bing tracking image
  1. Trailer Jack
  2. Bulldog
  3. Car Hauler
  4. Enclosed Trailer
  5. Utility Trailer
  6. 1001 - 2000 lbs
Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 10" Lift - 2,000 lbs
Bulldog

Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 10" Lift - 2,000 lbs

Part Number: BD1541150301
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$98.94
Trailer Jack
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
5/8" Diameter pin is included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 7-3/4" retracted height and measures 9" from mounting bracket to top. Weld-on mount is sold separately. Great Prices for the best trailer jack from Bulldog. Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 10" Lift - 2,000 lbs part number BD1541150301 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (92)
  • Q & A (0)
  • Photos

Bulldog Trailer Jack - BD1541150301

  • Car Hauler
  • Enclosed Trailer
  • Utility Trailer
  • 1001 - 2000 lbs
  • Sidewind Jack
  • Swivel Jack
  • Leveling Jacks
  • Tongue Jacks
  • Pipe Mount
  • Weld-On
  • 10 Inch Lift
  • No Wheel or Foot
  • Bulldog
  • Steel

5/8" Diameter pin is included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 7-3/4" retracted height and measures 9" from mounting bracket to top. Weld-on mount is sold separately.


Features:

  • Dependable jack is recognized as industry standard for agricultural and commercial applications
    • ASABE compliant
  • Tubular swivel design lets you swing jack up for travel, down for use
    • Included pull pin holds jack in place
  • Precision-fitted parts provide exceptional stability and reliability
  • Sidewind handle has smooth, ergonomic design for easy cranking
  • Inner tube is zinc plated
  • Weld-on pipe mount (BD015279) and footplate are sold separately


Specs:

  • Bracket height:
    • 7-3/4" Retracted
    • 17-3/4" Extended
  • Lift: 10"
  • Clearance: 9" from mounting bracket to top of jack
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Handle radius: 5-3/4"
  • Pull pin diameter: 5/8"
  • Lift capacity: 2,000 lbs
  • Limited 5-year warranty


1541150301 Bulldog Round Tubular Swivel Jack, Sidewind, 10" Travel, 2,000 lbs

Installation Details BD1541150301 Installation instructions


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 10" Lift - 2,000 lbs - BD1541150301

Average Customer Rating:  4.9 out of 5 stars   (92 Customer Reviews)

5/8" Diameter pin is included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 7-3/4" retracted height and measures 9" from mounting bracket to top. Weld-on mount is sold separately.

by:

Attached is a picture of how I am using the unit.

I have a two wheel trailer type sprayer manufactured by Rears Corp in Oregon. They supply a Bulldog 158151 with the sprayer to support the tongue when the sprayer is disconnected from the tractor three point hitch

To reconnect to the tractor it is easier to have a unit with a wheel which is why I ordered the BD1541150301 and BDCP555. It did take me over two months to get delivery, but the unit works fine.

You may want to contact Rears Corp and see if they would like to switch to the unit with the wheel. The only down side is that the 158151 supports 2000 lbs and the BDCP555 oly 1500 lbs.



by:

Good quality jack that I installed on my trailer after the A frame jack was destroyed while towing my ATV during an elk hunt in the Gila. Excellent customer service and quick shipping.



by:

Jack fit my receiver very well. The pin was a little big for my receiving mount but that can be remedied. The wheel has a loose fit to the hitch but works quite well.
Overall it’s a pretty decent fit and will surely help at the campsites. Thanks!!



by:

Can't go wrong with Bulldog - needed shorter tongue jack to enable parking on my slopped drive way - this was the charm.........



by:

Awesome delivery great product thans



by:

I used this jack for a very tiny teardrop I was building to pull behind my car. I chose it because this was the lowest stand I could find to crank down to the low hitch on the car. It's a great quality hitch and very versatile combined with the weld on pipe mount.

There are a few draw backs to consider but only for similar applications. It's a much heavier stand than I need for a lightweight trailer. To save weight I didn't add a foot but this allows the telescoping lift peice to spin in the outer housing rather than crank up until it contacts the ground. Not a big deal I just touch with my toe until it hits ground. Also w/o a foot it sinks in soft ground.

Summmery... Great quality. Great if you need to crank low and compact. A bit too heavy duty for a really lightweight trailer.



by:

High quality lift - works well.



by:

Bulldog Jack-BD1541150301 -Product received as expected
Weld on jack pipe mount-BD015279 -Product received as expected
6" heavy duty caster - BDCP555 -Very disappointed w/ product received. The "6 caster on your website is shown w/ pin to attach to jack. The caster I received did not have the pin shown.Very disappointed.



by:

I installed the trailer jack as soon as I received it and it has been working great for a year. I installed it on a 3,000 gallon water trailer.



by:

I bought this as a Christmas present for my husband. He is building a trailer for us to take on camping trips. He had mentioned that he was looking at this item for his project. I received it within a few days of placing the order (which is great since I am a notorious last minute shopper). Admittedly, I did not look at the item when it arrived, I just wrapped it up and put it under the tree. However, when my husband unwrapped it, even I was impressed. He's even more excited to get going on completing the trailer now. Perhaps I'll review again once it is complete... until then.. great job so far!



by:

You are super fast!!!! Thank you!



by:

Received the jack ahead of my expectations. It was properly packaged and in excellent condition. The jack was an exact mounting match that I required and has a very smooth and easy crank. Overall it appears very sturdy and should last for very long time.



by:

I ordered the swivel jack and the 6- inch caster wheel to replace the skid plate on our trailer. The order was received in a timely fashion
and the company kept me informed with email updates.
I recommend this company to anyone needing help with their trailer.



by:

EXACTLY as advertised ! As a repeat customer, I am still EXTREMY satisfied with e-trailer, from ease of ordering, to fair prices, to very fast shipping, and to excellent customer service and the videos are extremely helpful. It is so nice to go to a company such as yours that really goes "above and beyond". I will defiantly remain a repeat customer. Please keep it up as company's such as yours with all these qualities are to few and far between. Thank you so much.



by:

This product exactly fit my needs and is a well built jack. I've also always had great service from etrailer and will buy from this company again as the need arises.



by:

The product works perfectly with my teardrop trailer. It's adjustable in length so I can level my trailer when I park it. To remove the hitch from my car I can raise it up and let it slide off my vehicle. I have a wheel on the mount so I can just roll it away from my car. I am 100 lbs and can do this myself.



by:

Great jack and the swivel piece looks to be heavier duty cast metal vs tube metal on my old bulldog.



by:

All good!



by:

Product is excellent - works as intende d.



by:

Fits in the storage box when not in use



by:

If it can hold up in the tree service business it can hold up any where!!



by:

Thanks Paula for the excellence service and knowledge to find the part I needed in a quick and efficient manner. I received it faster than I expected and did not lose any business. Thanks again, Howard Moses



by:

It works great!



by:

Nice and sturdy jack installed easily, I highly recommend it.



by:

Works well


25
92
Show More Reviews

See what our Experts say about this Bulldog Trailer Jack

  • Bolt-On Mounting Plate For A Bulldog Round, Pipe-Mount Swivel Jack # BD1541150301
    Hi Rick, What you're referring to is a snap ring swivel plate which would require the appropriate mounting plate being welded to the jack. Instead you can use the etrailer Bolt-On Swivel Mounting Plate # e52JR to attach the Bulldog Round, Pipe-Mount Swivel Jack # BD1541150301 to your trailer frame. This plate will require you to drill two holes in to the trailer frame in order to install.
    view full answer...
  • Recommended Trailer Jack With Mounting Point Under 2-3/4" Wide
    Since you have only 2-3/4" between the coupler of your trailer and a steel beam I recommend the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 10" Lift - 2,000 lbs # BD1541150301 which will only take up about 2-1/2" of space on the frame to mount. This jack has a 2000lb weight capacity and will be plenty since you mentioned it will only need to support around 200lbs. You will need the Bulldog 2-1/4" Long, Weld-On Jack Pipe Mount for 2-1/2" Female Mount and 5/8" Pin # BD015279 welded...
    view full answer...
  • Dimensions Of Bulldog Sidewind Swivel Jack And Bulldog Caster
    The Sidewind Swivel Bulldog Jack, part # BD1541150301, you referenced measures 16-3/4 inches from the top of the jack to the bottom of the tube when retracted. From the top of the jack to the center of the mounting tube the distance is 9 inches. From the center of the mounting tube to the ground when fully retracted is 7-3/4 inches and when extended it has an additional 10 inches, bringing that number to 17-3/4 inches. The handle radius is 5-3/4 inches. I have attached a product review...
    view full answer...
  • Replacement Jack For Fulton Magnum Series Pipe Mount Sidewind Jack
    I recommend the Bulldog Round, Pipe-Mount Swivel Jack # BD1541150301 to replace the Fulton jack currently on your trailer. The Bulldog jack uses the same Pipe Mount connection so that you can easily replace your jack. The jack is rated for 2,000lbs and has 10" lift height. Since you have a wheel you will also need the Replacement 6" Caster Wheel # BD500245 to attach to the jack. The caster is rated for only 1,200lbs so you will need to ensure that you do not exceed that with the caster...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Pipe Mounted Bulldog Jack Compatible With Caster
    I have a replacement jack option for you, but I do not recommend cutting off the footplate and drilling a hole in the tube to mount a caster like the Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs Item # JC-102 to your Bulldog 158151 as it would void any warranty on the jack. Instead I recommend replacing it with the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 10" Lift - 2,000 lbs # BD1541150301 which will fit the same mount as current jack and is already...
    view full answer...
    Image 1 for
  • Trailer Pipe Mounted Swivel Jack with Retracted Length Measurements
    The Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 2,000 lbs # PS1401060303 has an overall length when retracted of 16-5/8 inches. This jack does not have a wheel. For a similar jack with a wheel, I recommend the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 10" Lift - 2,000 lbs # BD1541150301 along with theReplacement 6" Caster Wheel for Bulldog Trailer Jack with 2" Tube Diameter - Qty 1 # BD500245. Without the wheel, the retracted length of this...
    view full answer...
    Image 1 for Image 2 for
  • Extended and Retracted Length of 2k BullDog Swivel Trailer Jack and Does the Inner Tube Spin
    I went out to the warehouse and pulled the Bulldog Swivel Trailer Jack # BD1541150301. When fully retracted it measure 7-3/4 inches from the bottom of the inner tube to the center of the mounting bracket. When fully retracted it measures approximately 18 inches. The inner tube does spin so you can use wheel # BD500245. If you are turning the handle and the wheel is spinning the jack will not go up or down so you will have to prevent the wheel from spinning in those scenarios.
    view full answer...
  • Weight Capacity of Trailer Jack Caster Wheels for Bulldog Jack
    Bulldog Side-Mount trailer jack # BD198250 comes with a foot plate as standard. Bulldog jacks like # BD1541150301 are also available without a foot to allow you to select one like # BD018564 or to use a wheel like # BD500245. Please do note that a jack wheel will have a lower weight rating than a standard foot plate. If you were to use the side-mount jack # BD1541150301 with caster wheel # BD500245 the jack weight rating would then be limited by the 1200-lb rating of the wheel assembly. The...
    view full answer...
  • How to Get a Round, Weld-On Swivel Jack with a Removable Footplate
    I have a solution for you. While we do not have a pre-built weld-on swivel jack with a removable footplate, this can be assembled together with the following pieces: 1) Bulldog Round, Pipe-Mount Swivel Jack, part # BD1541150301. It's a swivel jack with a 10" lift and 2000-lb capacity. 2) Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks, part # PS1400700340. It's a foot plate for 2000 - 5000-lb jacks. 3) Bulldog 2-1/4" Long, Weld-On Jack Pipe Mount for 2-1/2" Female Mount...
    view full answer...
  • Replacement Gear Kit Recommendation for 2k Bulldog Sidewind Jack
    Yes, but the gears also come with the handle. For that you would want the part # BD500256. This would be the correct parts for the Jack part # BD1541150301.
    view full answer...
  • How To Attach Bulldog Trailer Jack # BD1541150301 To Trailer
    The item you selected, Bulldog Jack, Sidewind Swivel - 2,000 lbs, part # BD1541150301, requires the use of a pipe mount to be welded to the frame of your trailer. I contacted our representative at Bulldog, and he informed me that to mount part # BD1541150301, you will need the Weld-On Jack Pipe Mount, part # BD015279, which will need to be welded to your trailer frame. I would recommend having a trailer professional weld part # BD015279 on your trailer so that you can install the Bulldog...
    view full answer...
  • Availability of Side-Pipe-Mount Caster Wheel Sidewind Trailer Jack
    We do not have an existing jack that meets all of your criteria: side-frame mount, 2000-lb minimum rating, caster wheel, 15-inch lift, side-wind operation and pipe mount. The reason is that a caster wheel on a jack will rarely be rated as high as 2000-lbs. Most caster wheels top out at 1500-lbs or less, such as the 1200-lb-rated # PS1400750340, which fits a 2-1/4-inch jack tube like that on Bulldog Jack # BD1541150301. The thing is this jack has only a 10-inch lift. Other than that this...
    view full answer...
  • Trailer Jack Recommendation for Kendon Motorcycle Trailer with Round Tongue
    There is no bolt-on jack made for a round tube trailer frame since this would make securing the jack rather difficult; it would want to rotate around the frame tube whenever it was under load. You will need to have some steel material welded to your frame to allow jack installation. You can use a pipe-mount type like Pipe Mount Swivel Jack # DL22685 which includes the weld-on pipe section.
    view full answer...
  • Will The Replacement 6" Caster Wheel # BD500245 Fit Bulldog Jack # BD1541150301
    Hey Brad, The 6" Caster Wheel # BD500245 would be a fit since it fits 2" jack tubes and the Bulldog Round, Pipe-Mount Swivel Jack # BD1541150301 has a 2" inner tube with a hole for the pin for the wheel to lock into. Using the wheel instead of a metal footplate will drop the capacity down to 1,200lbs for the jack. These replacement wheels are all made of plastic which causes the capacity drop.
    view full answer...
  • How does the Bulldog Jack # BD1541150301 Swivel
    The Bulldog Jack, # BD1541150301, swivels on a metal tube, # BD015279, that will need to be welded to your trailer frame. I made a short video showing how this jack swivels for you.
    view full answer...
  • What is the Extended Length of the Inner Jack Tube of the Bulldog Jack BD1541150301
    I went out into our warehouse and measured a Bulldog Jack, Sidewind Swivel, part # BD1541150301, and found that when the jack is fully extended the amount of the inner tube that is exposed is 11 inches. The overall length when the jack is fully extended is 27-13/16 inches. The inner tube diameter is 2 inches. If you wanted a wheel for the bottom of this jack I would recommend a replacement 6 inch caster, part # BD500245. You should note that this would reduce the overall capacity from...
    view full answer...
  • Can The Foot Plate On The Round, Pipe Mount Swivel Jack # TJP-5002S-B Be Changed To a Wheel?
    The foot plate on the Round, Pipe Mount Swivel Jack # TJP-5002S-B is welded to the inner tube and cannot be replaced with a wheel unless you were to cut it off and weld on a wheel. We do have the Bulldog Round, Pipe-Mount Swivel Jack # BD1541150301 which will accept both a Wheel # BD500245 and Foot Plate # BD018098 if you want to be able to use either.
    view full answer...
  • Highest Capacity Jack w/ a Wheel
    Not much Michael! The pipe mount jacks we have like the item # TJP-5002S-B do not have wheels that are compatible or rated for 2,000 lbs. The highest capacity wheeled jack we have is the Ark Xtreme Off-Road Swivel Trailer Jack w/ 2 Wheels item # ORJW750BD and it tops out at 1,650 lbs. The Ark Xtreme item # ORJW750BD uses a no-drill bracket to clamp to your trailer's frame. It will give you 18" of lift.
    view full answer...
  • Is the Wheel/Foot Supposed To Be Loose On the Bulldog Round, Pipe-Mount Swivel Jack
    Yes, there will be play between the wheel part # BD500245 or foot part # BD018564 on the Bulldog Round, Pipe-Mount Swivel Jack part # BD1541150301. This is common across most trailer jacks as the tolerances between the inner tube and wheel/foot are not very precise.
    view full answer...
  • Wheel for DL22682 Dutton-Lainson 2000 lb Capacity Trailer Jack
    The foot plate of the Dutton-Lainson # DL22682 pipe mount swivel jack isn't removable, so a caster wheel wouldn't be easy to add. The Bulldog # BD1541150301 pipe mount jack is set up to accept a caster wheel like # JC-102. Keep in mind though, the # JC-102 wheel has a 1200 lb weight rating, which means that the jack's capacity would be limited to 1200 lbs when the caster is used. This is the only swivel pipe mount jack we offer in a 2000 lb capacity that could be used with a caster wheel.
    view full answer...
  • Solution for Replacing Ram Swivel Jack with Jack that Has Wheel Caster
    Since RAM jacks do not have a wheel caster adapter that can fit their jacks like the one you sent in a picture of our best solution is the Bulldog Pipe Mount Swivel jack part # BD1541150301 which fits the same pipe mount you have now and also can have a wheel caster used instead of a foot plate like # BD500245.
    view full answer...
    Image 1 for
  • Wheel Caster Recommendation for a Bulldog Jack part # BD1541150301
    Yes it will, the Bulldog Jack part # BD1541150301 that you referenced has a 2 inch diameter tube and the Pro Series 6", Detachable Caster w/ Pin part # PS1400750340 is designed to fit 2 inch diameter jack tubes so it would work well for you. The # PS1400750340 only has a 1,200 lb capacity.
    view full answer...
  • Recommended 2,000 Pound Pipe-Mount Swivel Trailer Jack
    I recommend taking a look at the Bulldog Round Pipe-Mount Swivel Jack # BD1541150301. This 2,000 pound trailer jack features a tubular swivel design that will let you swing the jack up for travel and down for use. It has a 2-1/2 inch female pipe mount that is designed to be welded onto the trailer with a Pipe Mount like # BD015279. It has a pull pin diameter of 5/8 inches and a total lift of 10 inches. I have attached the written installation instructions along with a short video demonstration...
    view full answer...
  • Solution for Bulldog Round, Pipe-Mount Swivel Jack Handle Hitting Frame
    Hi Ryan; we don't have an alternate handle for the # BD1541150301 or a way to convert it to a top wind. If you want to try modifying it I would cut off the tip of the knob on the handle. Based on the picture I don't think you would have to completely remove it and this would give you the clearance you need. With part of it intact it shouldn't be too hard to rotate/operate. You could also remove the knob completely. Otherwise, I would go ahead and move the pipe mount a little further back.
    view full answer...


< Previous
12



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Cole B
Installed by:
Cole B
Employee Adam E
Installed by:
Adam E
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Edited by:
Wilson B
Employee Thomas T
Video by:
Thomas T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924