# 1
Hitch Extender For 2" Trailer Hitch Receiver 7"
I use the extender on my bike rack so I can access my tailgate and truck bed with the rack on. It does what it supposed to do and looks barely used although I travel to trails twice a week.
Good quality, heavy duty took a couple extra days to get here otherwise great product
# 2
Hitch Extender for 2" Trailer Hitches - 8" Long
Just received my 80307 Hitch Extender for 2" Trailer Hitches - 8" Long. My newly upsized spare tire had been preventing the use of my hitch rack. Was very pleased with the etrailer service and the ease of using the website. The excellent descriptions, photos, and even videos really help shopping for these types of specialty parts. Shipping went well and expediently. I trial fit the extension with my hitch rack today, and the photos are attached. It fit well and did the trick. I drove around and heard no rattles from it at all.
Appears to be well built and sturdy. I’m sure it will accomplish what ineeded
# 3
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
Was looking for a way to carry 2 e-bikes on a Hollywood rack, and tow my Jeep, behind my Class A RV. This dual hitch looks like it will do exactly what I want, at least when doing my test set-up. Only reason I didn’t give it a 5star is because when the rack and Blue Ox tow bar were installed, there was significant “slop”. I resolved this problem by buying an adapter at the local hardware store, and it is now tight as it should be.
Exactly what I needed. Now able to add storage box and still pull tow Dolly.
# 4
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 2" Rise/Drop - 10K GTW, 400 lbs TW
Works well on my 2014 Wrangler Unlimited. Yakima Swing Daddy - 4 bike rack. I am able to open the gate completely until it locks.
I run a motorhome during the summer. I changed towed vehicles from a Truck to a SUV. This Hi/Lo receiver is what I required to ensure a straight tow. I went with the heavier 10K rating. Etrailer may not be the cheapest on the net, however very reliable. The picture shows the finish tow setup. The piece above everything is a motorcycle lift.
# 5
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.
I would like to tell you about my experience with etrailer.com. I am a return customer because I always find what I need at reasonable prices, quick and inexpensive shipping charges. I ordered this for a 1999 GMC Safari to fit my new Draw Tite hitch. I use it for my bike rack which fits like a glove. I highly recommend etrailer.com. I feel they are a very good company to deal with because I get personal service which is uncommon these days.
# 6
Advantage SportsRack Hitch Extender for 2" Trailer Hitches - 11" Long
Great product, simply gets the Job Done!! Spare tire on Jeep Rubicon, no impediment, no problem!!
Great customer experience. I had issues with my address and Kurt and the team for and solution. Also great to resolve on a Saturday.
# 7
Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop
This is a much higher quality (thick and heavy) than I imagined it would be; I'm pleasantly surprised. I'll be using it to mount a trailer hitch cargo carrier and a dog step at the same time when we go on long vacations.
The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.
# 8
Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
Excellent hitch extender, very well built, arrived quickly.
Everything worked out great.
# 9
Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
Would have given this 5 stars if it weren’t for the packaging and minor shipping damage. It was just stuck in a box that was way way to large for it, no padding or anything. I’m amazed it was even still in the box all things considered. But that said the extension itself is very well made, super solid.
Just received the 41/48 inch hitch extension today so haven’t actually used it. However, one can tell the high quality by looking at the welds and thick paint coating. This item is extremely heavy. I expected some weight to it, but it surprised me. Also, the tubing has very tight tolerances. I have two ball mounts, neither of which slid into the extension on their own. I had to pound them in and tap them out with a 3 pound hammer. Once paint and labels were scraped away by this action the ball mounts were able to be slid in by hand. This extension will be used on my dually carrying my truck camper. I’ll be towing an aluminum trailer with a Can Am Spyder. Total weight towed will be less than 2000 pounds so I don’t expect the extension to be subjected to any stress.
# 10
Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long
Work great! I needed an extension due to my truck camper. It holds my heavy duty bike rack and 2 ebikes with no problems.
I was surprised by just how solid and heavy it was made. Just what I needed to move my Bobcat UTV hitch back to I can use it as my yard dog to shift my trailers around and not worry about the plastic tailgate nor the plastic bed getting damaged. The hitch sits under the bed and this extends it out so it is useable.
# 11
Hitch Extender For 2" Trailer Hitch Receiver 14" Long
I have cargo trailer when hooked up to my F150, the tailgate if lowered would hit the trailer lift jack. This heavy duty solid extension reciever added an additional space which resulted in several good features. One and most obvious, the tailgate opened fully. The other is that the turning or backing radius was increased. This a solid piece of metal. Would recommend.
I would like to have the actual distance from the weld joint to the hitch pin hole of 4 1/2". This unit is slightly less than that.
# 12
Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
Have not mounted it yet but it’s what need to flatbtow a jeep behind my truck with a Lance camper
Have not used the product yet but am confident it will work as expected. Paula was extremely helpful and provided good support and advice. Will definitely shop eTrailer again and would recommend as well!
# 13
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
etrailer's Customer Service, Delivery, and Quality Products are Great! Every question and concern I had was promptly replied to and was rectified
Great product. Correct fit. Arrived fast and it is exactly what we were looking for. Thank you.
# 14
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
Based on an initial fit, the bike rack stinger is a bit loose in the reducer. If tightening the threaded pin does not reduce the wobble, I can add some shims since I intend to keep the reducer mounted on the bike rack. The reducer is an easy fit into the 2" receiver - the Quiet Hitch removed any movement.
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
# 15
Curt Extender for 2" Hitch Receivers -18" Long
I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!
Works great. Gives me the space I need to swing my Jeep's tail gate open further so I can access the rear cargo area. One thing that would make it a five star would be safety chain rings welded on so I didn't have to buy more chain to extend the already very long chains all the way to the bumper, which leads to a lot of chain dragging on tighter turns.
# 16
Roadmaster Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
I have included some photos of the hitch extension. The first two are just on my truck without and with the extension. Without the extension, note the proximity of bike handlebars to the tailgate. In the second photo with the extension, the handlebars are much removed from the tailgate. Note that this is a ¾ ton truck with an insert in the receiver. With the insert in place, the front holes of extension did not align with the receiver. It was short 1/8 to 3/16 inch. If needed, I could solve this issue with a smaller bolt. The next photos are without and with the extension in the receiver of our RV. With the cover on RV the dramatic effect of extension is not so obvious. In the first photo without the extension, the handlebars of bike literally contact the back of RV. In contrast in the second photo, the handlebars are 5 to 6 inches from the back of the RV. Though there are no road trips yet, I am confident that the hitch extension will protect the bike and importantly will protect the back of the RV. I hope that these comments and photos are useful to you. If no, I can try again in spring when we remove cover from the RV.
My order was shipped within an hour of me completing the online order process and it arrived a day early which was great!
# 17
Reducer Sleeve for Super Titan Hitch Receivers - 3" to 2"
This is a nice fit in the 3" receiver and the right amount of extension. I am finally able to fully open the tailgate while attached to my camper. I am a little concerned it might be too much extension for the safety chains and 7 pin electrical wiring harness. A through test drive is needed
I ordered this 3 inch to 2 inch hitch reducer because I had purchased a new RV and the receiver on the new RV is a 3 inch hitch. My previous RV hitch size was 2 inch. I needed a 2 inch receiver because I am re-using my Blue Ox tow bar which has a 2 inch hitch. Fit perfectly. See pictures.
# 18
Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches
Swing away is built very well! Easy to use and price was good. Should have bought it along time ago.
The Yakima swing arm provided just what we needed to allow the use of the Hollywood RV Rider bike rack behind our 2023 Wrangler JL.
# 19
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 48" Long
The 4 foot hitch performed great. I bought the extra lenght to get it further behind my truck camper, I have a 3 foot hang over. The only problem was this made my 20 foot welded flat boat catch a lot of wind knocking my fuel milage way down. It also does not let my steps fold down. I should have gone with the 3 foot extension. live and learn.
Wow. Who would have believed I could have my heavy 11.5' Camper (which was well stocked, I should add) and pull a cargo trailer loaded with shop tools, workbench, and hardware. Handled well on highways through mountain passes, etc. Assembly and installation should have been much easier but the poor quality of the photos with the instructions was a bit of an impediment.
# 20
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Product quality is fine, however, tried to use with an ebike rack on upper hitch and flat tow hitch on bottom. Vehicle sway at highway speeds was too much, and I found bike rack on back of the towed Jeep was better.
Appropriately heavy for the job!
What our customers are saying:
"Very broad selection and outstanding service."