Best 2018 Subaru Impreza Trailer Hitch Locks

Was trying to find the appropriate hitch lock for my Thule Cargo Box. It turns out that this lock meant for Thule Bike Racks also fits the Thule Cargo Box Hitch perfectly. We traveled for a month and never worried about our cargo box dropping off or being taken away. Works for more than just Thule bike racks, highly recommend!

This kit had exactly what we needed to be able to lock our Thule bike rack in place. It arrived timely and included all parts and instructions we needed.

Works well. Bolts through Hitch receiver so you can snug it down to avoid rattling. Locking cap just spins around unless unlocked, so about impossible to remove.

Click to Enlarge

I used this unit with the Swagman trail-head 4 bike rack mounted on a curt Class-1 hitch receiver (installed on a 09 Subaru Impreza). Installation took less than 5 mins and now I am relieved that no one will steel my bike rack :-)

I needed a lock for my Pro Series 4 bike trailer as it only has a cotter pin and I was taking it off my van every time I went to the trail for fear it would get stolen. Giving it four stars since I haven't given it a test use but it fits perfectly! I could not be more grateful to a previous reviewer for suggesting this solution.

Click to Enlarge

Click to Enlarge

I have used this locking pin a few times now and it works great. Fits my class 1 hitch receiver well.

Fast shipping. Quality of locking pin and cable feel great.

Click to Enlarge

Click to Enlarge

We are very thrilled with the bike rack. The ease or ordering online and the helpful staff added to the excellent review. Product was everything that it was advertised to be AND MORE. Hitch mounted easily; sturdy; accepts a wide variety of bikes...recumbent, Rans Cruz (crank forward) and standard diamond frame. Amazingly functional product. Thank you!

Click to Enlarge

It certainly works as it should ,,,thanks

Clearance around the Tesla Model Y hitch receiver is tight but this anti-rattle hitch lock fit perfectly, even after torquing it to spec. The lock mechanism on the left comes very close to the 7-pin connector but it doesn’t touch and the lock rotates freely around the pin. Product appears to be of high quality.

Click to Enlarge

Works exactly as described. Secures my Go Rhino bumper step, and keeps it from rattling. Only problem is I wish the bolt head was 3/4". Most socket sets don't go beyond 3/4", so you'll need a 7/8" box wrench or Cresent wrench to install/remove it.

Arrived quickly. Easy to install with the excellent video and instructions. I installed on my 2012 Forester with the Curt hitch I had previously purchased from etrailer. The locking hitch pin completely stopped my hitch rattle.

Click to Enlarge

Click to Enlarge

The hitch pin broke on the first trip with the SR2415 bike rack carrying 3 bikes. This rack is rated to carry 4 bikes and the hitch pin is compatible with this bike rack. As you can see in the photos, the color of the outer shell is different from the inner metal of the nut, which I perceive as the nut is not made of the same metal all throughout. Not sure why. The cable lock is NOT compatible with this rack and eTrailer should correct the answer registered on this site regarding this, which I had asked before purchasing this. Etrailer shipping was as always fast but unfortunately this product is seriously bad and is risky to use. Luckily my bike rack did not fall off the hitch and did not go flying on to other cars. I had to go to a local hardware store and buy a 3.5 inch length 1/2 nut and bolt, which worked just fine while returning.

Click to Enlarge

Click to Enlarge

Quick shipping. Perfect part! Thank you

Click to Enlarge

It installed easily and quickly. Good price and fast delivery. This is the 3rd product from etrailer and Curt for me.

Had it on my hitch for a month this spring and then could not get the lock to work and the key was stuck in. Tried oiling and the key finally broke off in my hand. After another couple of months I snapped off the bent end of the pin with a long pry bar. The pin was rusting! Very disappointing for a Master Lock product. Just got a $xx locking pin through you that looks tougher but it is very hard to use: have to push in on the key pretty hard, while keeping the round lock from turning, and holding in the pin against the pushing on the key. I added a small stainless hose clamp to the lock so that the lock can be held to stop the spinning and hold the thrust of the key. We trailered our old Ferrari to Florida this spring with the old pin to win our class at Amilia Island – 1946 to 1950 limited production European sports and GT cars. If you check we have a lot of trailer stuff that we got from you in the past and your service and stuff have been great.

These locks are perfect for securing the pins on my Demco 5th wheel sliding hitch. Ordered one mor 1/4” lock to secure the hitch plate.

Click to Enlarge

The product looks to be a good quality item. But it is hard to rate something that stops bad things from happening. It does provide that first important thing: deterrence.

Love working with trailer, especially Lori! The right part and it works as advertised. Easy to use, compact size.

Simple, easy, and secure. Kathy and I use all Yakima bike products and they’re just terrific. I received it today and it’s already on the car.

Very inexpensive, strong hitch lock! Will knock the competitors out of the park. I would highly recommend this for a strong pin to hold your hitch in. I have one locking in my hitch and another locking in my ball.

Click to Enlarge

This hitch lock works flawlessly! The gray cover over the lock keeps out dirt and corrosion even in Maine winters where road salt is notorious for causing rust and corrosion. Tip: Occasionally squirt a little WD-40 into the lock cylinder and using the gray cover keeps it working like new!

The hitch lock spans my new 2.5 inch receiver with about 1/4 inch to spare and is now lockable. The original hitch tite pin is the same length but the lock on this item locks from the side and makes better use of the pin.

Click to Enlarge

Thanks for keeping me posted on my order, Korren. It arrived when promised.

Very sturdy lock that fits my bike rack. I didn’t hook the bike rack up to the trailer hitch but the photo shows that it fits. There is other locks on the market but I highly recommend this lock!

Click to Enlarge

I'm happy with the product but have one observation. The length of the hitch pin is about 3/16 inch too short to use with the included washers. I can only get it to lock correctly with no washers. Thanks

Great locks for the hitch and coupler, made to last.

I like it, the 90deg bolt works perfect for me. The hitch is recessed into the bumper on these GMC Yukon's, trying to reach in long-ways and (blind) with a key is not easy, having the key hole face out towards you makes install/uninstall of the draw bar much easier.

Was searching for a.lock for the hitch bolt for my Prorack bike rack and found a very helpful post on etrailer.com. I did check around and found the prices were excellent, the lock fit perfectly and the shipping speed and packing were great.

I love this Yakima Kingpin 4 bike rack. It arrived on time and is very stable. My bike had minimal movement through view of my rearview mirror. I even went 70 mph on the freeway. No problem for this rack! It took only about 20 minutes to put together and install onto my hitch. What a great buy! I was lucky to get the free shipping too. You guys helped me pick out this rack due to the grest videos you guys have on youtube. Thanks etrailer.com!

Click to Enlarge

Click to Enlarge

About 6 months after owning it, the lock is completely froze up. Can't cut the darn thing off without cutting my safety chain hook up off either

Would’ve been a great little lock had it actually fit in the housing. Too short for mine. Turns out my housing is 3”, not 2”. My bad. Paid $25 for it, etrailer wants $17 for return shipping fee? Pretty lame. So buyer beware, measure your housing first!

Click to Enlarge

Emily, was great to deal with. She took an interested in my need , did some research and solved my problem. Great job!!

Works perfectly on my old sportworks rack. Thank to the other reviewer for mentioning it worked on his. There was a gap between the lock and the hitch. I bought ten fender washers to fill the gap. For the price, it was an excellent purchase from eTrailer.

Click to Enlarge

This hitch will be used with my new Kuat bike trailer.

This does not fit a 2006 ford explorer. The 7pin plug is too close to the reciever. The pin goes through but the lock will not go on the pin. The pin will not go in the other way. O have these on my 2006 f250 and they work great so far!

used to lock 5th wheel plate to 5th wheel hitch body. Worked just as I wanted. Good product, keyed alike, fair price. Thank you.

Click to Enlarge

Well built and designed trailer hitch, fits great with my GMC. Recommended this unit to all who have a multi-pro tailgate on their truck.

This hitch lock was exactly what I was looking for. I didn’t want one too long with a lot of back and forth play in it. So it was a perfect fit. Holding up very well. Would buy again….