Best 2016 Ram 3500 Tow Bars

No problems, tow a 3500 4x4 Chevy with it.

Easy to find and order online. Fast shipping too!

One piston got bent, but blue ox inspected and sent me a new piston it cost me but I was very pleased.

You guys where great product broke a few months after purchase tried contacting manufacturer but never heard back from them very poor customer service on their end thank you

Any time I order parts they are always in stock and shipped right away. From the reviews this Blue Ox was my best option. Shipping is always next day or sooner. Love this service.

So easy a caveman can do it. Great material quality, etrailer was fast on shipping, and hd support ready if needed. I consider myself an intermediate mechanic sk I had no problems doing this by myself. Instructions were good, I modified to make some install details easier and emergency link better.

There is not a lot of information on the internet about pulling this kind of VW. I did my homework and this works GREAT when pulling a standard transmission with key left in "ON" position. etrailer has a lot of variety to offer for different needs. This is the lower priced, plain Jane, no frills, less moving parts for something to go wrong - exactly what I was looking for tow bar. With little work it folds up for storage easily. Installation on our '98 diesel VW was clean and easy without incident (I do all my own modifications when needed. There is no rattling loose fit in tight corners or straight a ways. We don't even know we are pulling anything behind our '68 Dodge Travco B210 (modified with 5.9 Cummins)

Works great on our Mini Cooper S Connects with removeable pins, making connections to the RV quick and easy.

Great product! Works great and support to pick the right tow pbar from George at etrailer was excellent too!

Towed my Ram 2500 loaded with a RZR on a bed rack for thousands of miles. Zero issues

I spent five months flat towing my Silverado using this tow bar. I estimate I towed 4,000 miles with it and hooked up and disconnected around 20 times. It has held up very well with no rust or finish issues, which is notable as most of the time my spots were either right on the ocean (within 20 feet of the saltwater) or close to the water. I did rinse frequently and kept the Roadmaster cover on when not in use. Hook ups and disconnects are quick and easy, I suggest using gloves as one time when I raised it up to 90 degrees to snap in to the retainer after unhooking one of the bars was still extended and slid down and pinched my finger pretty good. (This was simply my stupidity, not the fault of the design, but gloves would have helped:) The LED lights on the sides also help make the rig more visible from the side. In my opinion this is the highest quality tow bar currently on the market. eTrailer also did an outstanding job on the entire flat tow installation.

We traveled 7,200 miles last winter pulling your 2023 2 door Jeep Wrangler and it performed Excellent. I did buy the optional cover which I think this is a wise investment to protect it when parked.

We've been towing our Jeep Grand Cherokee for about 8 months now with this tow bar and it's worked flawlessly! We've been places where the coach and Jeep are not perfectly aligned putting the attaching pins in a bind, but with a simple release of the handle it would release the arm and unbind the pin. Super easy to use. I highly recommend the Nighthawk All Terrain, Non-Binding tow bar. OH! The LED lights along the arm make it look great too!!

Quick delivery and the tow bar was well packed and configured for my Blue Ox base plate. Thanks

The tow bar that I purchased has so far been great. I own a concrete mixer truck and I work it in different towns all over the country and in order to bring the Mixer truck and the pick up truck it requires my blue ox tow bar. In 2017 I towed my 2013 ram 2500 behind my 1998 peterbilt Mixer truck from Los Angeles to Las Vegas then from Las Vegas to durango co. Then to Blythe ca. Where my current job is. So it's done me well all year

Responsive Customer Service, thanks.

This towbar has been very disappointing. When it was time for a new towbar, I decided to downgrade from the Sterling to this Falcon, and that was a big mistake. This towbar cannot be described as "non-binding". Unless your tow vehicle is perfectly aligned with the motorhome and level, there is no chance of releasing the latches - they bind and will not release. If I get stuck in a stopped position where the car is misaligned from the coach by more than about 10 degrees, or higher or lower than the hitch by more than a few inches, I have a major project to release the towbar from the car, even sometimes having to use a punch and hammer to forcibly remove the hitch pins. Further, after just a few months of use, one of the release mechanisms quit working altogether, so I my partner has to start the car and jiggle back and forth in order to find a spot where I can remove the hitch pins. Once the towbar is unhooked, I have to use a screwdriver to dig around under the failed release lever in order to push the cam in manually so I can push the outer arm back in. The guides along the arms for the cables are not useful and dangerous. I initially used straight power and safety cables running through the guides, and they go chewed up in a short period of time. I had to buy new coiled cables that do not run through the guides, and have had no further problem. As a towbar, this device works fine. But it is NOT non-binding, and I highly recommend upgrading to one of the higher-end towbars. This device is too problematic to recommend, and I would never buy it again.

It took me awhile to decide if this would work with the Rough Country bumper I wanted to put on my 2010 Jeep Wrangler. After looking at numerous photos of the bumper I decided to pull the trigger and it worked. The mount cleared the bumper and I’m very pleased with how easy it was to mount and use the tow bar. I did everything myself except wiring the plug on my Jeep.

The adjustable arms make this tow bar simple to hook up and disconnect. I can pull up behind our RV and hook up in about 3 minuets (including the wiring for our break buddy and putting the transfer in neutral). Disconnecting and stowing the bar is even faster. Although is tow bar is locked to the baseplate and folds flat it is so easy to remove I end up taking it off and putting it in the back when we will not be towing.

I was slightly nervous that this would be difficult to take on and off if I wasn't on flat ground. So for I have not had any issues and I really like that it hooks up to a 2 inch ball. My jeep has a lift on it and getting things level was easy with and adjustable height mount.

Excellent product. Towing 4 door Jeep Wrangler Sport.

I have towed our Honda Accord Sport over 7000 miles now with this tow bar and have been very happy with it. I didn't spend the extra $'s to upgrade to a non-binding bar and while I have had a couple of problems in getting the bars to release it was infrequent. I would suggest you read the owners literature and be sure to clean and lubricate the towbar regularly. It makes a difference

While the quality of this units seems excellent, and it is a good price, I was unable to use it in my setup. I Bought it to go with the Blue Ox base plate for a 2014 Chevy Spark. That base plate sets the tow bar connections 23" above the ground. This tow bar requires a 7" rise from the base plate connection to the hitch. Meaning 30" above the ground at the hitch. In my rig, this would require a hitch riser of over 12". I have no complaints about the tow bar, however, it is not a good option with the 2014 Spark Blue Ox base plate.

Towed a 4 door Rubicon with Dodge 2500 truck. The tow bar did great on the 2000+ mile trip. The bar is very easy to couple and uncouple.

1st tow bar I had to send back, due to chip powder coating. 2nd two bar came a week later Great job etrailer. It was easy to do a return and get a replacement. etrailers whole team was great getting me what I wanted. I replaced a 10-year-old tow bar and wanted to replace it with their new XHD you can tell its LBS is higher than my old tow bar.

The tow bar looks good. However, it was missing the large bolts to hold the blue ox adapters onto the tow bar. The hardware kit was not complete. Also, the instructions on attaching the blue ox adapters were NOT CLEAR at all. I think the bar will be very good once I get the missing parts shipped to me.

Worked perfectly on a 3500 mile cross country trip.

Arrived quickly and well packaged. Took less than an hour to install on the RV with the included safety cables and wiring.I haven't pulled our Bronco with it yet but the tow bar appears to be well built and a quality product.

etrailer has been just what I need it as a first time tower of a Rv tow car there experience and courtesy of helping someone with no experience has been a huge relief with something so important there help was invaluable all the way through Thank you so much

Very easy to use and handled as well as I expected.

box package was great arrives in three days ups

Couldn’t believe etrailer sent this 2nd day deliver for free but they did. Only reason I didn’t give it five stars is whoever pounded the two Hex nut, top lock flange, 1/2”-13, grade 5 nuts to make them into lock nuts pounded them to hard makin them impossible to tighten even half way, even with impact wrench. Barely got one back off and had to cut the other off. Replaced with a couple of nylocks, washers and blue locktite and all is good now. Not faulting etrailer any at all. This was on Curt. etrailer is excellent. Second time I’ve purchased from them and I’m sure it won’t be the last. Great people to do business with.

First, this bar is extremely heavy, which makes transporting and maneuvering cumbersome and difficult. Secondly, I had issues with this unit from the get-go. I did not receive the correct bolts to attach the Roadmaster clevis to the arm ends. The instructions clearly state that a clevis bolt was to be installed with the XHD unit, but it was not in the hardware bag. I had to call customer service (which was so/so, almost like the person didn't believe me) and had the bolts sent to me. I received the bolts but long story short, they were too short. They did not come out of the bottom of the locknut and any attempt to torque them to the point they did protrude, caused the forks of the clevis to bend, which is too much stress on such an important piece. I did not feel it was safe to either have the bolts not protrude, or force them to protrude. Then came the days-long process of trying to rectify the situation. I called customer service and attempted to explain the problem to the rep. She didn't really want to hear my problem and I was quickly rushed off the phone and directed to call Roadmaster for support, which I did. Roadmaster, of course, has nothing to do with this bar, or problem (pictures were sent to RM) and I was directed to call eTrailer back. I spoke to another person and she was a little more helpful. However, during our "conversation," I could hardly get a word in (I was spoken over and interrupted constantly.) I was told that #1.) the first person I talked to had no idea what she was talking about #2.) Demco manufactures these parts, not Roadmaster, #3.) Essentially the correct length bolts don't exist in the parts catalog. At this point I am starting to get upset with my experience and just wanted a tow bar that worked. I was convinced to but a Roadmaster branded tow bar to avoid any more issues (Blackhawk All Terrain) which I found to be strange, I figured the margin on the eTrailer branded products would be higher, but I digress. Since there is no exchange program with eTrailer, I had to purchase the Blackhawk outright. I was given a UPS label to send the XHD back, but I had to wait to receive the Blackhawk to reuse the box, which is not a huge deal, a minor inconvenience at this point. As of today (4/26/24) I am still waiting for a refund on this unit which I was assured it would be on it's way once the tracking number showed that it was picked up by UPS, but this is not the case. In conclusion, the XHD seemed like it would be a decent product if they can get the hardware right (at least for the Roadmaster system) it's just heavier than most tow bars I have had experience with. eTrailer.com customer service can also use some work, I was not happy with the service after the sale I received. Oh, and the final kick in the tail, the Blackhawk does not come with safety cables. If this were my company, I would have thrown those in for the inconvenience, but I was offered nothing for the trouble this has caused, no discount on the Blackhawk, cables or anything. I will do all I can to avoid buying from etrailer again and will direct others to the same.

It’s well put together and easy to install .

Everything arrived timely and well packed. Upon opening, all contents were there and in great shape.Extremely good service! I would order again from etrailer!

Great price, great product. Wish Demco would put a locking hitch pin with their product. Pay the company that much money and you get a standard pin. I think Demco should send a locking hitch pin standard with all of their tow bars and a normal hitch pin with the cotter pin clip optional. Or, just include both, but definitely a locking pin standard with all tow bars.

Demco has made MANY improvements over the original Excalibar I purchased 18 years ago. Some of the changes have been with the safety cables being better organized; the main 'towing' bolt being perpendicular to the towing pull tension; being able to adjust the assembly to accommodate a more level alignment between the powered and towed vehicles by 'flipping' or turning over the yoke. Also, it is much easier to store the assembly with the newer pin and plate arrangement, instead of the previous pin system which required getting on the ground and attempting to pin the shaft to secure the tow arms. In addition, the tow arms now have the ability to hold themselves up while you are in the process of disconnecting the tow bar from the powered vehicle. I have not towed my truck behind my motorhome as of yet, so I can't say how it will disengage and be non-binding on the arms for storage. One of the issues I had with the old Excalibar was being somewhat difficult to release and disengage after a trip. Hopefully, that issue has been resolved.

The his is my second one, the first is still fine but after 100,000 miles towing behind three different motorhomes I figured it was time. I towed a GMC 4x4 diesel with a truck camper that weighs about 10,000 pounds and the a Jeep and no a Bronco 4 door.

On the road in our RV when I discovered our 3yr 7mo Blue Ox Tow Bar had a failure that I was not going to be able to use again. I call Willian S at etrailer about getting a new Blue Ox Tow Bar and having it shipped to a nearby UPS store. William checked to ensure it would be delivered before our scheduled departure. Not only did he assure me it would meet the timeline but he checked it after shipping to make sure it got here. Also he checked about a “like new” tow bar which saved me ~$500. Thanks for keeping me on the road without delay!