Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1200 lbs. by Dutton-Lainson

Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1200 lbs. by Dutton-Lainson

Item # DL22300

lowest price pledge

Retail:$69.99

Our Price: $47.95

You Save: 31%
Trailer Jack

Orders above $99 qualify for Free Shipping

Shipping Weight: 16 lbs

Quantity: 
In Stock
Dutton-Lainson Trailer Jack Side Wind Swivel Jack with 6 Inch Wheel 800 lbs
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Side Frame Mount Jack
  • 1200 lbs
  • Sidewind Jack
  • No Drop Leg
  • Swivel Jack - Pull Pin
  • Bolt-On
  • Dutton-Lainson
  • 10 Inch Lift
  • With Wheel
Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1200 lbs. Lowest Prices for the best trailer jack from Dutton-Lainson. Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1200 lbs. by Dutton-Lainson part number DL22300 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (59)
  • Q & A (42)
  • Videos (2)
  • Photos
  • Why etrailer?

Dutton-Lainson Trailer Jack - DL22300

Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1200 lbs.


Features:

  • Bolt on mounting
  • Enclosed outer tube retards sand and dirt from contacting miter gears and heavy-duty Acme screw
  • Fits channel tongues up to 3" wide x 5" tall
  • All mounting hardware included
  • 2.5" Diameter mounting hole in swivel bracket fits most other brands of mounting hardware
  • Floating miter gears allow for proper clearance and easier operation
  • Maximum maneuverability from offset swivel caster assembly
  • Zinc plated TUFFPLATE finish for longer life
    • Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
  • Ergonomic hand grip with textured surface


Specs:

  • 10" Lift
  • Measurement of mounting plate: 6-3/4" x 5-3/4"
  • Capacity: 1200 lbs
  • 1-Year limited warranty


When hitching and unhitching loaded trailers, D-L tongue jacks are real back savers. These easy-to-install smooth operating tongue jacks can be mounted in a variety of ways on various sizes of trailer tongues. Heavy-duty D-L tongue jacks reduce physical effort required to maneuver a loaded trailer into hitching position or removing the trailer from a vehicle. All models are made from heavy-gauge steel for strength and durability.



22300 Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1200 lbs. by Dutton-Lainson Model 3400







Video of Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1200 lbs. by Dutton-Lainson


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dutton-Lainson Trailer Jack - Side Frame Mount Jack - DL22300 Review

Today were going to take a quick look at the Dutton Lainson side wind swivel trailer jack part #: DL22300. This jack is a bolt-on unit and it comes with all the hardware needed to be able to bolt the jack to your trailer frame. Its finished with Dutton Lainsons tough plate zinc plating. This finish helps make the steel corrosion resistant and makes the jack a good fit for marine applications. Its covered by a one year limited warranty and it has a capacity of 1,200lbs. The wheel on the bottom of the jack is 6 inches in diameter and the jack will extend out and provide 10 inches of lift.

Its designed to work with trailer frames measuring up to 3 inches by 5 inches. Theres also a nice handle included on the side wind setup to make extending and lowering the jack nice and easy. And thats it for our quick look at the Dutton Lainson side wind swivel jack part #: DL22300.


Customer Reviews

Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1200 lbs. by Dutton-Lainson - DL22300

Average Customer Rating:  4.7 out of 5 stars   (59 Customer Reviews)

Trailer Jack, Sidewind Swivel Jack with 6" Wheel - 1200 lbs.

- DL22300
by:

I needed one for my woodsplitter which has a 2”x2” tongue, this works great. It was easy to install and it makes raising and lowering my woodsplitter a breeze. I would highly recommend this product . I use my 4-wheeler to move my splitter and this works perfectly, glad I found it. thanks so much 179041



- DL22300
by:

Seems like a good jack so far. Fit the old jack bolt pattern perfectly. It is replacing a Fulton jack which was good for maybe 40 cycles up/down. 656792



- DL22300
by:

Trailer jack has functioning very good. The only problem is the finish is starting to corrode for some reason. I am going to try to put a coating of wax on it to see if it helps. The trailer jack is only used in the spring summer and fall and is stored inside and has never been out in the weather. The trailer jack is always inside in the winter. The finish is not adequate and I am not sure why the corrosion is taking place. 554669



- DL22300
by:

Perfect fit! I've looked all over to find a Jack that fit a 3in tongue. Thank you so much. Packaging was very neat and secure also. Great products 550983



- DL22300
by:

The product is doing the job it was purchased to do. The only negative on these galvanized products is that after a couple years they begin to show signs of rust on the surface that needs immediate attention. 545856



- DL22300
by:

Jack is very well made and installed easily enough. time will tell how it holds up but it looks like its going to be a good one 540372



- DL22300
by:

I am very pleased with the products I received, and the promptness with which they were received is better than that other online company! 528369



- DL22300
by:

Great product. Heavy duty, easy-to-install, delivered quickly, good price. 501286



- DL22300
by:

Ordered this boat jack...was missing one of the brackets in the parts bag...I called and received great customer service...they looked up the missing part and sent a replacement out to me asap. Jack works great so far and installed easily. Thanks 492050



- DL22300
by:

working good for small boat trailer. 468088



- DL22300
by:

Easily installed and was just what I had been looking for. Now we are off to Florida for the winter and will have an easy time stowing our car dolly when we park. 462835



- DL22300
by:

Great product! Bolted right on in minutes and works great. Thanks to etrailer.com, they made my day with their great service and products. 457487



- DL22300
by:

Fast delivery and great price 446182



- DL22300
by:

last trailer jack was sloppy and lose, this works very nice, seams to be well built and cranks smooth and easy. 444312



- DL22300
by:

This product worked perfectly and saved me a couple hundred! 438644



- DL22300
by:

Trailer tongue lift fit well, easy install, works great and I still using it. 411107


Comments

Still works fine

MAK - 07/26/2018

41494

- DL22300
by:

Excellent!! All parts were packaged well,and looked and functioned and fit perfectly...very happy. now, my boat trailer is safe for the road. 406436



- DL22300
by:

Happy. Got one a little heavier duty, working great! 378760



- DL22300
by:

Great purchase fast shipping item as described good correspondence . I will definitely buy from again !!! 372993



- DL22300
by:

Excellent Service...Excellent Product.. thanks 361679



- DL22300
by:

Very nice. Replaced 25 year old jack that had begun to grind. Easy install. Crank is very smooth. Quick shipping from etrailer. Thanks. 344275



- DL22300
by:

Purchased a swivel 1200 lb jack for a 19' center sole bay boat. The installation was easy and the jack works very well. Nice product. 343735



- DL22300
by:

Easy install. Good value. Excellent customer service. 318300



- DL22300
by:

Product was easy to install and performs as expected. Shipment was prompt. 317385


Comments

It is used frequently and performs well.

Butch T - 11/17/2017

31017

- DL22300
by:

Eaesy to install and works perfectly.Nice product!. 304549



- DL22300
by:

Great solid product. Easy to install ! 279141


Comments

Since I found you a couple of years ago, you are the best!!!!!! You carry top quality products at a great price and your site is helpful for all. I tell every one I meet about etrailer Keep it up!!

Scott N - 12/28/2017

32361

- DL22300
by:

Works great, I went to a bigger size, and all is good 278395



- DL22300
by:

Good value, worked as described! 273455



- DL22300
by:

Sturdy and easy to use. 265469



- DL22300
by:

I use this product on a shorelander boat trailer hauling a 16.5 ft Lund Mr. Pike. I have had no problems with this wheel jack. In fact it has performed admirably for me. 263332



- DL22300
by:

Rather good jack, it still works fine after a year. 249037



- DL22300
by:

Works great! Love it! 243564



- DL22300
by:

After 1 year I can say that my Trailer Jack, Side wind Swivel Jack with 6" wheel has made this old guys job moving, hitching and storing so much easier. It is installed on my 16 foot cargo trailer (Motorcycler Hauler). We have travelled all over the Eastern USA and Canada taking in the Calbot Trail Nova Scotia and the Florida Keys. There has only been the wife and I and both in our 60's and we have no problems now moving the trailer loaded or unloaded and it moves and stores easily. Great Product! 241238



- DL22300
by:

Just what it says, great product, fast shipping, awesome customer service 237075



- DL22300
by:

I have an old utility trailer (with a heavy piece of equipment sitting on it) that had no jack attached to it - couldn't really maneuver it very well. This jack is just what I needed - what a relief ! Very sturdy and well designed - Thanks ! 231482



- DL22300
by:

Pro: Seems well built. The swivel is much heavier duty than the original that came with the trailer. Well packed and all the mounting hardware was present. Con: No grease fitting for lube. 229440


Comments

It hasnt gotten a lot of use as its on a snowmobile trailer and we didnt have much snow. It has been outside all this time and no rust:

Shel - 10/06/2016

21444

- DL22300
by:

I purchased two of these jacks to mount on my portable welders so they could be rolled around by hand in the shop. Both installed easily without reading the instructions and function flawlessly. Although manufactured in China, they are of good quality and will serve my purpose well. The welder in the photos weighs just over 1400 pounds and pushes/rolls very easily on the shop floor. etrailer.com and their usual outstanding service provided these at a good price shipped rapidly. I will continue to use etrailer.com for my light trailer needs. 222543



- DL22300
by:

This an extremely well made trailer tongue jack at a reasonable price. I especially like the 6" wheel. My previous jack did not have a wheel and this wheel makes it much easier to move the trailer by hand when I need too. 220536



- DL22300
by:

The Jack is well made,too soon to see if it holds up to the elements. 212797



- DL22300
by:

Ez to install and a real back saver 190877



- DL22300
by:

Robust along with smooth plating. Functions well. Should last a good long while. Wheel size makes rolling easy. One complaint. Wish it was made in the USA. Thank our global economy. 188265



- DL22300
by:

Heavy duty. A lot better then the last jacks used. 187615



- DL22300
by:

Shipped / Delivered as promised - easy to install replacement 171886



- DL22300
by:

Outstanding. This was ordered for my 6x12 enclosed dirt-bike hauler because a fold-up model gives much better ground clearance when going on rough dirt roads. It is well-designed and well-put-together. The installation was a breeze and it works perfectly. I strongly recommend this jack. 160174



- DL22300
by:

My son put it together for me. And he didn't have any problems doing it. I asked him how he like it and he said that's the easiest one he has ever put together. So thank you so much. 158569



- DL22300
by:

This is a GREAT company to do business with. I have been burned many times ordering things over the interweb; but this company has it all together. I received my trailer jack in record time. It is just what I needed. The quality is exceptional for the low price I paid. I will recomend this company to everyone I know. Thanks etrailer, sort of restores a persons faith in humanity! 157503



- DL22300
by:

Everything was as advertised and shipped promptly at a good price, I will bookmark this site for future needs. 153837



- DL22300
by:

Replaced an identical model that was 10 years old and was seizing up. Though the same model this new one has a 200 lb higher rating and looks better built with some design changes that may improve longevity. 149684



- DL22300
by:

Heavy duty jack and a great price 148075



- DL22300
by:

This swing-back marine jack is a great buy and the materials are nice quality. I used this to replace my original 800lb. Fulton jack that came with my Shorelandr' double PWC trailer (long overdue). Since this jack is rated at 1200 lbs., I had to drill a larger hole on the trailer frame and on the jack swivel bracket, plus I had to move the pin from the right side to the left side of the jack (left side is meant for smaller pin/right side for larger/picture online is incorrect). This is a nicer jack than the original, the pin is heftier and the extra work was worth it. Time will tell how long it lasts around salt water. 146673


51
60
Show More Reviews

Ask the Experts about this Dutton-Lainson Trailer Jack
Do you have a question about this Trailer Jack?


  • Trailer Jack Recommendations for a 10,000 Pound A-Frame Trailer
  • A trailer jack only lifts part of the weight of the trailer and not the whole 10,000 pounds of your trailer. A 10K trailer would have a tongue weight of around 1,000 to 1,500 pounds. But the higher the capacity of the jack the easier it is for the jack to lift the weight and the longer it will last. A jack rated for 5,000 pounds such as # TJA-5000S-B is an option. You could add foot # JF-99 as well. I have linked a video review of the jack for you. If you'd prefer an electric jack...
    view full answer...

  • Bolt-On Trailer Jack for Small Ironton Utility Trailer
  • For your trailer you might like a rack and gear jack such as # BD169201. This jack will bolt around trailer frames or tongues that are up to 3"x5". This type of jack has the ability to draw the wheel up very close to the mounting bracket which means the clearance from where it mounts to the bottom of the wheel is only 7-1/2 inches when the jack is fully retracted. I have linked a video review of this jack for you. It isn't a swivel jack but since it can retract so far it is an alternative...
    view full answer...

  • Looking for Swivel Trailer Jack with Overall Length of 15 Inches or Less
  • The closest I can come to the measurement you mention is the Pro Series Pipe Mount Swivel Jack, part # PS1401060303. The total height of the jack when fully retracted is 16-5/8 inches tall, measured from the bottom of the foot plate to the top of the bracket where the handle assembly where the handle attaches to the jack tube itself. The center of the mounting pipe to the bottom of the foot plate measures 11-3/16 inches. This jack is a weld-on application, and you can see these dimensions...
    view full answer...

  • American Made Boat Trailer Jack Availability
  • The Dutton Lainson jacks are all made in America. I attached a link to a page that has all of the Dutton Lainson trailer jacks we offer. A very popular option is the part # DL22300 which is made in America.
    view full answer...

  • Moving a Trailer with 600 Pounds Tongue Weight Around a Flat Driveway
  • Electric jacks rarely have wheels on them because the wheel capacity is much lower than the jack capacity so it limits them if they have wheels. Instead of installing and removing a jack, I recommend a trailer dolly, # MT70225, which is rated for up to 600 pounds tongue weight. It does have a 1-7/8 inch ball but that is fine for a trailer dolly, even if the coupler takes a larger ball, because you aren't towing with the smaller ball, just moving the trailer around. I have used trailer...
    view full answer...

  • Distance From Mounting Bracket U-Bolt To Ground On Fulton Jack # F1413020134
  • I pulled the Fulton F2 Swing-Up Trailer Jack, part # F1413020134, from our warehouse and took a photo and some measurements for you. This jack has dual 7 inch wheels and features a sidewind handle. The jack has an adjustable mount, and is a bolt-on installation, and does feature a swing-up option. This jack fits up to 3 inch by 4 inch tongues, and has a weight capacity of 1600 lbs. I moved the mount to the position that would be lowest on the jack leg and measured the distance from...
    view full answer...

  • Swivel Trailer Jack with Bracket Height Under 12 Inches
  • Rack and gear jacks like # BD169201 can get low with a bracket height when retracted of only 7-1/2 inches. But rack and gear jacks are low capacity, 750 pounds, and do not swivel. Another low option is Fulton fixed jack # TJ12220301 which can actually get lower than even a rack and gear jack. This jack measures a mere 9 inches from the center of the mounting bracket to the bottom of the wheel. But it does not swivel. The lowest I can get on a swivel jack with a wheel is 12-3/4 inches...
    view full answer...

  • Trailer Jack Recommendation with Short Distance from Mounting Bracket to Bottom of Wheel
  • From the center of the mounting bracket down to the bottom of the wheel of the Dutton Lainson Jack part # DL22300 that you referenced measures 13 inches. Another low option is Fulton fixed jack # TJ12220301. This jack measures a mere 9 inches from the center of the mounting bracket to the bottom of the wheel. But it does not swivel.
    view full answer...

  • Side Winding Trailer Swivel Jack for a 2 Inch by 2 Inch Log Splitter Trailer Frame
  • Pro Series trailer jack # PSEJ10000101 would not fit well on a 2x2 inch trailer frame. It would be much to loose. But you can use a similar jack, # DL22300, for your 2x2 inch frame. I have included a picture that shows the hole spacing on this jack's mounting plate.
    view full answer...

  • Corrosion Resistant Trailer Jack for a Trailer with 2 Inch by 4 Inch Frame
  • I think the best choice is going to be a bolt-on Dutton-Lainson jack with a Zinc plated yellow chromate TUFFPLATE finish. If your trailer has a channel tongue, jack # DL22300 fits up to a 3 x 5 inch frame. If you have a square tongue use # DL22800. The finish on these jacks is very corrosion resistant. An aluminum jack that will fit your frame size is not available.
    view full answer...

  • Replacement Trailer Jack Wheels for a Bass Tracker Boat Trailer
  • We have lots of wheels for jacks, see link to the right. If you know the manufacturer and model/capacity of the jack that you have on your Bass Tracker boat trailer I can determine which is the proper wheel.
    view full answer...

  • Is Dutton-Lainson DL22300 Trailer Jack Manufactured in the USA
  • The Dutton-Lainson # DL22300 is proudly made in the USA.
    view full answer...

  • Availability of 1000-lb-Rated Dutton Lainson A-Frame Tongue Jack
  • We do carry trailer tongue jacks including products from Dutton Lainson. We offer the 1000-lb-rated side-wind tongue jack # DL22530 which comes without a wheel or foot and that can be installed either by welding or by bolting it to your trailer tongue. This jack provides 15-inches of lift height. All 1000-lb-rated a-frame tongue jacks are displayed on the linked page. I searched the Dutton Lainson website for your original part number and it no longer returns any results so it is...
    view full answer...

  • Recommended Swivel Jack For Carry-On Trailer With Low Ground Clearance
  • Since your trailer sits low I recommend a swivel jack. That way you can swivel the jack out of the way when you are towing the small trailer. The jack I recommend is the Dutton-Lainson Trailer Jack # DL22300. This is a 1,200 lb jack and it will fit trailer frames up to 3 inches wide and 5 inches tall. The jack swivels out of the way when you are towing and it has a 6 inch wheel so you can move the trailer around by hand when it is not being towed.
    view full answer...

  • Will etrailer Jack MJ-1206B or Dutton-Lainson Jack DL22300 Fit a 2x2 Inch Trailer Frame
  • You would have to bolt Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 10" Travel - 1,000 lbs Item # MJ-1206B directly to the trailer frame and not use the included brackets to bolt the jack around the frame. A 2x2 inch frame is too small to use the bolt-around brackets. You would need to use the 2 lowest holes in the bracket that is attached to the jack. You will also likely need shorter bolts and matching nuts, obtained locally, to bolt it on. The same goes for # DL22300. I...
    view full answer...

  • Mounting Height of Trailer Jack DL22300
  • From the center of the bracket to the bottom of the wheel, the jack is 13 inches when it is fully retracted. From the top mounting hole to the bottom of the wheel, the jack is 15 inches when fully retracted.
    view full answer...

  • Recommended Trailer Jack To Replace 1,000-lb Shelby Jack
  • We do have a replacement trailer jack that will work for you but it is not a Shelby. I recommend the Dutton-Lainson Trailer Jack, part # DL22300. This is a bolt-on jack that will fit trailers up to 3-inches wide and 5-inches tall. This jack has a 1,200-lb capacity and features a 6-inch wheel.
    view full answer...

  • Dutton-Lainson Trailer Jack # DL22300 Replacement Wheel # DL22440 Recommendation
  • It looks like you will need a Replacement 6 Inch Poly Wheel for Trailer Jacks, part # DL22440. This wheel is an exact replacement for your Trailer Jack, Sidewind Swivel Jack with 6 inch Wheel - 800 lbs. by Dutton-Lainson, part # DL22300.
    view full answer...

  • Recommended Futon Swivel Jack on Sled Bed Trailer With 6 Inch Tall Frame Member
  • We have a solution that will work for you, but none of the bolt-on trailer jacks we offer are compatible with a 6 inch tall trailer frame. For a trailer frame of that height, I'd recommend you use a weld-on jack like part # FTJ120W0301. This jack has a 1200 lb capacity, and easily swivels rearward for storage with the pull of a pin.
    view full answer...

  • Replacement Handle for Trailer Jack Sidewind Swivel Jack # DL22300 Dutton Lainson Model 3400
  • We do have a replacement handle for the Trailer Jack, Sidewind Swivel, # DL22300, Dutton Lainson model 3400. You will need Replacement Handle for Dutton-Lainson Sidewind Style Trailer Jacks - 600 - 1,000 lbs. (1996 and Newer), # DL22446. If the jack is older than a 1996 model, no handles are available.
    view full answer...

  • Selecting a Replacement Swivel Jack for a Venture Boat Trailer
  • Thank you for submitting a photo of your boat and trailer showing the trailer's bolt-on Fulton side-wind caster wheel swivel jack which you want to replace. When it comes to jacks - or for that matter to hitches - extra capacity is always a good thing. Since the incremental cost to go from a 1000-lb-rated jack to a 1600-lb-rated one is so small, it just makes sense to select a jack with more capacity than you need. This will help the jack last longer and make cranking it easier. The...
    view full answer...


Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Expert Research:
John H
Updated by:
Adele M
Expert Research:
Adam R
Video by:
Kathleen M
Expert Research:
Jeffrey L
Installed by:
Randy B
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.