# 1
Ultra-Fab Deluxe Electric Landing Gear Set - Weld On - 38" Lift - 12,000 lbs
Everything from E-Trailers handling of shipment was smooth and fast. The in-line fuses were broken and very cheap quality. I replaced them with some from O'Reiily's and all worked fine.
I bought this to replace the under powered OEM landing gear on my 2018 39' toy hauler 5th wheel. I received great service from etrailer staff. First time for me to remove and replace landing gear so after 1 or 2 youtube videos I was able to get it done with a little grinding and drilling (and cursing). I've been using the new landing gear for a year now and here are my thoughts: PROS: Ability to adjust the 2 sides independently. Makes leveling much easier. Quality hardware and stronger motors. CONS: The toggle switches that come with it are very stiff and a bit awkward to use. The pin at the bottom of each leg is not attached. You have to pull it out, then line it up with the hole to replace it. All others I've seen have a spring loaded guided pin. The legs don't go up or down any faster than the OEM. Although that was never claimed, I was hoping they would. Overall I am happy with the product. I will say, if I had to do it again I would strongly consider going with the competitor's product for the better controls and spring loaded pins.
# 2
Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2
Great directions for manual assembly, quality metal and parts. Solid and exactly the heavy duty I was looking for to use with my slide in truck camper.
The Brophy jacks were strong, stable, easy to position, and easy to lift and lower my camper. it is a much better method than having four jacks to maneuver. And it cut down my time to 30 minutes total to load my camper instead of an hour and a half! I have to start from my garage and winch my camper down on a cart to the street face because of the incline driveway is so dramatic and my camper won’t fit in my garage if it is attached to the truck. I couldn’t be more happy they were great and now I have my truck loaded with my very modern camper and I’m enjoying quite the holiday! I’m using the 3 ton 67 inch trophy jacks and I’m lifting an 800 pound gross camper. The stability is outstanding.
# 3
Ultra-Fab Ultra Scissor Jacks - 24" Lift - 13,000 lbs - Qty 2
The screw on one Jack is damaged and is in unusable. Would like a replacement. Photo attached.
Definitely a heavier duty version of our campers stock stabilizers. They bolted right up to the brackets and glad we have new stabilizers. I hope the paint lasts on these as that seems to be an issue with the other, cheaper stabilizers. Time will tell.
# 4
Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
Appears to be good quality. Fit in the existing mounts. Drop leg is a bonus over what was previous.
The product itself was great. It fit right in to the brackets from our old landing gear. We were able to use our existing motor as a cross fit with this gear. The gear box was even better than Lipperts as it was not plastic. The only issue we had with this was shipping. We ordered the part same day as our water pump because we were told it was in stock. Low and behold they changed ship date numerous times, with the excuse it was not easy to pick. Anyhow, two weeks later we finally got the part we ordered.
# 5
Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2
This was my second order with etrailer and I have been pleased with the service. Items are shipped quickly and order was accurate each time. The products are high quality and work as described.
Josh was so patient with me. He helped me choose the correct stabilizer.
# 6
Landing Gear Set - 36-1/2" Lift - 8,000 lbs
Customer service and timely delivery were excellent! I would recommend etrailer.com to anyone.
Perfect replacement, works great, excellent shipping time and service. Just wish I had got the electric motor that goes with the legs.
# 7
Ultra-Fab Ultra Scissor Jacks - 30" Lift - 13,000 lbs - Qty 2
After receiving the packages was very severely damaged and there was no Jack.Stand crank and no nuts and bolts.Don't know what else I miss
They seem well built and will do the job that I purchased them for. The installation was fairly simple, I built and welded some mounting brackets to the trailer frame.
# 8
Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 2
Our camper came with stabilizers only in the back. Once we level it we put these under the front corners and it gets rid of any movement in the camper like you get when front is only on tongue jack.
Perfect for the four corner supports of our Jayco 175 RD. Much easier to deal with than the scissor jacks installed on the camper. E trailer got them to us quickly as usual!
# 9
Lippert Electric Landing Gear Set - Weld On - 37" Lift - 6,000 lbs
Received the Kit in about four days (5 Stars for etrailer). The shipping container was severely damaged (2 stars for UPS), but at least it arrived. Did not appear any parts were missing. I ordered this kit because it was less expensive for the complete kit then to replace both landing gear legs separately. I left the 5th wheel attached to the truck and removed the old landing gear, gearbox, and motor prior to the arrival of the new system. Keep all your parts. The new kit arrived and was very easy and straight forward to install. However the tubular steel expansion rod that connects both landing gear legs was too short. I had to use the my old connection rod. Also the spacer used for the inside of the large side of the connection rod was not included with the kit. Had to use the old spacer in the old connecting rod. I used my old landing gear foot plates and pull pins on both landing gear leg extensions. Once installed, the kit worked flawlessly. I placed red marker tape on the landing gear extensions so not to top out the legs when lifting. Again save all your old parts.
My fifth wheel landing gear needed replacement. One side would not work. No information on my unit. However, Rochelle of E-Trailers did research to determine a replacement unit. Was shipped to California in 3 days and I installed. Perfect fit !! Thank you Rochelle. Awesome Customer service and great quality.
# 10
Lippert Scissor Stabilizer Jacks with Handle - 30" Lift - 10,000 lbs - Qty 2
thank you. works perfectly
These worked out great easy to install with the circular mounting plate.
# 11
Brophy Cable Camper Jacks - 57" Max Lift Height - 1,000 lbs - Qty 2
Great product! I was not looking forward to paying $2G for the standard jacks, then having to bolt them onto the camper. Simple, yet effective! Brophy cable camper jacks are absolutely perfect for the camper I have.
Product arrived poorly packaged so arrived damaged but usable. It arrived in one box without the two poles. Directions say poles come in a separate box but customer service said everything comes in one box. That is why I didn’t receive the complete Jack, they don’t seem to know their own product. They are shipping the poles but they are not scheduled to arrive for another week. I not expecting any other problems. I am excited to try them out when everything arrives. Otherwise it appears to be everything as advertised.
# 12
Ultra-Fab Slide-Out Supports for Motor Homes - 16" to 28" - Qty 2
We had so much trouble with the heavy slide out on our travel trailer going out of adjustment .. The trailer spent more time the first two years in the dealership shop or another rv shop than we had it at home.. When we finally got it repaired for the last time my wife checked the internet and found these slide out supports.. We use these everytime we open the slide out at home or camping in the forest or rv park .. And we havent had anymore trouble .. Wish we found these two years earlier .. Thank You fir a great product ..
Product has worked as advertised, Purchased about 1 year ago and have been in use ever since with no issues
# 13
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs
A perfect replacement for my old landing gear. Very few adjustments needed to make the legs fit perfect with my existing brackets and a little drilling for the bolt holes. Now at least I know I'll be able to unhook from my truck.
Product was an exact fit for my application only problem I had was key inside gear box fell out but easily fixed once I figured it out.etrailer was spot on helping me find correct jack for my ca.per works great
# 14
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs
It's nice to be able to push a button and the camper goes up and down
Let me start by saying this review is about the product, not e-trailer. etrailer is great. I love doing business with them. Their prices beat anybody, and the free and FAST shipping is a bonus. Now to the review of the LG-3 landing gear. The pros of this product are they are a direct replacement for the Lippert system on my trailer. No cutting, drilling or welding. They fit in the original brackets. I installed them while camping in about 2 hours with simple hand tools. The cons are they are a direct replacement for the Lippert system on my trailer. They use the same weak motor, that struggles to lift my trailer. The kit was missing bolts and pins and I had to use my old hardware until I could get back to town to buy new hardware. I wanted to go with the Bulldog 10K system, but wanted something that work with my Lippert remote system. The original system failed. I suspect this one will too. Next time I will go with something heavy enough to do the job. Check out the before and after pics and the pic of what can happen when your jacks fail and you have to resort to using hydraulic jacks to lift your trailer. A $4000.00 repair that could have been much worse.
# 15
Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2
I mounted this Stabilizers Jacks to the back of a 4x8 utility trailer. I use the trailer to haul my Honda ATV to MotoAmerica motorcycle races. Once the ATV is removed I lower the jacks and mount my tent inside the trailer. These stabilizers allow me to safely move around in the tent without fear of the trailer tipping.
Does not ratchet up, a pin must be manually inserted. It only came with one 6" long pin, which needs to be cut in half to make these stands functional. This is more like a folding jack stand, but the pin is not connected to the stand with a lanyard. I will be cutting the bar in half and welding a washer to hold it in place. I will also need to add a lanyard to it so I don't loose it. I would not recommend this product, but I have not found a better substitute for my application.
# 16
Ultra-Fab Slide-Out Supports for Motor Homes - 26" to 47" - Qty 2
Great product. Easy to work with and levels the slide so no dropping when extended.
These "quickee" piers are great under our slides. Simply push the button on the handle nut, slide it up and hand-tighten - done! Other products have a knuckle-buster lever. When we arrive, I don't like added set-up time or skinned knuckles. Dennis/Corralitos, CA
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."