Best 2019 Chevrolet Silverado 3500 Fifth Wheel Hitches

I haven't used the hitch yet, but it was easy to put together with the supplied instructions. It fit the factory pucks just right. The hitch was shipped rapidly by eTrailer.

Have not used it yet, but it seems very sturdy and easy to break down to remove it. It took a little time to put it together, but after it was assembled, it was easy to install and remove. It is quite heavy, but that is a trade-off to get a well made and sturdy hitch. The package arrived earlier than expected and no damage. It was good to go.

This is a great product, easy to install . For those of you that have a extra fuel tank toolbox combo You need at least 6/1/2 to 7 inches from center of puck to tool tank for it to fit. My fuel tank toolbox combo is 20 inches deep or wide that is the most it can be. Included are a couple of pictures but not easy to see as i have a couple of tie straps around tank as well as a bolt down .Also when I have it in the slide back position. Trailer will just barely clear tail gate, but I can leave tail gate down with no problem, it would depend on your trailer.. etrailer is great to work with and have some great videos to help.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I haven't used the hitch yet, but it was easy to put together with the supplied instructions. It fit the factory pucks just right. The hitch was shipped rapidly by eTrailer.

The hitch is extremely well made. Also had this same hitch in 2002 with no problems. Would definitely recommend it.

This is a great product, easy to install . For those of you that have a extra fuel tank toolbox combo You need at least 6/1/2 to 7 inches from center of puck to tool tank for it to fit. My fuel tank toolbox combo is 20 inches deep or wide that is the most it can be. Included are a couple of pictures but not easy to see as i have a couple of tie straps around tank as well as a bolt down .Also when I have it in the slide back position. Trailer will just barely clear tail gate, but I can leave tail gate down with no problem, it would depend on your trailer.. etrailer is great to work with and have some great videos to help.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I needed a new fifth wheel hitch. Etrailer gave me all the information that was needed to make a decision. The price was excellent as well. Everything works as described.

Truly happy with this product and can't wait to go to work! etrailer sent me everything I requested and the installer had no problems. Everything was packed well in shipping with no problems.

Click to Enlarge

This is a great product, easy to install . For those of you that have a extra fuel tank toolbox combo You need at least 6/1/2 to 7 inches from center of puck to tool tank for it to fit. My fuel tank toolbox combo is 20 inches deep or wide that is the most it can be. Included are a couple of pictures but not easy to see as i have a couple of tie straps around tank as well as a bolt down .Also when I have it in the slide back position. Trailer will just barely clear tail gate, but I can leave tail gate down with no problem, it would depend on your trailer.. etrailer is great to work with and have some great videos to help.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I haven't used the hitch yet, but it was easy to put together with the supplied instructions. It fit the factory pucks just right. The hitch was shipped rapidly by eTrailer.

This is a great product, easy to install . For those of you that have a extra fuel tank toolbox combo You need at least 6/1/2 to 7 inches from center of puck to tool tank for it to fit. My fuel tank toolbox combo is 20 inches deep or wide that is the most it can be. Included are a couple of pictures but not easy to see as i have a couple of tie straps around tank as well as a bolt down .Also when I have it in the slide back position. Trailer will just barely clear tail gate, but I can leave tail gate down with no problem, it would depend on your trailer.. etrailer is great to work with and have some great videos to help.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I haven't used the hitch yet, but it was easy to put together with the supplied instructions. It fit the factory pucks just right. The hitch was shipped rapidly by eTrailer.

The hitch is exactly what I was wanting... even though it is heavy, it was easy to assemble and adjust to the truck bed pucks. I will be trying it out in the next week when I hook up to the 5th wheel.

received product and it was scratched up from shipping but we will work with it. this is the first hitch we have purchased in many years and was glad to get it and not have to redo the inside of the truck bed. fits in to the slots and is ready to pull our newest camper on many adventures. Can't wait for it to warm up and get started.

This is a great product, easy to install . For those of you that have a extra fuel tank toolbox combo You need at least 6/1/2 to 7 inches from center of puck to tool tank for it to fit. My fuel tank toolbox combo is 20 inches deep or wide that is the most it can be. Included are a couple of pictures but not easy to see as i have a couple of tie straps around tank as well as a bolt down .Also when I have it in the slide back position. Trailer will just barely clear tail gate, but I can leave tail gate down with no problem, it would depend on your trailer.. etrailer is great to work with and have some great videos to help.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I haven't used the hitch yet, but it was easy to put together with the supplied instructions. It fit the factory pucks just right. The hitch was shipped rapidly by eTrailer.

This is a great product, easy to install . For those of you that have a extra fuel tank toolbox combo You need at least 6/1/2 to 7 inches from center of puck to tool tank for it to fit. My fuel tank toolbox combo is 20 inches deep or wide that is the most it can be. Included are a couple of pictures but not easy to see as i have a couple of tie straps around tank as well as a bolt down .Also when I have it in the slide back position. Trailer will just barely clear tail gate, but I can leave tail gate down with no problem, it would depend on your trailer.. etrailer is great to work with and have some great videos to help.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I haven't used the hitch yet, but it was easy to put together with the supplied instructions. It fit the factory pucks just right. The hitch was shipped rapidly by eTrailer.

This is a great product, easy to install . For those of you that have a extra fuel tank toolbox combo You need at least 6/1/2 to 7 inches from center of puck to tool tank for it to fit. My fuel tank toolbox combo is 20 inches deep or wide that is the most it can be. Included are a couple of pictures but not easy to see as i have a couple of tie straps around tank as well as a bolt down .Also when I have it in the slide back position. Trailer will just barely clear tail gate, but I can leave tail gate down with no problem, it would depend on your trailer.. etrailer is great to work with and have some great videos to help.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I haven't used the hitch yet, but it was easy to put together with the supplied instructions. It fit the factory pucks just right. The hitch was shipped rapidly by eTrailer.

The Hitch is Great! The shipping box was almost destroyed when I received it, this was the second hitch that I bought from etrailer and again the product was great but the shipping box was almost non-existing. Improve the shipping box.

Excellent service, I ordered my hitch Wednesday around noon, Monday at 3:30 it arrived at my door in good order and was put together and put in my truck very Quickly! I bought a Chevy 3500 with the new puck system for hitches and that is the reason I ordered the new Curt 20A 5th wheel hitch and it works great ! I have bought from etrailer several times and will order from them again if and when I need trailer products !

Easy install, fit perfectly. Very pleased!

Click to Enlarge

Met my needs

Hitch is smooth and solid great towing

I recently purchased a Reese M5 20K hitch for my new Silverado 3500HD, Crew Cab, 8’ bed. As usual, Etrailer pricing was very good and with free shipping to boot. The hitch arrived via UPS in just a few days after placing the order. Following the detailed instructions provided by Reese, the install into the factory “puck” system, was fairly straight forward. However, a word of caution concerning the install. There are 4 15/16” bolts that need to be torqued to 220-foot pounds and are somewhat difficult to get to. Fortunately, I was able to borrow a torque wrench that would accommodate the recommended foot pounds of torque. Also, you may have an issue if you need to place the hitch at its highest position. The release handle might protrude above the bed rails of your truck in this position. This will be a problem if you have a bed cover. Reese is/was well aware of this issue and sells an after-market handle that will correct this issue. Etrailer lists this handle on their Web page.

Click to Enlarge

We received the product couple days ago. Looked at it closer this morning. Everything appears to be intact. It is definitely heavier and more solid built than I had anticipated from the pictures shown. Ordered a new truck about four weeks ago. Hopefully it comes sooner than later with the Covid delays, so that we can try this bad boy out! Here is what I like about this hitch .... 30 K rating. Well in excess of the 21,000 pounds or so that I will be pulling. Added safety factor. The head separates from the body and legs, with one pin, which will make it easier to take in and out of the box. The fully articulating head and king pin clamp should make for a smooth operation without much noise. The legs came in a separate box. If the hitch ever goes in a different vehicle, I am thinking that legs should be able to be purchased to accommodate that set up and still use the rest of the hitch. The hitch actually has an appealing look to it. A lot or even most hitches are kind of ugly. I believe the hitch is completely, 100% USA made. I cannot give an opinion on actual use until such a time that our truck arrives. Some people said that the packaging was poor and the box basically disintegrated in transit. Ours, however, arrived in good shape. There was foam inside of the box for cushioning and a secondary box inside the main hitch box.

Fits perfectly for my truck, easy to install, releases and locks with out any issues.

I recently purchased a Reese M5 20K hitch for my new Silverado 3500HD, Crew Cab, 8’ bed. As usual, Etrailer pricing was very good and with free shipping to boot. The hitch arrived via UPS in just a few days after placing the order. Following the detailed instructions provided by Reese, the install into the factory “puck” system, was fairly straight forward. However, a word of caution concerning the install. There are 4 15/16” bolts that need to be torqued to 220-foot pounds and are somewhat difficult to get to. Fortunately, I was able to borrow a torque wrench that would accommodate the recommended foot pounds of torque. Also, you may have an issue if you need to place the hitch at its highest position. The release handle might protrude above the bed rails of your truck in this position. This will be a problem if you have a bed cover. Reese is/was well aware of this issue and sells an after-market handle that will correct this issue. Etrailer lists this handle on their Web page.

Click to Enlarge

Straight forward directions... picking up the new Fifth wheel this weekend can wait to see how this hitch operates and pulls the camper!

Very good experience. Fast shipping. Was missing part of directions, so I called customer service and it was emailed to me immediately. Video of installation was a big help also. Thanks

Works great, solid product, No Chucking while starting and stopping Towing a 14000lb 5th wheel trailer

There was a snafu on the delivery of this, like it ending up 1000 miles from my house on the first try, and then the delivery company getting mad at me for not having a forklift at my house. Since I just got this yesterday I can't say much ab out it yet, I am still trying to install it. I do suggest a hoist in your garage if you plan on removing this hitch at all, it is heavy. It looks to be in great condition though! I can't wait to get it attached so I can give it a test drive on a 2 hour trip. I can tell you that two RV retailers suggested this B&W hitches, so I have high hopes. With all the products on the market today, to get recommendations from two different companies that installs them, is impressive.

Service was great hitch was awesome great company to do business with

We will be using it soon. Installing was a great with the video to help.

The Hitch is Great! The shipping box was almost destroyed when I received it, this was the second hitch that I bought from etrailer and again the product was great but the shipping box was almost non-existing. Improve the shipping box.

I already had a curt goose neck frame mounted in truck so I used the Curt adopter plate # 16220 an the A 20 curt 5 wheel hitch assembly was very easy with no issues looking forward to putting it to work with my G M C 3500 also purchased a curt bumper dual ball adjustable hitch

Click to Enlarge

Click to Enlarge