our fifth did what it was suppose to do. I ordered this and the reciever hitch for my wife’s 2017 Honda CRV everything went together just like your review videos. Great job!!