Best 2021 Buick Enclave Accessories And Parts

I highly recommend this product. The wiring harness locks into the bracket, and it provides solid stability.

I received the Tekonsha P2 controller and the 2 - click, made-to-fit wiring harness for my 2013 Enclave. It did, in fact, fit perfectly and the controller is a HUGE step up fom my previous non-proportional controller. Installation was literally 10 minutes! (Including reading the very clear instructions). Customer service from Tamara W was exceptional. She confirmed the correct part numbers and answered all my questions. Good price, good product and great service. Reward them with your business !

Installed in a 2008 Buick Enclave. Extremely easy. GM had the harness female end taped up under the dash and only had to be plugged in to operate.

This was recommended in the video so I bought it and used it. Not sure it made a difference but if it had not worked then I would have wished I bought it.

Does what it needs to do for trailer plug connections.

Worked perfectly.

Very helpful in the installation.

Easy on, just what I wanted to keep the wiring harness up off the ground.

Good product, easy installation, manual showings step by step,

Helpful for our non-conforming bike.

I love the bar, it is super sturdy and works perfectly for all of our bikes given the compact frame. I did have my bike on the back of my car with the Thule rack I ordered, and unless it was just super windy that day traveling on the highway, I feel like my bike was swaying while on the bar even though I had the strap between the tires. I have used it since for short trips, but have figured out a way to use the extra strap to run it through the rack and the bike to prevent the bike from pulling away from the car while on the bar.

I bought this one instead of the Thule one. This was cheaper and at this point seems like it will do the job.

Great Bike rack. I've used it now for two months both on my truck and the 5th wheel. Very sturdy and safe. Easy to assemble, hook up and load. One small glitch; my 5th wheel has a window in back and the handlebar came close to the window causing concern of window damage, but my wife found a piece of round foam that works great to help this. (see pic) Glad I researched and got this one. Frame adapter bar works simply for step-through bike too.

They did just fine, I had to use zip ties which held great. Even after driving from Kansas to Vancouver Bc the lights remained in place during the entire trip, which was my concern. I still recommend proper attachment of the lights, I couldn't wait several months for the brackets to be delivered since the trip was before their delivery.

Lights work great for brake lights and turn signals on cargo basket. I had to buy a trailer wire extension because the wire harness was too short to reach the cargo basketdriver side light and the wire harness was excessively long for the passenger side light. The lights fit too loose in the mounts and easily popped out. Had to use zip ties to secure the lights

Great Product, Service, Delivery!

Inexpensive but does what you need it to do. Lights are bright, great safety option. Sometimes the gasket pops out a bit from the cargo carrier space but you can always add some tape to keep it in place.

perfect in every detail

The controller works great, and applies the brakes in a study manner, depending on how hard you’re breaking and what number it’s set too. The installation was a little more difficult than I expected, but that has nothing to do with the product, but more about finding the ideal location for mounting, and still went smoothly. The finished install looks like it came from the factory, with just the adjustment knob being visible. I like how it’s always on and ready to use, but it’s only active when the trailer is hooked up. Super simple to use.

I purchased the Derale 9000 trans cooler to install on my 2017 GMC Savana 2500 to supplement the humorous excuse of a cooler that is installed by GMC. I carry a decent load most time, putting my van at around it's 8,600lb rating due to all of the tools I carry. I very rarely pull a trailer and empty out a good portion of my van when I do. On a hot day last week my trans temp crept to 206° and I decided it was time to do something to help. I installed this cooler yesterday and pulled my 6'x10' cargo trailer 15 miles both ways and the temp topped out at 184° which I think is great considering I had a full load out on my van and a light load in the trailer. The trans cooler is pretty straightforward to install. Mine took a little longer as I pulled my condenser loose to feed the fasteners from the back to the front, other wise I would have had to remove my fan shroud to access the straps to put the fastener buttons on. The most difficult potion was getting the fittings into the rubber hose, but pre-lube with a little ATF amd they will go in with some brute force. The cooler arrived in perfect condition, and appears to be a well built unit. All parts were present and after about an hour and a half or two it was ready to go. Just be sure to have addional AT fluid on hand to top the system off. All in all I'm happy with my purchase and look forward to seeing of it makes as much of a temperature difference as I'm hoping it will.

Auxiliary radiator works great and was very easy to install after looking at etrailers video online. I would have given it 5 Stars if the cheap piece of hose that came with the kit had not blown on the way home from work and sprayed all my trans fluid under the highway.

Gotta have this bracket to mount your 7 pole connector to. But I had a place to attach to on my Draw-Tite hitch and didn't need the self tapping screws, HOWEVER, I needed two additional black screws to attach the connector bracket to the hitch spot. Should come with (6) black screws and two self tappers. I have to go find two additional black screws if able to attach the bracket to the hitch hangar. That's why i didn't give it five stars.

Bracket was a little difficult to mount where it should go.

Fits perfectly. Uses the existing bracket mount on the hitch (Sprinter passenger van version)

This controller came ready to use out of the box, Watched a YouTube video on the installation just to be sure and installed it myself in about 1/2 hour [I work slow} We used it this weekend and it worked flawlessly, seems like it set itself up and just worked great

This brake controller adapter harness fit exactly as described.

The order came quicker than anticipated. I installed chains just before snow storm. Unfortunately the chain tensioners( said 99 LT on package, words fits all passenger and mini van was crossed out in black marker) were too small to use correctly even though it said good for 17 inch rims. One broke when I tried to install it. Rigged chains up with some tensioners I already had and the chains worked beautifully . I looked at your video online after the fact and wound up ordering the recommended TCMA2 tensioners today. Hopefully they will fit.

We ordered these tensioners with a set of Pewag square link, mud service heavy duty chains appropriately sized for our 315/75R16 tires. Those tires have a tall sidewall and so I opted for the tensioners listed for 16 to 20" wheels. However, with those chains and tall sidewalls of our tires, these tensioners lack sufficient reach to get more than three hooks attached to the chains (photo). If you're planning on using these tensioners on a tire with a tall sidewall and a chain that doesn't extend down the sidewall very far (as ours), I recommend mounting the chains and then measuring the diameter of the circle inside the side chains. Call Etrailer with that measurement and see if they can set you up with a tensioner that will fit. Our ordering experience with Etrailer was great - prompt shipping and compassionate customer service when I explained the problem mentioned above.

Will I need to remove, cut or drill a hole in the plastic facia on my seat to install the seat adapter on my 2020 Ford F150?

The parts arrived as expected. The installation instructions were explicit and correct. The parts bolted on the vehicle with no problem.

Snug fit! If you order the KarGard II Towed Vehicle Protector for Blue Ox Motor-Home-Mounted Tow Bars (BX88255) the extended nuts make it very difficult to get the cover in place.

Tow ar cover fits like a glove. Exactly what I was expecting..

These covers fit very snugly in my car's baseplate, should do a good job keeping out debris when not towing.

Great product! I wish I had it a year ago. It will make all the difference on functionality and appearance. Due to steel rubbing on steel the paint wore off and it started resting. These plugs/caps will definitely help keep it clean and protected.

The old lights broke and this kit was the exact match, so I just had to switch out the old lights with the new. Working excellently.

Fast Shipping, very secured packing, Cargo Carrier Light Kit For 52017 and 52018 arrived in perfect conditions, Thank You.

Very good video instructions

Excellent product easy installation