Best 2016 GMC Sierra 2500 Trailer Jacks

Attached is a picture of how I am using the unit. I have a two wheel trailer type sprayer manufactured by Rears Corp in Oregon. They supply a Bulldog 158151 with the sprayer to support the tongue when the sprayer is disconnected from the tractor three point hitch To reconnect to the tractor it is easier to have a unit with a wheel which is why I ordered the BD1541150301 and BDCP555. It did take me over two months to get delivery, but the unit works fine. You may want to contact Rears Corp and see if they would like to switch to the unit with the wheel. The only down side is that the 158151 supports 2000 lbs and the BDCP555 oly 1500 lbs.

I as surprised by the quality of build of this jack. The picture doesn’t capture the impression that this thing is a hunk!

Works great even better than original. Wished I replaced it years ago ago!

7000 lb trailer jack with grease fitting is smoother than I expected. Great Value. Easy on line order and great shipping. Thanks for the attention to my order

Pretty sure this is the model that came with my new BoatMaster Trailer many years ago. Anyway, much better than the last jack stand which started rusting less than a year. The new Bulldog, at least on my A-frame trailer, could only be installed with the handle facing forward, which is fine, especially since it is much easier at lifting its weight compared to a top-wind, rusty 1,000 jack that it replaces. I'll let you know if it lasts and doesn't start rusting prematurely or develops winding/gear problems.

i replaced my old jack with this one and it is harder to crank then my older one. probley putting the old one back on.

Easy to attach and allows moving the trailer with ease. I did use shorter bolts than came with the jack.

Great replacement for my boat trailer.

This device is fairly heavy-duty, sturdy, and the swivel works easily and smoothly from horizontal to vertical and latches/unlatches easily. It adds flexibility to the trailer's built-in screw-up/down jack with a flat plate on its bottom. It allows me to move the trailer easier without having to lift up the front end. The customer service was great: a customer service rep got involved and expedited the order processing so it arrived a lot earlier that I expected from the website,. That's excellent customer service. Thanks!

Problem was that regular Cargo trailer front Jack had to be removed every time I hooked it up behind Camper because of zero turning clearance to rear bumper. Swing Jack installed closer inboard of hitch on Trailer frame and folded after hook up provides unlimited turning clearance. Added value was the ability to move trailer since Jack has large diameter wheel. Special brackets allowed for easy installation. (no drilling/tapping of holes)

Great! Bought a 7000lbs capacity trailer that did not come with a jack, the info on this website makes it easy to find one to match your needs, and do it quickly. Very satisfied with this transaction, will use again!

These were a great addition to my trailer, easy installation (welding required) and supports the weight while loading a vehicle onto my so it is not all on the coupler and ball. I put 1 on each side on the rear of my trailer.

I purchased this JA-5000S-B Sidewind jack for my 20' Car Hauler because I added a Harbor Freight toolbox that was taller than my top wind jack. This one is somewhat taller than the one replaced and moves the wind handle toward the truck. In my case the tailgate still drops and clears the handle by 10" or so. The jack is a little slower than the last one but has a higher weight rating (5000 lbs) etrailer always helps with the selection and has been a great resource.

Fits perfectly. Took 5 minutes to install.

It works great. I am using it as a belt tensioner on our 1898 30 foot Pelton wheel at the North Star Museum. Probably not a use the manufacturer intended.

Im starting to wonder about shipping

This trailer Jack worked great on our Deckover Trailer It is just like OEM but at a more reasonable price! Highly recommend this trailer Jack

Shipping box had some but the jack was fine. Heavy item and not very much packing to prevent it from rolling inside the box.

E-Trailer helped us immensely when we had to replace one of our trailer jacks. Customer service was very helpful in choosing correct jack. Our trailer takes two jacks and I would have only replaced the broken one, However they explained the lifting ratio would be different between my old jack and a new one. Saved me from a breakdown later on down the road. Very good company to work with, returned all my calls.

I do repair work and put this jack on a farm trailer. the owner loves it. Doesn't sway or twist under load.

Perfect replacement for my jet ski trailer. Easy installation and fast shipping from etrailer. Thanks!

Easy install to provide greatly improved unhitched trailer handling. This item was the final component to complete a refurbished trailer for my catamaran. My project started with a 1987 Calkins single-axle used trailer, adding the following E Trailer parts: 1. Miro-Flex Trailer Stop/Turn/Tail Light unit 2. CE Smith V-Wing Bolster Brackets 3. Rectangular Trailer Reflectors, Adhesive Mount - Amber 4. Erickson Hide-A-Hook Truck or Trailer Anchors 5. Pro Series Snap-Ring Swivel Marine Jack and completed with a hand-built frame assembly and covered bunk boards.

I have an older trailer, a big Tex I think, 305v, and its Jack was very rusty and a wasp nest was active in the pipe. Not to mention the pipe was bent and wouldn't allow a caster, which was when I found the wasp nest! I found etrailer.com after a few goggle searches. They had the best price and earliest delivery date I could find. It arrived, all shiny and new, I was able to install it myself with just 3 bolts. Now my caster fits, the jack works, love is grand.

The item I received was exactly what was described and in appearance from the website. I did notice a round hole in the cardboard box that matches the diameter of the crank handle but upon inspection no damage appears to have taken place. I am currently sanding and then repainting my trailer frame and once that's completed I will mount my new jack which I anticipate will work nicely.

The Fulton trailer jack has held up very well. No signs of rust and the crank works perfect.

This product has proven durable and easy to use. Installation with simple and straight forward. If you're looking for a robustly built, long lasting Jack for your boat this would be THE product you're looking for. We previously purchased other jacks that did not last, became hard to crank, and ultimately failed. I'm glad I purchased this.

Good product and fast service

Good price, exactly what I needed. Order fulfillment times can't be beat.

Item as described, Easy to install. I wanted a shorter length jack so I could open my tailgate with the trailer attached without hitting the jack. With this being 5k capacity and able to rotate out of the way it fit the bill.i don't leave the trailer loaded so I'm pretty confident this will last a long time.

I love the Bulldog Round, Snap-Ring Swivel Jack - Topwind - 10" Lift - 5,000 lbs

Great product easy to install

This is very good system for our use. Would have given 5 stars but the ratchet strap was missing. No big deal as I have many. It’s just the point.

Working good so far.

Item arrived in short order. Reasonable price for a heavy duty tongue jack.

Great product would recommend

flimsy mount flange bracket. I had the pad too low in the dirt as I drove slowly and it bent the whole jack

This is a perfect replacement for my damaged A-frame jack.

We needed a weld on solution for this trailer. As always etrailer folks are willing and ready to help when needed. It’s been a year and we use this trailer for camping and general hauling. If you want a weld on solution for a jack this is it! Highly recommended. Fast shipping.

I wanted a specific Bulldog jack and of course ETrailer had it in stock. Bulldog makes a great product and I like the weld on, swing away option.